Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Formulations
Food & Nutrition Formulations
Formulations
Cosmetics & Personal Care Formulations
Industries
Agriculture & Feed
Product Families
View All
Adhesives & Sealants
Automotive & Transportation
Building & Construction
Consumer Goods
Electrical & Electronics
Food & Nutrition
Healthcare & Pharma
HI&I Care
Industrial
Paints & Coatings
Personal Care
Printing & Packaging
Sustainability
Cosmetic Ingredients
Sustainable Cosmetic Ingredients
Food Ingredients
Plastics & Packaging
Cleaning Ingredients
CASE Ingredients
Products
Agrochemicals
Applications
View All
Animal Feed & Nutrition
Base Chemicals & Intermediates
CASE Ingredients
Cleaning Ingredients
Composite Materials
Cosmetic Ingredients
Elastomers
Fluids & Lubricants
Food Ingredients
Industrial Additives & Materials
Pharmaceuticals & Nutraceuticals
Pigments & Colorants
Plastics
Ready-to-Use Products
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Automotive & Transportation
Automotive
Exterior & Body
Products in Exterior & Body: Laminate
35 Products found in Exterior & Body
Filters
Suppliers
Product Families
End Uses
Functions
Chemical Family
Products
Brands
Suppliers
Formulations
Documents
Relevance
Arlon Electronic Materials
Arlon® 33N
Polymer Name:
Polyimide (PI)
Functions:
Laminate, Prepreg
33N is a flame retardant (UL94 V-O) polyimide laminate and prepreg system where the excellent high performance properties of polyimide need to be combined with flame retardance. High Tg (250°C) results in low overall z-axis expansion, and minimizes risk of latent PTH defects in-service.
ACP Composites
ACP Composites Carbon Fiber Twill Weave Veneers
Functions:
Laminate
Reinforcement Material:
Carbon Fibers
Processing Methods:
Prepreg Processing
End Uses:
Dashboards
ACP Composites Carbon Fiber Twill Weave Veneers are an outstanding decorative laminate with a deep, glossy, three-dimensional finish ideally used in high-end decorative projects. Manufactured with a clear, resin-rich carbon-fiber prepreg these veneers deliver a smooth, low porosity laminate with a mirror-like finish without the need for a clear coat to enhance the appearance.
The Gill Corporation
Gilliner® 1076D Type 20
Functions:
Laminate
Reinforcement Material:
Glass Fibers
End Uses:
Bulkheads, Side Panels
Gilliner® 1076D is a high wear resistant Grade liner constructed from woven E-glass Cloth with a polyester resin system introduced specifically for use in the B737 lower sidewall. This product features resin rich surfaces to address wear through over frame sections and attach points that are associated with repetitive bulk cargo loading.
Accurate Plastics, Inc.
Acculam™ Phenolfab Canvas CYBS
Functions:
Laminate
Acculam™ Phenolfab Canvas CYBS is a laminate sheet comprised of a phenolic resin binder and woven canvas (cotton) substrate with graphite added to enhance self-lubrication.This material is characterized by good mechanical properties and toughness. It has similar mechanical properties to C/CE. It is not intended for applications needing electrical resistance. It has good machining qualities and good wear resistance.
Accurate Plastics, Inc.
Acculam™ Epoxyglas HT-ESD
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Acculam™ Epoxyglas HT-ESD comprised of an epoxy resin binder and a woven glass substrate. Surface properties are Electro Static Dissipative on 1 or 2 sides.Static dissipative properties are embedded in surface layer(s) making this ideally suited as test fixture material for printed circuit boards. Examples: Solder pallets, Assembly fixtures, Automated test equipment, ATE fixtures, and Electronic assembly workstation surfaces.
NMG Composites
NMG Composites Laminate G Ply - GY
Polymer Name:
Polypropylene (unspecified), Polyamide 6 (PA 6), Polyethylene (unspecified)
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Laminate G Ply - GY continuous fiber reinforced thermoplastic laminate single-layer tape or sheet is a thermoplastic composite material formed by hot pressing-cold pressing and other processes after angle layup design.
ISOVOLTA Group
ISOVAL® 10 R
Functions:
Laminate
Polymer Name:
Epoxy Resins & Compounds
Reinforcement Material:
Glass Fibers
End Uses:
Structural Components
ISOVAL® 10 R is made of glass roving fabric using the temperature-resistant ISOVAL® epoxy resin system. This gives the material excellent heat resistance and high compressive strength even at elevated temperatures with low thermal conductivity at the same time. The laminate has a permanent temperature resistance of 180 °C.
Arlon Electronic Materials
Arlon® 85N
Polymer Name:
Polyimide (PI)
Functions:
Laminate, Prepreg
85N is the ultimate polyimide and laminate prepreg system fo PWB's requiring resistance to high temperature, both in process and in end-use applications. Bromine-free chemistry provides Bestin-Class thermal stability for applications with sustained high in-use temperatures as well as for use in lead-free soldering applications.
ACP Composites
ACP Composites Carbon Fiber Unidirectional Sheets
Functions:
Laminate
Reinforcement Material:
Carbon Fibers
Processing Methods:
Prepreg Processing
ACP Composites Carbon Fiber Unidirectional Sheets offer maximum tensile and bending stiffness along a single axis. All of the fibers run in the zero direction or parallel to the length of the part. Our proprietary Autoclave curing process produces the most consistent carbon fiber sheets possible. Manufactured using 100% real carbon fiber fabric preimpregnated with high quality epoxy resin, these sheets are cured at high temperatures and pressure to ensure a strong, rigid product that cannot be reshaped after cured. Unlike a wet layup, our Autoclave curing process consistently yields flat, lightweight sheets with minimal voids, waves or buildups.
Accurate Plastics, Inc.
Acculam™ Epoxyglas G10/FR4
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Acculam™ Epoxyglas G10/FR4 is a laminate sheet comprised of a flame retardant epoxy resin and a woven fiberglass substrate. This grade qualifies to NEMA FR4 and MIL-I-24768/27.This material has high mechanical strength and excellent electrical insulating qualities in both dry and humid conditions. These attributes along with good fabricating characteristics allow this grade to be used in a wide variety of electrical and mechanical applications.
Von Roll Isola
Vetronite® EGS 103
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Vetronite® EGS 103 is composed of epoxy matrix and glass fabric reinforcement. it appears in Green beige color with EP GC 203 G-11 Standards.
Franklin Fibre
Lamitex® X PF CP 21
Functions:
Laminate
Polymer Name:
Phenol Formaldehyde (PF)
End Uses:
Wall Panels, Washer, Spacer, Side Panels
Lamitex® X PF CP 21 paper/phenolic laminated sheet is primarily intended for mechanical applications. It has high relative mechanical properties but low electrical characteristics when compared to XX and XXX type materials. Special precautions must be taken to prevent cracking if the material is to be tapped or machined parallel to the laminations. Grade X laminate is frequently specified for use as mounting blocks or panels, washers and spacers.
Xamax Industries
FloLam® PR
Functions:
Laminate
End Uses:
Showers, Profiles, Tubs, Roof Panels, Dashboards
The FloLam® PR surfacing film integrates a special release film with the FloLam® surface laminate and therefore includes all the benefits of the FloLam® surface laminate. Additonally, the use of the release film allows a clean and easy removal from the composites without transfer of any residues. The surfacing film also acts as a protective cover to the composite that can be removed by the end user later on.
ACP Composites
ACP Composites Carbon Fiber High Gloss Woven Sheets
Functions:
Laminate
Reinforcement Material:
Carbon Fibers
Processing Methods:
Prepreg Processing
End Uses:
Door Panels, Dashboards
ACP Composites Carbon Fiber High Gloss Woven Sheets are an outstanding decorative laminate with a deep, glossy, three dimensional finish. Our proprietary Autoclave curing process produces the most consistent and highest quality gloss carbon fiber sheets possible. Manufactured using 100% real carbon fiber fabric pre-impregnated with high quality epoxy resin, these sheets are cured at high temperatures and pressure to ensure a strong, rigid product that cannot be re-shaped after cured. Unlike a wet layup, our Autoclave curing process consistently yields flat, lightweight sheets with minimal voids, waves or buildups.
Toray
Toray Cetex® TC910
Functions:
Laminate
Polymer Name:
Polyamide 6 (PA 6)
Processing Methods:
Compression Molding
End Uses:
Tanks
Toray Toray Cetex® TC910 is a thermoplastic composite using a polyamide 6 (PA6) matrix resin. This product provides excellent mechanical performance at a good price-to-weight ratio. It features high strength and wear resistance and performs well at elevated temperatures. TC910 is also resistant to solvents. As a result of these attributes, Toray Cetex® TC910 is commonly used in a variety of automotive and transportation Applicationss. Secondary details in the final part may be injection overmolded using injection-grade polyamides. Toray Cetex® TC910 is available in glass or carbon reinforced UD tapes. Nylon 6-based Thermoplastic Composite. Indefinite at 25°C (77°F).
ACP Composites
ACP Composites Carbon Fiber Plain Weave Veneers
Functions:
Laminate
Reinforcement Material:
Carbon Fibers
Processing Methods:
Prepreg Processing
End Uses:
Dashboards
ACP Composites Carbon Fiber Plain Weave Veneers are an outstanding decorative laminate with a deep, glossy, three-dimensional finish. Manufactured with a clear, resin-rich carbon-fiber prepreg these veneers deliver a smooth, low porosity laminate with a mirror-like finish without the need for a clear coat to enhance the appearance. As the thinnest of our carbon fiber sheets, these veneers are easy to trim and cut. The single layer of 3K plain weave carbon fiber prepreg allow the sheets to be semi-flexible yet remain stiff like cardstock. They can bend in only one direction at a time making it suitable for either flat surfaces or pipes. Once cured, these sheets cannot be re-shaped. Therefore they will not lie flat on compound curves, convex or concave surfaces.Our proprietary Autoclave curing process produces the most consistent and highest quality gloss carbon fiber veneers possible. Manufactured using 100% real carbon fiber fabric pre-impregnated with high quality epoxy resin, these sheets are cured at high temperatures and pressure to ensure a strong, rigid product that cannot be re-shaped after cured. Unlike other manufacturing methods, our Autoclave curing process consistently yields flat, lightweight sheets with minimal voids, waves or buildups. These 1st quality sheets are manufactured with a clear, resin-rich carbon fiber prepreg which results in a smooth, low porosity laminate with a mirror-like finish. Our special blend of high strength epoxy resin guarantees a durable, stronger, longer lasting finish. The built in UV inhibitor in the 2x2 twill prepreg resists UV rays in outdoor applications. There is no need for fillers, gel coats or surface treatments to enhance the surface appearance of our sheets.
Accurate Plastics, Inc.
Acculam™ Epoxyglas G11/FR5
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Acculam™ Epoxyglas G11/FR5 comprised of flame retardant/heat resistant epoxy resin and a woven fiberglass substrate. It qualifies to NEMA FR5 and MIL-I-24678/28.This material exhibits extremely high mechanical strength at elevated temperatures. It shows good dielectric loss and electric strength properties under both dry and humid conditions. It has good chemical resistance and low moisture absorption.
Von Roll Isola
Vetronite® G-11
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Vetronite® G-11 is composed of epoxy matrix and glass fabric reinforcement. it appears in Yellow brown color with EP GC 203/306/308 G-11 Standards.
Xamax Industries
FloLam®
Functions:
Laminate
End Uses:
Showers, Profiles, Tubs, Roof Panels, Dashboards
FloLam® surfacing laminates were designed to provide a smooth, resin rich surface over the top of various thermoplastic substrates where esthetics and surface quality are demanded. It is specially engineered to withstand the rigorous processing temperatures of any continuous fiber reinforced thermoplastic materials (CFRTP) systems and thermoplastic sandwich panels. The FloLam® surfacing film and laminate provides a substantial level of protection and surface cleanliness to a broad range of surfaces, even under long term exposure to UV light, moisture and bacteria. With exceptional UV protection, weatherability and abrasion resistance, our FloLam® surface laminate is well suited for many outdoor applications, and typically provide fade resistance and color stability over long-term exposure.
ACP Composites
ACP Composites Fiberglass Sheets - Natural
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Processing Methods:
Prepreg Processing
ACP Composites Fiberglass Sheets - Natural are solid, high strength laminates consisting of fiberglass prepreg reinforced with high strength epoxy resin. They are FR4 grade fire retardant and can be safely substituted where G10 is called for. Fiberglass Sheets are Autoclave cured at high temperatures and pressure to ensure a strong, rigid product that cannot be re-shaped after cured. Unlike with a wet layup, Autoclave curing consistently yields flat, lighter weight sheets with minimal voids, waves or buildups.
ACP Composites
ACP Composites Fiberglass Sheets - Black
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Processing Methods:
Prepreg Processing
ACP Composites Fiberglass Sheets - Black are solid, high strength laminates consisting of fiberglass prepreg reinforced with high strength epoxy resin. They are FR4 grade fire retardant and can be safely substituted where G10 is called for. Fiberglass Sheets are Autoclave cured at high temperatures and pressure to ensure a strong, rigid product that cannot be re-shaped after cured. Unlike with a wet layup, Autoclave curing consistently yields flat, lighter weight sheets with minimal voids, waves or buildups.
Toray
Toray Cetex® TC960
Functions:
Laminate
Processing Methods:
Compression Molding
End Uses:
Tanks
Toray Toray Cetex® TC960 is a polypropylene-based thermoplastic uni-directional tape. It is part of Toray’s CFRT® (continuous fiber reinforced thermoplastic) line of industrial thermoplastic composites. This thermoplastic composite is designed for Applicationss that require high impact resistance, but where cost is a factor. The impact toughness of glass fiber/ polypropylene composites make them ideal for use in truck bodies, vehicles, and vehicle enclosures. Polypropylene Thermoplastic Composite. Indefinite at 25°C (77°F).
Industrial Summit Technology
SKYBOND® 703
Chemical Family:
Polyimides (PI)
End Uses:
Engine Compartments, Engine Hoods, Engine Cowlings, Varnishes
Features:
Heat Resistance
SKYBOND® 703 is a heat reactive aromatic resin which can be thermally cured to a crosslinked polyimide. It is specifically designed for structual, and specialty applications where extended high temperature exposure is required. It represents an excellent balance of processing advantages and high thermal stability .Excellent strength retention is maintained up to temperatures of 650° F.
Accurate Plastics, Inc.
Acculam™ Epoxyglas G11 nonFR
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Acculam™ Epoxyglas G11 nonFR comprised of heat resistant/halogen free epoxy resin and a woven fiberglass substrate. It qualifies to NEMA G11 and MIL-I-24768/3This material exhibits extremely high mechanical strength at elevated temperatures and has good dielectric loss and electric strength properties under both dry and humid conditions. It is resistant to flow, dimensional change, chemicals and has low moisture absorption.
Arlon Electronic Materials
Arlon® 35N
Polymer Name:
Polyimide (PI)
Functions:
Laminate, Prepreg
End Uses:
PCB Materials
35N is a pure polyimide laminate and prepreg system for applications requiring high temperature performance. High Tg (250°C) results in low Z-direction expansion for resistance to PTH failure during PWB processing, and minimizes risk of latent PTH defects in-service. Reduced temperature and time to cure offers improved throughput compared to traditional polyimide cycles.
Accurate Plastics, Inc.
Acculam™ Phenolfab Linen L/LE
Functions:
Laminate
Acculam™ Phenolfab Linen L/LE comprised of a phenolic resin and a woven linen (cotton) substrate. This material qualifies to NEMA L/LE and MIL-I-24768/13/15.This material's improved moisture resistance and machining characteristics allow its use in a wider range of electrical and structural applications than paper grades. Its finer weave fabric also allows for finer machined details& thinner sheets than grades C and CE.
Accurate Plastics, Inc.
Acculam™ Phenolfab Canvas C/CE
Functions:
Laminate
Acculam™ Phenolfab Canvas C/CE is a laminate sheet comprised of a phenolic resin binder and woven canvas (cotton) substrate. It qualifies to NEMA C & CE and MIL-I-24768/14/16.This material is characterized by good mechanical properties and toughness. It has higher impact strength than NEMA XX grades. Its good machining qualities, moisture resistance and excellent wear resistance can be used in a wide variety of applications.
Accurate Plastics, Inc.
Acculam™ Phenolfab Canvas
Functions:
Laminate
Acculam™ Phenolfab Canvas is a laminate sheet comprised of a phenolic resin binder and woven canvas (cotton) substrate with graphite added to enhance self-lubrication.This material is characterized by good mechanical properties and toughness. It has similarmechanical properties to C/CE. It is not intended for applications needing electrical resistance. It has good machining qualities and good wear resistance.
The Gill Corporation
Gilliner® 1566D020
Functions:
Laminate
Reinforcement Material:
Glass Fibers
End Uses:
Side Panels
Gilliner® 1566D is a high wear resistant liner constructed from woven E-glass Cloth with a modified vinyl ester resin system introduced specifically for use in the B737 lower sidewall. This product features resin rich surfaces to address wear through over frame sections and attach points that are associated with repetitive bulk cargo loading.
Accurate Plastics, Inc.
Acculam™ Epoxyglas G10 nonFR
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Acculam™ Epoxyglas G10 nonFR comprised of a halogen free epoxy resin binder and a woven fiberglass substrate. It qualifies to NEMA G10 and MIL-I-24768/2.This material exhibits high mechanical strength and electrical insulating qualities under both dry and humid conditions. Its ease of fabrication allows its use in many structural and cryogenic applications where halogenated compounds may be undesirable.
Von Roll Isola
Vetronite® EGS 619
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Vetronite® EGS 619 is composed of epoxy matrix and glass fabric reinforcement. it appears in Light green color with EP GC 202 FR-4 Standards.
Accurate Plastics, Inc.
Acculam™ Epoxyglas Cowskin
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Acculam™ Epoxyglas Cowskin comprised of an epoxy resin binder, woven glass substrate and tough outer skins for improved surface wear resistance.This material has high mechanical strength in both dry and wet conditions. It is engineered as a carrier material in the polishing of hard disk drives and silicone chips. Its tough outer skins protect against exposing abrasive glass fibers and extend normal carrier life by more than five times.
Xamax Industries
FloLam® PR+
Functions:
Laminate
End Uses:
Showers, Profiles, Tubs, Roof Panels, Dashboards
The FloLam® PR+ is the ultimate enhancement for thermoplastic composites for both surface protection and esthetics. It is specially engineered to produce a close to Class “A” finish – no surface voids.
Accurate Plastics, Inc.
Acculam™ Siliglas G7
Functions:
Laminate
Reinforcement Material:
Glass Fibers
Acculam™ Siliglas G7 comprised of a high performance silicone resin and a woven fiberglass substrate. It qualifies to NEMA G-7 and MIL-I-24768/17.This material has high heat resistance, low dissipation factor, and excellent arc resistance. It is flame resistant with low smoke evolution, and meets the needs of Class "H" insulation. It is used in high frequency telecom equipment, transformers and items subjected to high heat.
Arlon Electronic Materials
Arlon® 35NQ
Polymer Name:
Polyimide (PI)
Functions:
Laminate, Prepreg
35NQ is a pure polyimide laminate and prepreg system. Reinforced with woven Quartz fabric, combining the advantages of a reduced cure cycle, high temperature polyimide system (Tg >/=250°C), with low dielectric constant and loss tangent (DK = 3.5, loss 0.009 at 1 MHz) for applications requiring operation at RF/Microwave frequencies. Polyimide Quartz materials also exhibit reduced in-plane CTE for expansion matched SMT applications.