Products in Ready-to-Use Products: Polyesters

Laricol 1465 is a thermoplastic reactivable adhesive made from polyester-based thermoplastic polyurethane. It is available in the form of white pellets. This type of adhesive is designed to be reactivated upon the application of heat, providing a convenient and effective bonding solution in various applications.

Crestafix® 90-82PA HP Polyester Bonding Paste is a pre-accelerated polyester bonding paste. It is a viscous, white, and filled compound specifically designed for the assembly and bonding of GRP moldings, including panels, inserts, internal frames, ribs, composite constructions, and car body components. It is a high-productivity grade designed for use with narrow mixers that will dispense at a high flow rate while maintaining thixotropic properties upon vertical application.

Crestafix® 90-79PA Polyester Bonding Paste is a pre-accelerated orthopthalic polyester bonding paste. They are non-sagging-filled compounds especially designed for the assembly and bonding of GRP moldings. Such applications include panels, inserts, internal frames, ribs, and any other non-structural bonding applications.

Crestafix® 90-84PAHV Polyester Bonding Paste is a lightweight, low-exotherm, pre-accelerated orthophthalic polyester bonding paste. It is a non-sagging compound designed for non-structural applications where gap filling may be a secondary requirement. It offers no sagging on vertical surfaces and is highly thixotropic.

Crestamould® B12R Sealer is a MEKP catalysed, brushable, slightly thixotropic sealer designed to coat expanded and extruded polystyrene foams. It acts as a chemical bridge and barrier between the polystyrene foam and either a laminate or a machinable polyester-based tooling paste such as Crestamould T27/T28. Its main use is for sealing of polystyrene foam blanks used in 5-axis plug and pattern work.

The Myflex series is a unique and sophisticated blend of polymers that demonstrates unusual toughness, flexibility, adhesion, gloss, and weatherability. The nature of the system requires uncommon solvents to achieve solution. As a result, the printed film has resistance to a variety of solvents and chemicals. Myflex is especially formulated for and has a natural adhesion to raw polyester film such as Mylar.

POL series is a very high solids ink and does not dry out in the screen. It is the best choice for low solvent loss and the finest in environmentally safe products. POL series is a new class of polyester polymers that when baked, yields a duarable weatherable film that can be screen printed and/or roll/coil coated.

ECP 534 Static Dissipative Powder Coating for used in the electronics industry where ESD (electro static discharge) is to be avoided.ECP 534 is a static dissipative powder coating based on a carboxylated polyester resin modified with epoxies. Designed where the user requires anti-static electrostatic dissipative properties in addition to a superior decorative finish eg, static-safe workbenches, racks, trolleys etc, it offers excellent flow, toughness and good chemical resistance. A range of substrates may be coated.

Metabond is a new class of decorative coating originating from a polyester backbone which is blended with a high quality durable cross-linker. This blend of high tech formulating combines with the best in available raw materials to yield MBI series, the coating with excellent weatherability, chemical resistance, gloss, abrasion resistance and ease of printing.

114-26 B is a medical grade, electrically conductive, polymer coated polyester film composition. It is typically used as a component for fabricating electrodes in medical testing applications. This product has been formulated to have improved conductivity and high electrical dissipation properties. Some added applications for 114-26 B include, but are not limited to, emi/rfi shielding, polymer thick film circuitry, membrane switches and electrical static dissipation. 114-26 B is available in rolls ranging in widths up to 20 inches and lengths up to 2000 feet.

Pacur® PETG FOAM is a co-extruded combination of PETG Copolyester resin with a proprietary foamed core made from Eastman’s EastaliteTM System. PETG FOAM offers advantages over traditional materials where low weight and sustainability are larger parts of an application’s fitness for use requirements. PETG FOAM is a reliable, safe alternative to high impact polystyrene (HIPS) in the opaque rigid medical packaging market. PETG FOAM also shows considerable manufacturing improvements over HIPS in terms of processing, waste reduction, and reduced cleaning; all resulting in lower overall processing costs.

Metabond is a new class of decorative coating originating from a polyester backbone which is blended with a high quality durable cross-linker. This blend of high tech formulating combines with the best in available raw materials to yield MBI series, the coating with excellent weatherability, chemical resistance, gloss, abrasion resistance and ease of printing.

Metabond is a new class of decorative coating originating from a polyester backbone which is blended with a high quality durable cross-linker. This blend of high tech formulating combines with the best in available raw materials to yield MBI series, the coating with excellent weatherability, chemical resistance, gloss, abrasion resistance and ease of printing.

Interplastic Corporation PA-176-PMMF is a isophthalic adhesive designed for resistance to fuels.

Interplastic Corporation PA-170-PMHN is a high density polyester isophthalic adhesive.

Interplastic Corporation PA-150-PHHN (general purpose) has a high density polyester adhesive.

Arjay Technologies 4001 Core Bonding possesses flexible gel times.

TIGER Drylac® 038/60014 is a polyester tgic super durable powder coating compliant to AAMA 2604 with excellent weather resistance properties for high performance architectural exterior applications.

TIGER Drylac® 038/30033 is a polyester tgic super durable powder coating compliant to AAMA 2604 with excellent weather resistance properties for high performance architectural exterior applications.

Continental Coatings 8701 Series Polyester Power Coating are designed for application where superior weathering and ultra-violet resistance are required.

K-Bond Polyester Transparent Flowing is a premium quality polyester adhesive that has been designed with the stone fabricator and installer in mind. It has been engineered to have the best possible ratio of working time to curing speed possible. Uses include bonding, laminating, installation of pieces, and repairs.

IBA Kimya San. ve Tic. A.S. FF35 is a thermosetting powder coatings based on epoxy and polyester resins designed for interior applications. It has good yellowing resistance combined with excellent overall performance.

Eternal Materials 2976PT is an unsaturated polyester based structural adhesive.

TIGER Drylac® 038/30028 is a polyester tgic super durable powder coating compliant to AAMA 2604 with excellent weather resistance properties for high performance architectural exterior applications.

K-Bond Polyester Buff Flowing is a premium quality polyester adhesive that has been designed with the stone fabricator and installer in mind. It has been engineered to have the best possible ratio of working time to curing speed possible. Uses include bonding, laminating, installation of pieces and repairs.

Cardinal Paint and Powder Tractor Yellow 90 Gloss C209-YL130 is a smooth gloss tractor yellow color used for polyester powder coating.

ONE-WAY 2M is a ultra-thin, strong, linear polyester polyurethane biased splicing tape for use on abrasive belt butt splices with E and F weight paper backings.

Erie Powder Coatings P9099-G3R Satin Clear TGIC is a satin glass and it has excellent clarity.

TIGER Drylac® 038/40025 is a polyester tgic super durable powder coating compliant to AAMA 2604 with excellent weather resistance properties for high performance architectural exterior applications.

TIGER Drylac® 038/10070 is a polyester tgic super durable powder coating compliant to AAMA 2604 with excellent weather resistance properties for high performance architectural exterior applications.

DBF Lite is designed for use when fast pot life is required. It is also designed so that it can be spread smoothly and can be sanded and shaped for several days. DBF Lite is a great plug filler for marine or automotive dent repair and many other uses.

Detroit Body Filler 60238-50 a non-flowing, pumpable adhesive. 60238-50 should be used for bonding, fairing, filling, and radius applications. This product is designed to have good vertical hang and stack abilities but maintains high flow volumes. 60238-50 is designed to provide a product with an eight-pound weight/gallon with excellent adhesive properties. Gel times can be varied for specific customer needs.

TIGER Drylac® 038/15003 is a polyester tgic super durable powder coating compliant to AAMA 2604 with excellent weather resistance properties for high performance architectural exterior applications.

ARON MELT® PES310S30 is a collection of thermoplastic polyester hot melt adhesives. They offer excellent durability, and are designed with various resin properties by combinations of monomers.

IBA Kimya San. ve Tic. A.S. FF87 is a thermosetting powder coatings based on epoxy and polyester resins designed for interior applications. It has excellent flow out and good yellowing resistance.

Superior Water‐Clear Polyester adhesives are used for laminating and seaming natural stone including light colored marbles such as white marble. Cured with 1%‐2% clear liquid hardener (MEKP), these adhesives have a gel time of 10‐20 minutes and are fully cured in 2‐4 hours. Shelf life of this product at room temperature averages about one year. Available in Flowing and Knife Grade.