Products in Composite Materials: Pipe Reinforcement

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

CompositeWrap™ BDC20 Carbon Fabric is a medium weight, high tensile strength bidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ BDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

A non-draining, 100% solids, no VOCs epoxy system for producing fiber reinforced epoxy composites. A single resin (StrongBond™ 400A Saturant Resin-Part A) with available choices of curing agents provides the maximum flexibility for a variety of fiber reinforced applications

CompositeWrap™ UDC20 Carbon Fabric is a medium weight, high tensile strength unidirectional carbon fabric. This material is engineered to provide extremely strong, durable and lightweight composites for structural reinforcement. CompositeWrap™ UDC20 Carbon Fabric is easy to apply, corrosion resistant and can be applied at any thickness required to provide adequate structural reinforcement. It easily wets out and can be installed using the wet lay-up technique.

E-LT 1800-P is a E-Glass fiber type.

Aekyung Chemical CW-220 is an iso type UPR.

C-L 0900 is a carbon fiber type.

Hollingsworth & Vose Co. 8000015 has the ability to convert specialty fibers into affordable, easy-to-use fabrics. Our Advanced Fiber Nonwovens Group (AFN) delivers outstanding value to aerospace, corrosive tank/pipe, radar signature management, thermal insulation, sporting goods, and EMI shielding applications.

3B Fiberglass R25H consist of continuous glass filaments bonded into a single strand and wound onto a bobbin shape. A proprietary sizing applied on the fibers assures excellent resin-to-glass bonding.Corrosion resistant R25H Direct Rovings made of Advantex® glass are specifically designed for filament winding processes (continuous or discontinuous) for the manufacturing of composite pipes. The silane sizing of R25H is designed for excellent adhesion to thermoset resins and is also drinking water contact approved. Also, combination of high temperature resistance of E-CR Advantex® glass and easy texturisation of R25H Direct Rovings make them ideal for muffler filling.R25H Direct Rovings made of Advantex® glass are also used in pultrusion or weaving-knitting processes under specific conditions; contact us for further assistance.

E-LT 2400 is a E-Glass fiber type.

468HS roving is used in filament winding and pultrusion applications in epoxide resin systems. The direct rovings can be used to manufacture pipes, tanks and gas cylinders.

C-LT 2200 is a carbon fiber type.

E-QX 2600 is a E-Glass fiber type.

3B Fiberglass CR 6202 is a non-woven mat made from 3B E-CR glass filaments, consisting of chopped fibers randomly and yet evenly orien-tated. The 50 mm length chopped fibers are coated with silane coupling agent and are held together using emulsion binder. CSM is particularly suitable for hand lay-up process using thermoset resin systems to manufacture wide range of products for automobile, recreation, chemical, electrical industries.CSM EM1011 conforms to BS 14118 and IS 11551.

Aekyung Chemical CW-350 is a tere type UPR.

E-T 0900 is a E-Glass fiber type.

E-LT 2900 is a E-Glass fiber type.

3B Fiberglass SE 1043 consists of continuous glass filaments bonded into a single strand and wound onto a bobbin shape without twist. A proprietary sizing applied on the fibers assures an excellent resin-to-glass bonding. Corrosion resistant SE 1043 Fibreglassmade of E-CR glass is specifi-cally designed for the manufacturing of composites pipes and under-ground & chemicals tanks. SE 1043 is also used in pultrusion to manufacture profiles and in weaving-knitting processes. SE 1043 is tested in compliance with BS 14020 and IS 11320.

Aekyung Chemical CW-2000 is an epoxy acrylate.

Hollingsworth & Vose Co. 8000028 has the ability to convert specialty fibers into affordable, easy-to-use fabrics. Our Advanced Fiber Nonwovens Group (AFN) delivers outstanding value to aerospace, corrosive tank/pipe, radar signature management, thermal insulation, sporting goods, and EMI shielding applications.

Hollingsworth & Vose Co. 8000116 has the ability to convert specialty fibers into affordable, easy-to-use fabrics. Our Advanced Fiber Nonwovens Group (AFN) delivers outstanding value to aerospace, corrosive tank/pipe, radar signature management, thermal insulation, sporting goods, and EMI shielding applications.

Owens Corning M130 chopped strand mat represents a general-purpose solution for open mold hand lay-up applications in a variety of industries. Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning. Made of medium tex, chopped strands randomly dispersed and bonded together by a highly soluble polyester powder binder. Certified by Lloyd’s Register of Shipping (Pending).

E-LT 1200-P is a E-Glass fiber type.

Owens Corning 158B Roving is specifically designed for use in filament winding applications using epoxy resin, where high strength is required. 158B is suitable to reinforce phenolic resins. Fast wet-out properties and high burst strength maximize customers’ processing and minimize costs. 158B Type 30™ single-end roving is specifically designed for use in filament winding applications using epoxy resin where high strength is required. Produced with patented Advantex® corrosion resistant E-CR glass by Owens Corning. Suitable to reinforce phenolic resins..

E-QX 5600 is a E-Glass fiber type.

3B Fiberglass 399 Direct Rovings consist of continuous filaments bonded into a single strand and wound onto a bobbin shape. A proprietary sizing applied on the fibers assures an excellent resin-to-glass bonding.Corrosion resistant 399 Direct Rovings made of Advantex® glassare specifically designed for pultrusion process and are compatible with thermosets resins. They are the materials of choice for the manufacturing of high quality profiles. 399 Direct Rovings made of Advantex® glass are also used in filament winding process under specific conditions; contact us for further assistance.

C-4QX 9400 is a carbon fiber type.

C-LT 1800 is a carbon fiber type.

E-QX 9000 is a E-Glass fiber type.

Australian Composites Auspreg UV is a range of UV curable resin impregnated fiber glass prepregs which have been especially designed to cure from a wet plyable form to a completely hard product within minutes through exposure to either outdoors sunlight or high intensity artificial light. The technology is useful for repairing a whole range of surfaces and parts as a long term structural solution to wood, bitumen, concrete, metals and enables repair of damaged materials without the need for costly replacement. It is also highly effective in creating and manufacturing products in place of traditional hand lay up manufacturing, infusion systems, and oven cure methodologies.

468A roving is used in filament winding, pultrusion and weaving applications in epoxide resin systems. The direct rovings can be used to manufacture pipes, tanks and other insulations.

468B-1103 is a Twist‑free and alkali‑free direct yarn, suitable for winding process, mainly used for high‑pressure epoxy pipes. Suitable for epoxy resin ( EP ).

C-LT 1100 is a carbon fiber type.

E-QX 3500 is a E-Glass fiber type.