Products in Printing & Inks: Other Ink Types

Texicryl® 13-814 is a styrene acrylic copolymer aqueous dispersion with excellent flexibility and adhesion properties. It is suitable for use as the main binder in flexo or gravure inks and has good clarity so is suitable for offset overprint. This acrylic dispersion will also be suitable to compound into barrier coatings, as it exhibits very low MVTR and Cobb values.

Texicryl® 13-813 is a modified styrene acrylic copolymer designed for use in off-set overprinting varnishes. It has been formulated to give excellent gloss over print and superior holdout over unprinted areas. It may also be used for certain graphic arts applications to non-absorbent substrates.

Texicryl® 13-809 is a styrene acrylic emulsion polymer designed for high gloss, water-based overprint varnishes and heat resistant inks. This styrene acrylic binder has been designed to provide superb clarity, water resistance, heat resistance, gloss etc. It can be used as deblocking modifier.

RheoFal™ 101 is an easy dispersing organically modified bentonite clay. It is especially suited for low to medium polarity solvent-based paints and coatings. It provides excellent viscosity build, sag control and anti-settling properties in these coating systems.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

EBECRYL® 7100, crafted by CASE Ingredients, is a radiation-curable coating characterized by its bisphenol A-free composition and a low carbon footprint (PCF), ensuring it remains solvent-free and VOC-free. Tailored for the automotive and transportation paints and coatings, as well as the printing and packaging markets, this clear liquid finds its application in automotive OEM coatings, wood finishes, industrial coatings, and specialized printing inks like flexography and inkjet. Compatible with substrates such as paper, plastics, and wood, it can be applied using methods like curtain coating, dip coating, gravure coating, roller, and slot-die.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

StarFire® II Litho Bases are a unique combination of ultra-fine, high strength fluorescent pigment dispersed in a rheologically controlled vehicle system. This yields maximum color density and excellent printability.

Co-solvent soluble polyamide resin 100% Solids

Forchem TOR FOR90 is unmodified tall oil rosin (TOR) product with a higher content of abietic type rosin acids. FOR90 is an excellent base rosin to be upgraded for various end uses like printing ink binders and adhesive resins.

Kolon Industries HIKOTACK® P-120HS is pale yellow thermoplastic resin obtained from polymerizing unsaturated aromatic olefins and diolefins derived from the process of thermal cracking of naphtha. This grade has relatively higher softening point than HIKOTACK P-120, and is mainly used as vehicles for paint and ink products,water repellent agent, concrete curing agent and binder for asphalt. .

Flex-Rez™ 2433AD A is Lawter™ polyamide resin. Flex-Rez 2433AD A has served as the industry standard for surface printing applications on films or paper. Flex-Rez 2433AD A has excellent wet-pack resistance, coupled with excellent adhesion on difficult substrates such as polyethylene, polypropylene, and coated foils.

PureGRAPH™ 20 is characterized by their large platelet size, high aspect ratio and low defect levels. The powders are readily dispersed in a range of solvent and polymer media. Batch to batch consistency is ensured through leading edge quality control testing.

INDRA AGRO-TECH INDRA PES-PRINT 892/A is an anionic derivative of a Vegetable Polysaccharide. INDRA PES-PRINT-892/A is a cold water soluble derivative.

Exelfast Blue ED 909 EMR-O Blue 15:3 is a modified product. It is mainly Used in Printing Inks, Paste Inks (Sheetted, Heatset, Coldset, Silk Screen).

Activon ThermON changes from color to colorless reversibly when reaching to the color change temperature.

Ultrapoly™ 210 A is a high performance blend of tough, low COF polyethylene dispersed in a harddrying binder. Ultrapoly 210 A is recommended where abrasion, mar resistance, and slip are required. Ultrapoly 210 A is 100% non-volatile and fast-setting. It protects the film in the earliest stages of the printing process while developing exceptional toughness over time.

Activon EnergiON is the phase change material microcapsules which absorb and release heat depending on the temperature change reversibly.

INDRA AGRO-TECH INDRA PES-PRINT 520/A is an anionic derivative of a Vegetable Polysaccharide. INDRA PES-PRINT 520/A is a cold water soluble derivative.

Tergosol™ is a VOC compliant, low toxicity solvent that is an efficient, cost effective alternative to acetone and Methyl Ethyl Ketone (MEK). Designed especially for hard surface, precision cleaning and aerospace applications.

INDRA AGRO-TECH INDRA PES-PRINT 540/A is an anionic derivative of a Vegetable Polysaccharide. INDRA PES-PRINT 540/A is a cold water soluble derivative.

Ultrapoly™ 211 A is a PTFE modified version of Ultrapoly 210 A. Ultrapoly 211 A is a high performance blend of tough, low COF polyethylene/PTFE dispersed in a hard drying binder. Ultrapoly 211 A is recommended where a high degree of slip, heat resistance, and abrasion resistance are required. Ultrapoly 211 A is 100% non-volatile and fast-setting. It protects the film in the earliest stages of the printing process while developing exceptional toughness over time. Ultrapoly 211 A is coatable and may be used for laser work. For optimum heat resistance, we recommend using 3 parts Ultrapoly 211 A to 1 part Fluoron™ 735 A (a 50% PTFE concentrate). Recommended usage level is 3 to 5%.

Mangalam Organics Limited TERPENE PHENOLIC RESIN DRT-100 are thermoplastic polymers manufactured by copolymerization of terpene hydrocarbons and phenol.