Products in Packaging: Light Stabilizer

Dragonsorb® 3529 is a highly effective light stabilizer. It is suitable for PE films, PP films, and other plastics used as non-food consumer packaging.

Dragonsorb® 783 has good compatibility, processing thermal stability, oil resistance, water resistance, and extraction resistance. This product reflects the mechanisms of various light stabilizers and has the best synergistic and complementary effect. It can be used for food packaging and is mainly used for PE agricultural film, polyethylene, polypropylene, polyurethane, polyamide, and polyester elastomers. This product can also be used in ABS and engineering plastics.

Dragonsorb® 622 is a hindered amine light stabilizer that can be used in polyethylene, polypropylene, polyurethane, POM, polyamide, and polyester elastomers. It can also be used in ABS and engineering plastics. This product is approved for food packaging in some countries.

CONSTAB UV 01494 LD is a synergistic blend of hindered amine light stabilizers with a UV absorber, which falls within the hindered amine light stabilizer (HALS) chemical family. It's suitable for polyethylene (PE) and resin-based materials within the printing and packaging market, serving applications like food and beverage packaging and industrial and transport packaging.

CONSTAB UV 04630 LD is a product that consists of a synergistic blend of hindered amine light stabilizers (hals) at 20%, acting as a light stabilizer, synergist, and stabilizer. It targets the printing and packaging market and is suitable for food and beverage packaging, industrial packaging, and transport packaging.

CONSTAB UV 01370 LD offers a product enriched with 20% high-performance hals, tailored for thin films and demanding industrial UV-outdoor applications. This formulation is particularly designed for colored films that require low migration. Operating as a light stabilizer, it belongs to the chemical family of hindered amine light stabilizers (hals). The carrier consists of polyethylene (PE) with a resin-based structure, showcasing notable attributes such as high performance, outdoor durability, and low migration.

CONSTAB UV 09030 LL presents a specially formulated product aimed at the UV stabilization of HDPE and PP slit fibers. With functions such as light stabilization, UV protection, and general stabilization, it's suitable for high-density polyethylene (HDPE) and polypropylene (PP), serving the printing and packaging industries.

SperseStab™ 5153 is a mid-weight hindered amine light stabilizer with excellent permanence and compatibility with various filled systems, including carbon black, talc, CaCO3, Mg(OH)2, and others. This cost-effective product is ideal for roofing membranes, exterior packaging, and machine parts. The use of filled systems is becoming increasingly popular due to their structural, economic, and processing advantages. SperseStab™ 5153 can be used alone or in combination with other additives, including antioxidants, hindered amine light stabilizers, and UV absorbers. Other potential applications include filled nylon systems with SperseStab™ 5153 alone or in conjunction with other antioxidants.

MOCOM Compounds ALCOLOR® Function PC LS FC WT5069-16 is a white, similar to RAL 9003, polycarbonate colorant that is used in the food processing industry, household goods, domestic appliances, packaging, automotive, machinery, electrical and electronic, furniture, building and construction, and sport and leisure. It has a dosage of 5.0% extrusion and 5.0% injection molding, depending on wall thickness and required color intensity, and depends on application and operational area. It has a light fastness colorant of blue woolscale 8, a base polymer of polycarbonate, a filler/additive system of laser sensitive additive, and is laser etchable (dark etching), food contact, high additive content, free from cadmium, lead and diarylide pigments, and has high dispersibility and is dust-free.

OMNISTAB® LS 292 is a multi-purpose liquid basic HALS for coatings, printing and packaging, adhesives and sealants.

PUREsorb 622 is a polymerized hindered amine light stabilizer with high molecular weight, low volatility and low degradation, hardly extractable by water. PUREsorb 622 is effective as antioxidant and contributes significantly to the long-term heat stability of polyolefins and tackifier resins.

PUREsorb 783 is a synergistic blend of PUREsorb 622 and PUREsorb 944. It is a versatile light stabilizer with good extraction resistance, low gas fading and low pigment interaction. PUREsorb 783 is well suited for LDPE, LLDPE, HDPE films, tapes and thick sections and for PP films. PUREsorb 783 is also the product of choice for thick sections where indirect food contact approval is required.

Used in polyolefin industry.

GrapheneBlack™ 3X is NanoXplore's slightly larger pristine few-layer-graphene designed for multi-functional performance improvements in a wide range of markets and technologies. GrapheneBlack can be used in thermoplastics, thermosets, concrete, coatings, lubricants, and rubbers and enables manufacturers to cost-effectively improve long term product performance.

RIASORB® UV-2020 is a high molecular weight hindered amine light stabilizer (HALS). It shows excellent compatibility in the polymer and high extraction resistance.

ST-LST0850 is a light stabilizer masterbatch with high loading of active substance based on hindered amine light stabilizer (HALS) chemistry. ST-LST0850 is available in pellet form, for general purpose use in automotive applications. The additive induces extremely low levels of unwanted VOCs. It is produced by a reactive process which differs from traditional reactive extrusion. The 0850 additive has increased compatibilization properties over our similar ST-LST5350 light stabilizing additive.

GrapheneBlack™ 0X is NanoXplore's slightly smaller pristine few-layer-graphene designed for multi-functional performance improvements in a wide range of markets and technologies. GrapheneBlack can be used in thermoplastics, thermosets, concrete, coatings, lubricants, and rubbers and enables manufacturers to cost-effectively improve long term product performance.

PUREsorb 944 is a high molecular weight hindered amine light stabilizer (HALS). It shows excellent compatibility, high resistance to extraction and low volatility.

PUREsorb 770 is a low molecular weight hindered amine light stabilizer (HALS). It is a highly effective radical scavenger that protects organic polymers against degradation caused by exposure to ultraviolet radiation.

ST-LST5350 is a light stabilizer masterbatch with high loading of active substance based on hindered amine light stabilizer (HALS) chemistry. ST-LST5350 is available in pellet form, for general purpose use in automotive applications. The additive induces extremely low levels of unwanted VOCs. It is produced by a reactive process which differs from traditional reactive extrusion.

PUREsorb 531 is an ultraviolet light absorber (UVA) of the benzophenone class, imparting good light stability when used in combination with a hindered amine light.

MicroMB UVA15B is a UV Stabilizer with PE Resin.

It is recommended for various applications which require high light stabilization of polymers.

Makrostab® UV 2002 are stabilizer masterbatches used for increasing the UV stability of polymer. Their application is recommended in all cases where the basic stabilization from the resin producer is insufficient for a given application. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

Everstab LS-119 is particularly effective in polypropylene, polyethylene.

Wells Plastics UV Stabilizers & Absorbers allows parts for prolonged outdoor use, and in different climates with differing levels of UV light exposure, to be designed with a high level of confidence that they adequately fulfill their service life and performance requirements.

The Hanson Group UV-944 is a low-dust, polymeric hindered amine light stabilizer (HALS) who provides superb light stability to many polymers and, in addition, gives long-term heat stability to polymers by radical trapping mechanism similar to that of hinder phenol. HXA UV-944’s effectiveness combined with its low volatility and low extractability makes itself the most widely used HALS commercially available.

Everstab LS-119 is particularly effective in polypropylene, polyethylene, -olefin copolymers and blends with EPR, ERR, PE, EVA, EAA, EVOH and filled PP.

The Hanson Group UV-622 is a low-dust, polymeric hindered amine light stabilizer who provides outstanding light stability to many polymers and, in addition, gives long-term heat stability to polymers by radical trapping mechanism similar to that of hinder phenol. UV-622 produces virtually no effect on initial substrate color.

Ferrostab® PP UV 66-40 Is MB UV stabilizer at 40% on PP for fibers, extrusion and molding, UV STABILIZER MASTERBATCH ALTA CONCENTRAZIONE.

Baoding Lucky Chemical Light Stabilizer Lksorb C8481 is nainly used in the field of PE PP film and tape.

AddKan UV Stabilizer Masterbatches are exposure to sunlight and some artificial lights can have adverse effects on the useful life of plastic products. UV radiation can break down the chemical bonds in a polymer. This process is called photodegradation. It ultimately causes cracking, chalking, color changes and the loss of physical properties. To counteract the damaging effect of UV light, UV stabilizers are used to solve the degradation problems associated with exposure to sunlight.

MicroMB UV 320H is a UV Stabilizer with PE Resin.

Polyfill Technologies UV Masterbatch PT-UV20 is an LL based masterbatch giving very good protection to PP & LLDPE. PT-UV20 is especially recommended for the applications with thin products such as films and tapes. The active ingredient consists of a combination of different HALS (Hindered Amine Light Stabilizer) additives, which gives the most effective light stabilization effect already at low dosages.

Baoding Lucky Chemical Light Stabilizer UV-829 is used in the field of PE/PP film, tape, injection & rotational molding, PP fiber, POM, PA, PET, PBT, ASA, ABS, HIPS, Rigid & flexible PVC, PMMA and PUR.

Maskom masterbatch & Compound Technologies M 85028 shows the refraction effect of sunlights within the polymer chain. It prolongs the useful life of plastic parts of film.