Products in Packaging: Silicones

SILFAR® SE 4 is a silicone antifoam emulsion that finds its use in the food and pharmaceutical sectors, as well as in fermentation processes and agrochemical formulations. It serves as an effective antifoam agent in various stages, including fermentation and downstream processes like active ingredient extraction and solvent recovery, where compliance with USP and EP standards is necessary.

SILFAR® S 184 is a 100% silicone antifoam agent specially designed for the pharmaceutical and food processing industries. It fully adheres to the specifications outlined in the "Simeticone (EP)" and "Simethicone (USP)" monographs. Produced under cGMP guidelines, SILFAR® S 184 is suitable for use as an active pharmaceutical ingredient (API), particularly in antiflatulence and antacid preparations.

SILFOAM® SE 2660 SIMETH.EM is a medium- to high-viscosity antifoam emulsion that finds application in various industries. This silicone fluid emulsion, based on E 900, is exclusively permitted for use as a processing aid in food applications. It is crucial for food producers to ensure that only technically unavoidable traces of SILFOAM® SE 2660 SIMETH.EM are present in the final food product.

SILFAR® SE 88 is a silicone antifoam emulsion suitable for various industries such as food, pharmaceuticals, fermentation processes, and agrochemical formulations. It is specifically designed for European use as a processing aid in food production, based on E 900. It is important for the food manufacturer to ensure that only minimal traces of the product are present in the final food, as per the necessary regulations.

SILFAR® E 1049 is a silicone fluid emulsion specifically formulated for a wide range of applications, including those in the food and pharmaceutical industries. It is composed of components that meet the necessary standards outlined in the relevant EP and USP monographs. SILFAR® E 1049 can be utilized as an excipient in pharmaceutical products, although it cannot be used as an active pharmaceutical ingredient.

SILFAR® S 188 is a 100% silicone antifoam agent that has been specifically formulated for use in the pharmaceutical and food processing industries. It functions by acting as an antifoam agent, effectively preventing or alleviating flatulence in the digestive system. Additionally, it forms a protective lining on various surfaces, such as the gastric mucous membrane, providing additional benefits.

SILFOAM® SE 33 is a medium viscosity silicone defoamer emulsion with a 20% active ingredient content. It is specifically formulated to control foam in aqueous systems. SILFOAM® SE 33 is suitable for use in alkaline and high-temperature applications. This product offers excellent foam knockdown properties and provides longer-lasting prevention of foam reoccurrence compared to many conventional defoamers.

ELASTOSIL® Film 2030 is a high-precision silicone film made from cross-linked silicone rubber. The film shows a maximum thickness variation across the total width of less than ±5%. The precision allows for constant electrical resistance and good comparative tracking resistance across a broad range of temperatures.

ELASTOSIL® Film 2030 Sheet 250/50 is a high-precision silicone film made from cross-linked silicone rubber. The film shows a maximum thickness variation across the total width of less than ±5%. The precision allows for constant electrical resistance and good comparative tracking resistance across a broad range of temperatures.

CONSTAB SAB 06532 PPR is a multi-functional product with anti-blocking agent and slip agent functions. It uses polypropylene (PP) as its carrier and features a low coefficient of friction. The product contains synthetic silica and silicone oil in terpolymer and is used in the printing and packaging market for food and beverage packaging applications.

CONSTAB SAB 06522 PPR is a multi-functional product with anti-blocking agent and slip agent functions. It is used in extrusion processes with polypropylene (PP) as its carrier. It features low haze and a low coefficient of friction. The product contains synthetic silica and silicone oil in terpolymer.

EverGlide® MB1840 is a Polyoxymethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB2450 is a Thermoplastic polyurethane polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1550 is a Polyethylene terephthalate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB250H is a High-density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB150H is a Polypropylene homopolymer polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1350 is a Polycarbonates polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB350 is a Linear Low Density Polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1450 is a polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB450 is a low density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1950 is a Polyamide 6 polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB950 is a High Impact Polystyrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Low Temperature Silicone is a phenyl base compound to be used in products that will operate at temperatures below -55ºC. The compound can be used for molding and extrusion, offering very good resistance to temperatures as low as -100º. Colors will match your requirement.

EverGlide® MB3950 is a Ethylene-vinyl acetate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB150 is a Polypropylene Homopolymer (PPH) which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1150 is a acrylonitrile-butadlene-styrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB3450 is a Styrene Acrylonitrile polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

C.B.Frost & Co. CBF30 is an inert material and does not react with most chemicals. It operates well under high temperatures of between 60˚C and +230˚C and has excellent resistance to ozone and UV. Due to the inertness of the material, it is ideally suited to several medical applications, and its weathering qualities mean that it is commonly used for a number of industrial purposes. General purpose silicone delivers high performance and a long-life span in extreme high and low temperatures.

Precision Associates inc. 19426 is a 40 durometer gray colored Silicone elastomer, formulated with FDA sanctioned materials. It exhibits good resistance to heat and compression set and will remain non brittle at low temperatures.

C.B.Frost & Co. CBF70 is an inert material and does not react with most chemicals. It operates well under high temperatures of between 60˚C and +230˚C and has excellent resistance to ozone and UV. Due to the inertness of the material, it is ideally suited to several medical applications, and its weathering qualities mean that it is commonly used for a number of industrial purposes. General purpose silicone delivers high performance and a long-life span in extreme high and low temperatures.

CM-E02 silicone processing aid and mold release masterbatches are comprised of polydimethylsilicone* fluid dispersed in polyethylene, polypropylene, nylon, high impact polystyrene resin, acetal copolymers and others.

Colmant Coated Fabrics Silicone Sheet are ideal for high and low temperature applications. Electrical properties are excellent and resistance to weathering and ozone attack is outstanding. It is not resistant to super-heated steam. Physical properties are generally low but are at least retained at higher temperatures. Gas permeability is very poor as is resistance to petroleum based fluids. Silicone rubbers are expensive in comparison to most other rubbers. Food Quality/FDA compliant grades are available for use in the food and pharmaceutical industries.

C.B.Frost & Co. CBF40 is an inert material and does not react with most chemicals. It operates well under high temperatures of between 60˚C and +230˚C and has excellent resistance to ozone and UV. Due to the inertness of the material, it is ideally suited to several medical applications, and its weathering qualities mean that it is commonly used for a number of industrial purposes. General purpose silicone delivers high performance and a long-life span in extreme high and low temperature.

CM-P03 silicone processing aid and mold release masterbatches are comprised of polydimethylsilicone* fluid dispersed in polyethylene, polypropylene, nylon, high impact polystyrene resin, acetal copolymers and others.

Starbetter Chemical Materials Siloxane Masterbatch Base on PP ST-LS302 is made from high molecular weight polysiloxane uniformly dispersed in polypropylene resin. It can be blended evenly with other materials in production, easier processing. It is used as processing aids and surface modifier for thermoplastics, to improve the flowability in processing and surface properties of products, reduce coefficient of friction, and improve the scratch resistant.

Chengdu Silike Technology SF 102 is specially developed for Plastic film products . Using specially modified silicone polymer as the active ingredient, it overcomes the key defects of general slip agents, including the continuous precipitation of the smooth agent from the surface of the film, the smooth performance decreasing with time-going by and the rise of temperature with unpleasant odors etc. SF Masterbatch is suitable for TPU, EVA blow, casting film. The processing performance is the same as the substrate, no need to change the processing conditions. It is widely used in the production of TPU, EVA blowing film, casting film and extrusion coating.