Products in Packaging Coatings: Nitrocellulose

VINNOL® H 40/43 is a copolymer composed of approximately 66 wt.% vinyl chloride (VC) and approximately 34 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film once the solvent in the formulation has evaporated.

VINNOL® H 40/55 is a copolymer comprising approximately 62 wt.% vinyl chloride (VC) and approximately 38 wt.% vinyl acetate (VAc). Its primary application lies in serving as a binder for surface coating compounds and printing inks. Functioning as a thermoplastic, physically drying binder, VINNOL® H 40/55 undergoes film formation once the solvent present in the formulation has evaporated.

VINNOL® H 40/60 is a copolymer composed of approximately 61 wt.% vinyl chloride (VC) and approximately 39 wt.% vinyl acetate (VAc). Primarily, it serves as a binder for surface coating compounds and printing inks. As a thermoplastic binder, VINNOL® H 40/60 undergoes physical drying, resulting in the formation of a film as the solvent in the formulation evaporates.

VINNOL® H 40/50 is a copolymer composed of approximately 63 wt.% vinyl chloride (VC) and approximately 37 wt.% vinyl acetate (VAc). Its primary application is as a binder for surface coating compounds and printing inks. This thermoplastic binder undergoes physical drying, resulting in the formation of a film as the solvent within the formulation evaporates.

Pangel B42 is an organically modified sepiolite powdered additive with a high thickening and anti-settling capacity for high polarity systems, particularly recommended for systems based on alcohol, glycol and ketone type solvents, as well as in mixtures of those with water.

AFCONA 5244 is the nearly 100% active solid version of AFCONA 5044, designed for high-solid systems where the presence of solvents must be limited. When used at the same level of active solids, the properties of AFCONA 5244 and AFCONA 5044 are almost identical.

AFCONA 5209 is an anionic/cationic wetting and dispersing additive used to improve the wetting of pigment surfaces. AFCONA 5209 is the 100% version of AFCONA 5009. It reduces the interfacial tension between pigments or extenders and the vehicle. It stabilizes the pigments through electrical charge repulsion forces.

Pangel B40 is a powdered additive with a high thickening and anti-settling capacity for high-polarity systems. It is especially recommended for adding thixotropic, suspension, and sagging resistance properties to systems based on alcohol, glycol, and ketone solvents, as well as mixtures of those solvents with water.

SYNTHALAT TH 30 HS is a short-oil alkyd resin modified with phenolic resin. Air-drying and oven-drying primer coatings for industrial applications such as machinery and steel construction. The relatively low viscosity allows the preparation of primers and topcoat varnishes with significantly higher non-volatile content and good drying properties, also in thicker coating layers. It has applications in marine transportation, industrial maintenance, marine coatings, and wood flooring.

AFCONA 5008 is an anionic/cationic wetting and dispersing additive that improves the wetting of pigment surfaces and organically treated bentonites. It reduces the interfacial tension between pigments or extenders and the vehicle, and also stabilizes the pigments through charge repulsion forces.

AFCONA 5054 is a wetting and dispersing additive to prevent sedimentation and flooding of pigments. It helps to reduce interfacial tension between hydrophilic pigments/extenders and the binder, forming a lattice structure with the pigments at the same time. It stabilizes pigment through electrical charge repulsion forces.

AFCONA 2040 is a moderate defoamer with minimal side effects that prevents the formation of foam and blisters during manufacturing and application. It offers a combination of good defoaming and compatibility with most resin systems. It is recommended for medium-viscosity applications applied by spray and brush, and is particularly suitable for systems ranging from low polarity to high polarity. AFCONA 2035 is recommended for brush and conventional spray applications.

AFCONA 3758 is a leveling and flow control agent for solvent-based coatings with anti-crater properties. AFCONA 3758 is a special modified polyacrylic polymer. It reduces drastically surface tension of organic coating systems. This, together with good compatibility in most solvent-based systems and with minimal foam stabilizing effect, makes it very effective as an anti-crater and flow control agent for all solvent-based coatings.

AFCONA 2018 is a silicone-free defoamer that is recommended for systems where in-can transparency is important. It prevents the entrapment of air during processing steps such as stirring or pumping, and functions well during the application of paints and lacquers. AFCONA 2018 is well-suited for solvent-based wood finishes where foaming is a problem when applied by spraying.

AFCONA 2020 is a very strong defoamer suitable for most solvent-based coatings, printing inks, and thermosetting resin systems. It eliminates foam and blistering, regardless of the source of the air bubbles. However, it is not suitable for transparent, high-gloss clear topcoats.

AFCONA 2038 is a highly compatible defoamer that does not cause in-can haziness. It prevents the formation of foam and blisters during the manufacturing and application of solvent-based wood finishes. This defoamer has excellent compatibility properties, making it especially suitable for use in clear coatings and high gloss coatings. Additionally, it is suitable for use in applications where dry film transparency is essential, such as when applying thick clear coatings by conventional spraying.

AFCONA 3038 was designed as an anti-blushing agent for thermoplastic systems, an anti-popping agent for all heat-cured paints, and a flow agent for solvent-based paints. It has a better resin solubility, which promotes better flow. This compensates for its lack of silicone. AFCONA 3038 is suitable for systems where silicone is not allowed or which use high curing temperatures, such as coil and can coatings.

AFCONA 5009 is an anionic/cationic wetting and dispersing additive that improves the wetting of pigment surfaces, reducing the interfacial tension between pigments or extenders and the vehicle. It is an economy grade of additive and stabilizes the pigments through electrical charge repulsion forces.

AFCONA 4017 is a polymeric dispersant mainly used for co-grinding. AFCONA 4017 is a polymeric dispersant mainly developed for co-grinding purposes for coil and can coating, heat cured polyester and acrylic, and epoxy, as well as polyurethane. This product does not depend on polarity and performs well in almost all resin systems, especially when co-grinding dark colors.

AFCONA 2050 is a strong defoamer for most solvent-based coatings. AFCONA 2050 offers very strong defoaming and anti-foam performance with good compatibility in many resin systems. It is suitable for solvent-based coatings, printing inks and thermosetting resin systems. The product eliminates foam and blistering, regardless of whether the air bubbles are caused by the substrate.

AFCONA 2045 is a silicone-based defoamer used to prevent the formation of foam and blisters during manufacturing and application of solvent-based coatings, including polyurethane clear coats. It is effective even in difficult situations such as airless spray, brush, and roller application, and has strong defoaming properties with a very good transparent appearance.

AFCONA 5044 is an anionic/cationic wetting and dispersing additive to improve the wetting of pigment surfaces and organically treated bentonites. AFCONA 5044 is an additive for pigment dispersion. It reduces the interfacial tension between the vehicle and pigments or extenders. It stabilizes the pigments through electrical charge repulsion forces.

AFCONA 2290 provides anti-foam and de-aeration properties for solvent-containing and solvent-free systems of epoxy, polyurethane, UPE and UV coatings. AFCONA 2290 contains a non-silicone defoaming substance which offers very good performance in both defoaming and anti-foaming. Due to its strong defoaming properties and silicone-free composition, it is also very suitable for primer coatings.

AFCONA 2048 is a defoamer for both spray and brush applications of solvent-based wood coatings. It is especially suited for high gloss solvent-based wood finishes and is highly compatible, not causing unacceptable haze. It is particularly useful for brush applications, as it quickly evaporates and provides rapid defoaming.

Afcona - 5251 is a non-ionic dispersant formulated for the deflocculation of transparent iron oxides.

Afcona - 2050 is a strong defoamer suitable for most solvent-based coatings.

Afcona - 4201 is a high molecular weight polymeric dispersant used for the deflocculation of all types of pigments.

Afcona - 4063 is a high molecular weight polymeric dispersant aimed at deflocculating all types of pigments.

Afcona - 4720 is a 100% active, solvent-free dispersing agent based on an AB blocked polymer and a group of anchoring agents. Its advanced 3-block high molecular weight structure allows the development of pigment dispersions that exhibit better compatibility in broad applications.

RheoFal™ 102 is an easy dispersing organically modified bentonite clay. It is especially suited for medium to high polarity solvent-based paints and coatings. It provides excellent viscosity build, sag control and anti-settling properties in these coating systems.

Meghapon® dyes are solvent soluble metal complex dyes, with excellent solubilities in polar organic solvents like alcohols, ketones and glycol ethers, as well as good overall fastness properties. They are suitable for coloration of writing inks, wood stains, leather finish, flexographic and gravure inks and paints based on polar solvents.

Meghapon® dyes are solvent soluble metal complex dyes, with excellent solubilities in polar organic solvents like alcohols, ketones and glycol ethers, as well as good overall fastness properties. They are suitable for coloration of writing inks, wood stains, leather finish, flexographic and gravure inks and paints based on polar solvents.

Meghapon® dyes are solvent soluble metal complex dyes, with excellent solubilities in polar organic solvents like alcohols, ketones and glycol ethers, as well as good overall fastness properties. They are suitable for coloration of writing inks, wood stains, leather finish, flexographic and gravure inks and paints based on polar solvents.

Meghapon® dyes are solvent soluble metal complex dyes, with excellent solubilities in polar organic solvents like alcohols, ketones and glycol ethers, as well as good overall fastness properties. They are suitable for coloration of writing inks, wood stains, leather finish, flexographic and gravure inks and paints based on polar solvents. Meghapon® Dark Violet R is a custom dye developed by us with a brilliant violet shade.

POLYCHEM® G801-238-X-66 is a glyptal short oil non-drying alkyd. It has excellent compatibility and adequate hardness. It also has very high color retention and good flexibility. It is specifically designed for baking enamels and serves as an effective plasticizer for nitrocellulose lacquers.

Medium molecular weight acrylic based flow and levelling agent