Products in Paints & Coatings: Epoxy & Epoxy Derivatives

Springfield Industries SP-EA0060 is a difunctional epoxy flexibilizer based onpolysulfide chemistry. It can be combined with anepoxy or used by itself with a curing agent to impart ahigh degree of flexibility to an epoxy formulation. Itproduces a transparent coating when used within theappropriate formulation.

x-bond® E 9013 is a epoxy modified silicon oxide. It is a waterborne, inorganic-organic translucent binder. Can be cured at low temperatures. Formulations based on this binder enhance abrasion resistance and protect from corrosion. Due to the pH neutrality with aluminum and zinc pigments, low gassing waterborne corrosion protection coatings for steel can be formulated. Suitable to formulate spraying, dipping and brushing paints as well as coatings for coil applications.

Triune Chemicals and Materials BE450A80 is bromine epoxy resins which is available as clear liquid.

Synpol 280 Epoxy Resin is a very high viscosity epoxy resin based on Bisphenol A & Epichlorohydrine.

CHS-EPOXY 474 is a Low viscosity epoxy system. Low viscosity epoxy system, for use at lower tepmperature. Standard epoxy system, low temperature, wet conditions, very fast hardening. Standard epoxy system, wet conditions. Epoxy resin modified with mono-functional reactive.

CHEM-KOTE 3 is a two component, 100% solids, epoxy system for use in contact with potable water. This product meets ASTM C-881.

Duresco NU 461 R is a Epoxy molding compound with excellent thermal shock and chemical resistance for high temperature applications.

ConoCrete General Purpose 101 is a chemically-resistant, 100% solids, aggregate-filled, general purpose epoxy floor system. It is ideal for resurfacing old and protecting new concrete floors from chemical and physical abuse. The physical properties of this material far exceed those of concrete, providing a more durable surface with greater chemical resistance.

Heresite P-413 is a thin film, high performance coating used principally for coil and radiator heat exchangers as well as other air and fume handling equipment fabricated of light gage metals. It is the first HVAC-R coil and radiator coating to meet the ISO 12944-9 (formerly ISO 20340) Standard for severe offshore marine environments. The corrosion resistance of Heresite P-413 coatings significantly extends the service life of HVAC-R (heating, ventilation, air conditioning, and refrigeration), and other heat transfer equipment. In addition to marine and salt air environments, the P-413 family of coatings will withstand exposure to an extensive variety of high and low pH corrosive and chemical fumes and condensate. Because these products are efficient thermal conductors, applied at very thin films, HVAC-R and process equipment coil OEMs have indicated that thermal loss due to the presence of P-413 baked phenolic epoxy coating is <1%.

SE 1702 is a bisphenol A epoxy acrylate oligomer which has been modified with fatty acid. This product is characterized by its flow and leveling, and its outstanding pigment wetting qualities.

Epoxy-450 is a bisphenol Epoxy Resin.

PHOTOMER® 3052 is a high viscosity, non-volatile, difunctional acrylate ester derived from a modified epoxy acrylate blend. The product exhibits fast cure speed, low odor and low skin irritancy. It is an excellent film former and contributes to unique performance properties typical of epoxy resins in UV/EB curable formulations.

Razeen® SL 2733W67 is a low viscosity emulsion of an epoxy resin based on Bisphenol A/F supplied at 67% solids content.

Razeen® SR 5097 is a solid, unmodified epoxy resin based on Bisphenol A.

CHS-EPOXY 573 Is a Bisphenol A/F epoxy resin

Razeen® LR 1110 is an unmodified liquid epoxy resin similar to Razeen® LR 1100 but with lower viscosity and higher purity.

CHS-EPOXY 112 is a Medium molecular weight "4 - type" epoxy resin.

Blome International Primer 75 with Conductive Powder is a two-component, moisture-tolerant epoxy primer for steel, concrete and other substrates as specified. It is used to prime concrete, steel and other substrates prior to application of other Blome International coatings, linings, membranes, sealants and polymer concretes. It achieves a tenacious bond to the substrate and tolerates substrate dampness but not wet surfaces.

NSP 100 Epoxy/Concrete Sealer is a deep penetrating primer used to promote the adhesion of various NSP topcoats to dry or damp concrete surfaces. Its extremely low viscosity allows for permeation into the concrete with easy application by roller or spray.

SurePoxy HiBild is a two component, self priming, 100% solids, flexibilized epoxy coating, utilizing the inherent advantages of tough epoxy resins, cross-linked with aliphatic adducted hardeners. When combined, they form an integrally hardened protective coating, resistant to mild abrasion and chemicals. The special hardeners provide excellent adhesion to either dry or damp surfaces and make the coating completely insensitive to moisture after cure. HiBild is unique in that it does not blush or form other surface imperfections during cure. Only the highest quality, inert, alkali and light resistant pigments are used. If desired SurePoxy Mortar Aggregate may be integrally added for increased yield or broadcast on the surface for non-slip purposes.

Products Techniques PT-500E Epoxy Primer is a low VOC epoxy polyamide solvent primer which conforms to MIL-P-23377 Rev. E. This coating is highly recommended for use on aluminum and plated plated or un-plated metallic surface to insure maximum protection against corrosion. PTI Epoxy Primer also insures maximum adhesion of PTI TUF/FILM coating, or any other paint or lacquer finish coats. This Primer is intended to be used for aircraft, marine, original equipment manufacturing and/or industrial applications.

Paladin Paints & Chemicals PEPOX 2800X65 comprised of our technologically designed one pack epoxy resins, provides customers with unique and novel cardanol based coating systems that exhibit superior corrosion resistance.

Two-component epoxy topcoat EP S 2321 is designed for top coatings of metals, concrete, masonry and plastics. Completely hardened, it is extremely resistant to chemicals, oils and moisture as well. In combination with other epoxy paints - primer and intercoat - provides the best corrosion protection. The paint Rokoemail EP S 2321 is certified for indirect contact with food. Weather induced chalking.

AROFLINT® 608 is an oxirane-modified ester supplied without solvent. It is used in combination with AROFLINT® 252 Z1-60, AROFLINT® 404-XX-60, AROFLINT® 808-XD-71, or AROFLINT® 91-314 (high acid value polyesters) to formulate high performance, durable coatings.

Razeen® LR 2740 is low viscosity Bisphenol A/F based liquid epoxy resin, modified with mono-functional reactive diluent.

Epiform E-530 is a one component epoxy resin, used for coil impregnation and fixation. It is a premixed, easy to use product with low viscosity that cures fast at moderate temperatures and exhibits excellent adhesion strength at high temperatures. Epiform E-530 offers great heat resistance for long term reliability and excellent electrical resistance. It has a long term heat resistance (UL1446) rating of a Class H equivalent. Alternative liquids for impregnation are K-8346 and E-8982-2 while there are also powder solutions for relevant processes.

Araldite® GT 7014 N is a solid, unmodified epoxy resin based on Bisphenol A.

Kukdo Chemical KD-176X80 is high solid epoxy resin.

AltroColor EP 2000 Color Pastes are based on a bisphenol A/F resin and have been developed particularly for the coloring of epoxy resin systems. As our AltroColor EP 2000 Color Paste Series are based on a reactive/crosslinkable binder, a full integration into your epoxy resin system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties. AltroColor EP 2049 is green colored.

HP-330 Epoxy is a 2 component coating system. This product is odorless and non-flammable. Primer is not required and is slip resistant certified.

Products Techniques PT-428D Conventional Epoxy is a two component catalyst cure epoxy polyamide, which meets and exceeds MIL-C-22750D. This system cures to an extremely hard, impervious film which resists yellowing and chalking. PT-428D Tuf /Film provides the ultimate protection and appearance to metal, wood and most other materials capable of being coated. This is a non-conductive, dielectric coating.

AltroColor EP 2000 Color Pastes are based on a bisphenol A/F resin and have been developed particularly for the coloring of epoxy resin systems. As our AltroColor EP 2000 Color Paste Series are based on a reactive/crosslinkable binder, a full integration into your epoxy resin system is ensured. Therefore, the AltroColor Color Pastes have no or only a little influence on the Shore hardness (depending on the type of hardener/variant used) nor on the other mechanical and chemical properties. AltroColor EP 2045 is rose colored.

INTUMAX EP1115X HP is a unique two-component epoxy fire retardant – intumescent coating based on our proprietary non-halogenated phosphate technology. All of our phosphates are manufactured in house for our exclusive use. When exposed to heat and/or fire, INTUMAX EP1115X HP forms a robust, dense char insulation layer that protects a variety of substrates from the effects of heat and flame. The active ingredients in INTUMAX products are not water-soluble and will not leach out over time.

EpoxyGrip® 2000 VOC is used as an intermediate or topcoat over zinc rich primers for highly corrosive environments. Where exterior color fastness is required EpoxyGrip 2000 VOC may be top-coated with polyurethane finishes. Used on structural steel, steel tanks, offshore platforms, barges, refineries, petrochemical plants, power plants, railcars, pulp & paper mills, masonry surfaces and other areas as recommended. EpoxyGrip 2000 VOC may be used as a surface tolerant single coat system in mild duty applications.

EpoxyGrip® 2000 is used as an intermediate or topcoat over zinc rich primers for highly corrosive environments. Where exterior color fastness is required EpoxyGrip 2000 may be top-coated with polyurethane finishes. Used on structural steel, steel tanks, offshore platforms, barges, refineries, petrochemical plants, power plants, railcars, pulp & paper mills, masonry surfaces and other areas as recommended. EpoxyGrip 2000 may be used as a surface tolerant single coat system in mild duty applications.

Blome International Primer 75 is a two-component, moisture-tolerant epoxy primer for steel, concrete and other substrates as specified. It is used to prime concrete, steel and other substrates prior to application of other Blome International coatings, linings, membranes, sealants and polymer concretes. It achieves a tenacious bond to the substrate and tolerates substrate dampness but not wet surfaces.