Products in Oil, Gas & Mining: Polyolefins

Excelene 4990 are crosslinkable elastomeric polyolefin compounds designed for high temperature applications requiring a balance of mechanical properties, electrical properties, thermal stability, and performance.

SP Series™ SHP1200-1 is a ultra high molecular weight polyethylene (UHMWPE) polymer in powder form. These unique materials exhibit very high toughness. SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. SP Series™ powders are well suited for use in water, chemical and gas filter applications. SHP1200-1 can be independently sintered into a filter or used as a binder for activated carbon filter.

Pure very high molecular weight high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~75 micron. Molecular weight of approximately 500,000.

Pure ULTRA high molecular weight high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~70- micron. Molecular weight in excess of 2,000,000.

Pure ULTRA high molecular weight high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~130- micron. Molecular weight in excess of 2,000,000.

Tasnee HD 100 Orange is a High Density Polyethylene, orange colored resin. The product is classified as PE 100. Tasnee HD 100 Orange provides excellent environmental stress cracking resistance properties (ESCR) with very good long term hydrostatic strength and combines very high impact and stiffness properties.

PROlen 9000 GLB PE 1000 -UHMW- PE 1000 -UHMW- cross-linked with micro glass beads. Ideal for areas of application that are enriched with a high proportion of abrasive media, especially in so-called wet areas.

Inhance Fluoro-Seal UH-1500 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

SIMONA® PE 100 black 10024793 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

Seals Eastern Compound 7045 is 80-duro EPDM.

Jonam Composites Eco Strip is a solid strip with a strong thermoplastic composite core and a durable thick plastic coating.

Seals Eastern Compound 7240 is 52-duro EPDM.

Hypalon® CSM Chlorosulfunated Polyethylene Rubber is to develop rubber solutions that will optimize your components performance in your applications.

AtenPly GPE35 are thin sheets of continuous reinforcement fibers impregnated with thermoplastic resin. It is made direct from the fiber roving and thermoplastic melt using proprietary technology developed by Jonam Composites Ltd. This cost-effective efficient process produces light weight, high-strength ,well impregnated, smooth tape with unidirectional fiber reinforcement.

Moharamplast HDPE –MP5020-100 (Orange) is a thermally stabilized bimodal high molecular weight high density polyethylene, classified as PE100 – hexane copolymer. Long term stability is ensured by an optimized stabilization system. It is intended for use in PE-100 pipe applications,where the highest standard for long term hydrostatic strength and resistant for slow and rapid crack growth are desired. Recommended for pipe systems in the applications field of natural gas distribution pipes and drinking water pipes.

Inhance Fluoro-Seal UH-1080 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Duro-Bond ETFE is a laminated sheet lining consisting of a layer of Ethylenetetrafluoroethylene (ETFE) resin laminated to a fabric backing that is readily bonded to steel, concrete, or FRP substrates.

Precision Associates inc. 14540 is 50 durometer black Chlorosulfonated Polyethylene elastomer for general purpose.

Inhance Fluoro-Seal UH-1150 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

SIMONA® PE 100 black 10024775 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

Seals Eastern Compound 7075 is 68-duro EPDM.

SIMONA® PE 100 black 10024790 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

HY60 is a csm rubber sheet.

Seals Eastern Compound 7189 is 53-duro EPDM.

GAR-DUR® UHMW-PE plastic parts are made from ultra high molecular weight (UHMW) polymer having a molecular weight of 4.2 million and greater. Garland Manufacturing Company has been processing UHMW resin for over 45 years. This true UHMW polymer is excellent for resisting abrasion and corrosion while contributing a low coefficient of friction. Fabricated Gar-Dur® parts have helped companies improve performance, reduce downtime, eliminate the need for lubrication, replace steel parts and lower their operating costs.

PROlen 9000 HTR a PE 1000 -UHMW- with increased temperature resistance, but good wear values, even at a maximum of 110° C continuously.

Inhance Fluoro-Seal UH-1035 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

SIMONA® PE 100 black 10024796 Line range of pipes and fittings with FM certification offers a superior standard of safety and quality for use in subterranean fire extinguishing systems. What is more, SIMONA® is the first plastics manufacturer worldwide to supply "FM APPROVED" pipes and fittings in sizes up to d 630 mm. It has High heat stability, UV-stabilized, creep strength at 50 years, 20°C, medium water = 10 Mpa.

Moharamplast HDPE- MP6050- 80 (Black) is a black, bimodal, hexene high density polyethylene classified as PE80 material (MRS 8.0), with an optimum balance between flexibility and strength, with excellent carbon black dispersion which gives UV resistance.Produced with advanced gas phase PE process. Long –term stability is ensured by an optimized stabilization system. HDPE-MP5535-80 is recommended for pressure pipe systems in the applications field of drinking water, natural gas, pressure sewerage, relining, sea outfall and industrial, where flexibility and coil ability is of importance. It also shows excellent resistance to rapid crack propagation and slow crack growth, and the structure gives outstanding extrudability. The combination between high mechanical properties, excellent long term performance and sagging performance makes it the ideal pressure pipe material.

Seals Eastern Compound 7204 is 87-duro EPM.

Inhance Fluoro-Seal UH-1045 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Moharamplast HDPE MP6020-100 (BLACK) is a bimodel molecular structure compound classified as PE100. It is a black high density polyethylene compound.It has high tensile strength and excellent resistance against fast and slow crack propagation. It also shows very high impact resistance throughout its entire temperature range combined with an acute resistance to fracture.

Jonam Composites Eco-Rods are solid rods with a strong thermoplastic composite core and a durable thick plastic coating.

Inhance Fluoro-Seal UH-1750 are a range of Ultra High Molecular Weight Polyethylene (UHMWPE) particles that are surface activated, making them highly compatible and dispersible in formulated systems. Posessing surface energies up to 60 dynes/cm, these particles are easily dispersible in CASE (coatings, adhesives, sealants and elastomers) formulations, imparting abrasion resistance, wear resistance, reducing coefficient of friction and increasing mechanical strength.

Nylacast Polyethylene is well known in the polymer family and is often referred to as PE. It has an extremely low coefficient of friction, good chemical and corrosion resistance with excellent impact strength making it an extremely adaptive thermoplastic. Polyethylene is available in various grades, offering different properties.

Bell Plastics Ultra XLPE Film is a new and innovative film that offers many of the advantages of UHMWPE films as well as the added benefit of being able to produce much wider sheets, all at a significant cost savings. Bell Plastics Ultra XLPE Film has excellent abrasion and chemical resistance and is ideal for applications such as hose covers and abrasion resistant industrial products.