Products in Industrial: Abrasion Resistant

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 185 (310999242) is a PTFE product filled with a combination of polyphenylene sulfide and graphite. It is designed for use in large billet molding and is supplied in dry powder form. The addition of polyphenylene sulfide and graphite improves the wear properties, abrasion resistance, and deformation resistance of PTFE without compromising its chemical and thermal resistance. This product is suitable for use in large-scale manufacturing processes and can be molded into thick-walled parts using compression molding equipment.

AGC Chemicals Americas, Inc. Fluon+™ FC 10 PI (310999105) is a polyimide-filled, modified-PTFE product designed for use in seal applications. It is supplied in dry powder form and improves wear properties and abrasion resistance of PTFE in non-lubricated applications without sacrificing chemical and thermal resistance. As a result, it reduces wear on the mating surface.

AGC Chemicals Americas, Inc. Fluon+™ FC 7 PI FF (340461400) is a polyimide-filled PTFE product designed for use in seal applications. It is supplied in round pelletized form, with pellets ranging in size from approximately 350 to 800 microns. Polyimide is added to PTFE to improve its wear properties and abrasion resistance in non-lubricated applications, while maintaining the chemical and thermal resistance of the polymer. This compound results in less wear on the mating surface.

AGC Chemicals Americas, Inc. Fluon+™ FC 15 MIN (310154464) is a 15% wollastonite-filled PTFE product. This compound is supplied in dry powder form. Wollastonite fibers are added to PTFE to improve its wear properties, abrasion resistance, compressive strength, and creep resistance without sacrificing the chemical and thermal resistance of the polymer. Additionally, wollastonite is an FDA compliant filler.

AGC Chemicals Americas, Inc. Fluon+™ FC 15 PI (310999107) is a 15% polyimide-filled PTFE product supplied in dry powder form. Polyimide is added to PTFE to improve its wear properties and abrasion resistance in non-lubricated applications, without sacrificing the chemical and thermal resistance of the polymer. This compound results in less wear on the mating surface.

AGC Chemicals Americas, Inc. Fluon+™ Polycomp 458 (340999102) is a polyphenylene sulfide-filled PTFE product designed for use in seal applications. This compound is supplied in round, pelletized form, with pellets ranging in size from approximately 350-800 microns. Polyphenylene sulfide is added to improve the wear properties, abrasion resistance, and deformation resistance of PTFE without sacrificing the chemical and thermal resistance of the polymer.

AGC Chemicals Americas, Inc. Fluon+™ FC 15 PI FF (340463400) is a 15% polyimide-filled PTFE product designed for use in seal applications. This compound is supplied in round pelletized form, with pellets ranging in size from approximately 350-800 microns. The addition of polyimide improves the wear properties and abrasion resistance of PTFE in non-lubricated applications, without sacrificing the chemical and thermal resistance of the polymer. This results in less wear on the mating surface.

AGC Chemicals Americas, Inc. Fluon® ETFE TL-584 is a melt-processable copolymer of tetrafluoroethylene and ethylene that boasts a unique combination of desirable properties, including higher resistance to heat and chemical attack, as well as outstanding physical toughness. Rotational molding and lining grades of Fluon® ETFE TL-584 are designed to be free-flowing powders with the necessary particle morphologies to uniformly coat even the most challenging and complex parts.

AGC Chemicals Americas, Inc. Fluon® ETFE TL-581 is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and high fluidity. Various powder grades are available for different processing methods and application needs.

AGC Chemicals Americas, Inc. Fluon® ETFE TL-081 is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and high fluidity. Various powder grades are available for different processing methods and application needs.

PropylMatte 31 is Finely micronized densified polypropylene for consistent matting and gloss control with superior in- can stability in water-based paints, coatings and inks.Features and Benefits Efficient gloss reduction from satin to matte finish Improves burnish resistance vs. silica mattifiers Particle density optimized to essentially eliminate flotation or settling in most water based systems Imparts non-slip properties For more efficient matting with a fine microtexture, try PropylTex 325HD/270HD

17 oz. aramid and "soft glass" fibers are combined to make a fabric that is stronger than pure aramid and less abrasive than glass fabrics. This material is impregnated with a high temperature phenolic resin matrix, which produces a composite with excellent mechanical strength at elevated temperatures and adverse environments. Applications include wear plates for conveyor systems, valve plates, and compressor and pump vanes. Variations of this material may be developed for specific applications.

Synthetic cis-butadiene rubber SIBUR BR-1245 is a product of polymerization of butadiene in solution in the presence of neodymium catalyst; 1,4-cis — at least 97%; polydispersity — no more 2.5. The polymer is stabilized by non- staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines.

Cerex® fabrics are spunbond nonwoven nylon fabrics produced by spinning and autogenously bonding continuous filaments of nylon 6,6 into a thin, Smooth and strong fabric.

FluoroGrip® -Mx Membrane are stick fluoropolymer butyl lining for severe chemical and temperature resistance for concrete and steel substrates.

USI Chemical Silane USi-1302 functions as a surface modifier in fillers and pigments, where it improves the dispersibility of the filler and the mechanical properties such as flexural strength, tensile strength and modulus of the composites. The silane also has its application as an adhesion promoter in formulations and primers & reduces the filler's sedimentation tendency in the uncured polymer. Silane USi-1302 also greatly increases water (vapor) and corrosion resistance.

Synthetic rubber SIBUR BR-1500 is styrene (23.5%) and butadiene (76.5%) copolymer obtained by cold emulsion polymerization using the soaps of resin and fatty acids. The polymer is stabilized with non-staining antioxidant and contains no nitrosamines and substances that may become a source of nitrosamines.

AL121 is used as a polymer modifier via grafting reactions. The resulting pendant trimethoxysilyl groups can function as moisture-activated crosslinking sites. The Silane grafted polymer is processed as a thermoplastic and crosslinking occurs after fabrication of the finished article upon exposure to moisture.

AL69 is a bifunctional polysulfidic organosilane for the rubber industry. It is used to improve the reinforcing capability of fillers with silanol group on their surface (e.g., silicas, silicates, clay, etc.), and also as an integral part of curing systems to improve crosslinking network properties.

MD Graphene DURA PEEK Pellets incorporate a graphene oxide reinforcement with exceptional chemical resistance. DURA PEEK polymer provides long-term performance up to 255°C. This material provides long-term performance up to 240°C, with exceptional chemical resistance, excellent wear, and abrasion resistance.

Oil-filled styrene-butadiene synthetic rubber SBR-1783 SRAE is styrene [23.5%] and butadiene [76.5%] copolymer isobtained Ьу cold emulsion polymerization using the soaps of resin and fatty acids. The copolymer is stabllized with antioxidant of amine type and filled with oil SRAE [CAS #64741-88-4] with PAHs controlled content.

Millathane® 26 is often used in non-food handling applications, including rollers, because of its hydrolysis resistance and good strength properties. The inherent hydrolysis resistance of polyether urethanes makes it more forgiving in steam autoclave cure processes than polyester grades.

Fulflex® Anti-abrasion Rubber Sheets is designed for high wear and tear resistance and is well suited for lining and protective coverings in the mineral, metal, material handling, and mining industries.Features/BenefitsHigh abrasion resistance.Excellent wear and impact resistant properties.

AL 69C is a 50/50 mixture of AL69 with N330 carbon black to form a free flowing granule that is easy to use and at the same time utilize the properties of the AL 69 silane. AL 69 is a bifunctional polysulfidic organosilane for the rubber industry. It is used to improve the reinforcing capability of fillers with silanol group on their surface (e.g., silicas, silicates, clay, etc.), and also as an integral part of curing systems to improve crosslinking network properties.

Plenco® 05482 is an organic reinforced phenolic molding compound formulated with graphite to improve the abrasion resistance. 05482 is available in black and brown. 05482 is not recommended for electrical insulating applications.

Plenco® 05351 is a mineral and graphite filled phenolic molding compound. Customers have found this material useful for seal applications. Plenco® 05351 offers excellent dimensional stability, lubricity, and low abrasion properties. 05351 is available in gray. 05351 is not recommended for electrical insulating applications.

Plenco® 05350 is a mineral and graphite filled phenolic molding compound. Customers have found this material useful for seal applications. Plenco® 05350 offers excellent dimensional stability, lubricity, and low abrasion properties. 05350 is available in gray. 05350 is not recommended for electrical insulating applications.

Synthetic cis-butadiene functionalized rubber SIBUR BR-1243 E-Pro is the polymerization product of butadiene in solution in the presence of neodymium catalyst; 1,4-cis at least 97%; polydispersity not more 2.6. The polymer is stabilized by non-staining antioxidant and contains no nitrosamines or substances that may be a source of nitrosamines. The product is characterized by improved processability.