Products in Industrial: Automotive Exterior Parts

Paychlor D-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

SD Korea SVD-604 viscosity stabilizer is for stabilizing and controlling the viscosity of paste PVC sol.

TİSESTER F UNR F01 K02 HS R01 is a PBT, Flame Retardant-Halogen (Rohs Compilance), Heat Stabilized, Natural.

RUGOPPA® P60 007 NC00 is a PPA %30 glass fiber natural (Heat Stb.) for injection application.

PC-ABS Gebablend 95 type with high impact and notched impact strength.

BDT LB3752 has an excellent mold flow, hot tear resistance, bonding adhesion, good resistance to the fuel containing alcohols.

ANTIMICROBIAL MB 01SV 91A001 AM (SQ 3274) is used for Water Storage Tanks, ABS Components, Mobile Panels,Electronic Devices.

2MILA РС-022 is intended for manufacturing of industrial-used products by injection molding such as dome lamps, water supply meters, automobile headlights and lens, as well as for usage as a component in molding compounds.

Promyde® BF940 LN is a lubricated and nucleated high viscosity polyamide specially formulated for the production of films with a high transparency and improved elongation, tear and puncture resistance. Promyde® BF940LN can be processed in cast and blown film extruders. The additives package ensures good surface slip properties on the polyamide film side. Promyde® BF940LN is specially recommended in asymmetric estructures to minimize curling, specific recommendations are available on request.

Promyde® BF540 LN is a lubricated and nucleated high viscosity copolyamide for the production of soft blown films with a high transparency.

BDHT H3601 has an excellent mold flow, mold release, superior resistance to the fuel containing alcohols.

N73A-E00 is manufactured with elastic properties similar to vulcanized rubber and superior to traditional plastics. It is recyclable and reusable at the point of transformation, with a significant reduction in the weight of the piece and with an evident improvement in the profitability of the processes. It is suitable for the transformation process such as extrusion

TEXALAN® 298A This product is safe and environmentally friendly, has excellent abrasion resistance, solvent resistance, good hand feeling, repeated benefits High utilization rate, high strength and excellent processing performance.

HIBLACK® 40B2 is a general purpose conductive carbon black suitable for polyolefins and other thermoplastic materials. It is also suitable in rubber compounds.

ANTIMICROBIAL MB 04SV 91A004 AM (SQ 3294) is used for Water Storage Tanks, ABS Components, Mobile Panels,Electronic Devices.

MM-PP HE22 is PP 40% mineral filled by Extrusion Processing

Black Masterbatch 340 is used in thin films and recommended for injections,Sheets, Pipes, Blow moldings, Cables and Compound.

Techno Compound PBT4 GF 30 LW Natural (9931) is a thermoplastic which combines great hardness, stiffness and strength. TechnoDur is easily processed due to its perfect flow behavior. The favorable sliding and wear characteristics as well as extremely high tenacity in temperatures below freezing are further advantages.

Dioshy TPU T995NC is a Thermoplastic Polyurethane with a soft segment compositions of a ether group with well processing abilities, tough and elastic which are suitble to abrasion resistance, oil resistance and can be used when high mechanical properties are needed.

Nylon 6 A1030JR is a high cycle grade with low viscosity. It is used for injection molding applications.

JM-370 is high impact block copolymer which has more ethylene contents than normal block copolymer. This grade is designed to be processed in conventional Injection molding equipment. JM-370 shows better impact resistance than normal block copolymer and has good physical property balance.

SPINOPC® T63 001 BK55 1000 is a PC UNFILLED NATURAL FLAME RETARDANT

Promyde® BF840 is a new experimental biobased copolyamide without additives specially formulated for the production of cast and blown film. The renewable content of Promyde BF840 is 50%.

An Excellent Low Viscosity Polymer for High Quality Mechanical Goods

2B-ATH200 is composed of 20 microns Micronized Aluminum Trihydroxide, Gibbsite, Al (OH) 3 .

Middle Color Furnace Black (MCF) YFB3057 is a specialty carbon blacks for polymer systems. It is available in pellet form.

Starflam M10009A is an Unfilled Flame Retardant Polypropylene (Homo) Injection Molding Resin

C73A-E00 is manufactured with elastic properties similar to vulcanized rubber and superior to traditional plastics. It is recyclable and reusable at the point of transformation, with a significant reduction in the weight of the piece and with an evident improvement in the profitability of the processes. It is suitable for the transformation process such as extrusion

A206 is a Ground ATH is used in Pultrusion, BMC.

Dhara Petrochemicals Dpnor GF-M-210 is mPPE Compounds, reinforced with 20% of glass fiber, for injection molding. Dpnor GF-M-210 is widely used for submersible pump parts like bowls, impellers & diffusers, automotive parts.This product is available in Natural, Black & other colors.

Global ABS-405 FR High Impact, Flame Retardant ABS is Poly(Acrylonitrile Butadiene Styrene) thermoplastic

PC-ABS Gecomblend 3000 FR HT is a flame-retardant PC / ABS type with very good temperature resistance, fire protection class V-0 (1.5mm).

ABRIL® 9031 is a lubricant for thermoplastics based on ethylene-bis-oleamide. Capable of wide application, being equally suitable for polyolefins, polystyrene and polycarbonate. However, it is particularly suitable for use in applications requiring enhanced slip and anti-block characteristics such as EVA, PVC and polyolefin films and polyamides. Abril 9031 has a number of FDA food contact approvals making it suitable for use in many films and film coatings.