Products in Industrial Adhesives & Sealants

BONTAMIDE 2055 is a resin used for floor primer on wet ground bed

A208 is a Ground ATH is used in BMC, Carpet Backing, Rubber.

Sil-Flex HT RTV-7565 (Neutral) is a one component, low modulus, neutral cure high temperature silicone sealant and adhesive. This product offers non-corrosive adhesion to many sensitive metals such as copper, foil, brass, zinc and bronze. This product is specifically formulated to offer all weather performance to meet today's Green Building Standards.

MicroCoat Technologies E52103 is an industrial adhesive that is specially formulated to mate dissimilar substrates in a rapid, precise, and permanent manner. It gives a starting point which can lead to modifications or custom designed adhesives for your particular application.

CRACKBOND® 2100 MV (Medium Viscosity) and CRACKBOND® 2100 MV-LPL products are two-component, high strength epoxy adhesives that are ideal for bonding fresh to hardened concrete or perfect for use in a variety of repair projects. CRACKBOND 2100 MV may be used in temperatures between 40°F and 100°F (4°C and 38°C), while CRACKBOND 2100 MV-LPL, with its slower cure rate, may be used in temperatures between 60°F and 110°F (16°C and 43°C).

Kraton D1164 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 29%. It is supplied from North America in the physical form identified below. Kraton D1164 PT - supplied as a dusted dense pellet Kraton D1164 P is used in compound formulations and as a modifier of thermoplastics. It may also find use in formulating adhesives, sealants, coatings and modified bitumens.

Eternal Materials 2976PT is an unsaturated polyester based structural adhesive.

PHOTOMER® 9145 is an Unsaturated polyester oligomer diluted in DPGDA recommended for adhesion and pigment wetting.

MXBON® GENERAL PURPOSE 22401 is a low blooming and low odor cyanoacrylate adhesive, and it is specially formulated for the assembly of a variety of plastic, metal and rubbers. It is specially formulated for the assembly of difficult-to-bond materials. It will highly polymerize with moisture in the air for a fast cure and meet the highest industrial standards.

PURETOL™ 55, odorless and colorless, is a white mineral oil with a Saybolt viscosity of 530 and a specific gravity of 0.870. This product meets US FDA CFR 172.878 and FDA 21 CFR 178.3620(a) requirements. This material meets United States Pharmacopeia (USP) - Mineral Oil requirements which is used for a variety of applications such as blending food grade lubricants and in the production of cosmetics and pharmaceuticals.

Daikalac R-70 is a solution type of synthetic resin obtained by the polymerization of monomers such as vinyl acetate, acrylic ester and styrene in the presence of a solvent such as ethyl acetate and methanol.

Solventfree Aqueous, Aliphatic polyurethane dispersion based on a polyether, APEO- and TEAfree

POLYTONE™ AP 108 is a heat reactive alkyl phenolic resin formulated for use in the manufacture of contact adhesives / cements based on polychloroprene or other elastomers.

PHOTOMER® 5006 is a low viscosity, amine synergist with medium amine content. A co-polymerizable tertiary amine PHOTOMER® 5006 is used as a highly efficient co-initiator. In combination with UV acrylates it accelerates the cure of UV systems.

Omnirad BL 724 is a photo initiator blend for curing pigmented systems for UV and UV LED Lamps at 365 - 385 nm.

BONTAMIDE 2038 is a standard hardener for epoxy resin, no amine blush after curing.

ADDAPT AS 400 is a Hydrophobe Modified Alkali Soluble Emulsion rheology modifier. It is an acrylic copolymer based emulsion in water

Omnistab IN 515 is an effective liquid polymerization inhibitor or storage stabilizer for photosensitive resins and monomers. It retards the self-polymerization of UV-coating and ink formulations during storage.

Omnistab PTZ is an polymerisation inhibitor for UV/EB formulations.

C.L. Smith Industrial Company CLS-444 is a gel-like, one component material that cures to a tough, rubbery solid excellent for for installing ceramic tiles, bonding gaskets,filling joints in ductwork and equipment housings or anywhere a tight, leakproof seal is required.

Eco-Tite 5575 (Hybrid) is a one component, high modulus, fast curing, multipurpose silyl-terminated polyether (hybrid) elastomeric adhesive. When fully cured, this unique VOC compliant formula offers UV stability and tenacious stress free adhesion to PVC, concrete, glass, aluminum, painted surfaces, wood, plywood, marble, metal, plus many other common substrates. This product is specifically formulated to offer all weather performance to meet today's Green Building Standards.

MXBON® GENERAL PURPOSE 22408 is a low blooming and low odor cyanoacrylate adhesive, and it is specially formulated for the assembly of a variety of plastic, metal and rubbers. It is specially formulated for the assembly of difficult-to-bond materials. It will highly polymerize with moisture in the air for a fast cure and meet highest industrial standards.

AGITAN 218 is a defoamer for all common emulsion systems.

Rit-Chem AT25 is alpha pinene polyterpene resin. Possesses high viscosity. Used as a tackifier in hot melt and solvent-based pressure sensitive adhesive applications.

Aldirez BH is a remarkably versatile solution, facilitating sealing and bonding with just one product. It takes moisture-triggered technology to new heights, by allowing bubble-free curing at high temperatures and humidity, whilst ensuring good in-can stability in these application conditions.

AGITAN DF 6575 GM is a defoamer for all common emulsion systems. It provides the following properties which is extremely versatile, good compatibility, effective over a wide pH range.

PTM&W Industries, Inc ES6272 is a light grayish-tan two part epoxy adhesive that was developed specifically for difficult bonding problems involving similar or dissimilar materials. There are two pigmented versions of ES6279 available: ES6271 is black and ES6272 A is white. The three products are identical, except for color. These adhesives provide excellent adhesion to a wide variety of materials such as aluminum, steel, brass, concrete, brick, glass, stone, ceramics, tile and wood. These adhesives have very good handling characteristics. The mix ratio of 1 to 1 by weight or volume allows easy measuring. They have a creamy, smooth viscosity; are very easy to mix; and have good thixotropy for application to contoured or vertical surfaces without sag or runoff. These adhesives cure relatively quickly, developing sufficient “green strength” to allow bonded items to be removed from the holding fixtures and handled within a few hours. The cured material has excellent strength, as well as, good resistance to weak acids, moisture and weather.

Hagedorn NC Type H 12 is a medium high viscosity NC for flexible coatings used in adhesives application fields.

POLYTONE™ AP 121 is a non heat reactive thermoplastic alkyl phenolic resin designed to develop high tack levels in rubber compounds which are used in tire construction and mechanical goods

PHOTOMER® Aqua 6903 is a water-dilutable hexa functional urethane acrylate oligomer with fast curing and excellent toughness.

Silicone Solutions AA-106 is a fast curing, high strength acetoxy silicone RTV adhesive rubber developed for applications requiring fast development of physical properties and excellent adhesion. AA-106 is a 1-part silicone that when applied to the substrate allows handling of the bondedassembly within minutes. AA-106 works well in manual and automatic dispensing equipment.

AH255 is a Coarse Ground ATH is used in Composites.

ResinLab® RC8048 anaerobic retaining compounds are designed for use in demanding applications to fill the spaces and surface irregularities between tightly mated cylindrical parts. These products form a tough permanent bond which greatly enhances the torque and pullout strength. They are single component solvent free materials manufactured in a wide variety of viscosities and setting times to satisfy specific bonding applications. This technology increases the reliability and performance of assemblies while reducing dependence upon maintaining costly tight machining tolerances.

MXBON® SURFACE INSENSITIVE 21454 is α cyanoacrylate adhesive, and it is specially formulated for the assembly of difficult to bond materials and the gel consistency prevents adhesive flow even on vertical surfaces. It will highly polymerize with moisture in the air for a fast cure and mee t the highest industrial standards.

Kraton D1171 P is a clear, linear triblock copolymer based on styrene, butadiene and isoprene with a polystyrene content of 19%. It is supplied from North America in the form below. Kraton D1171 PT - supplied as a dusted dense pellet Kraton D1171 P can be used as a base material for hot melt adhesives. It may also find use as a base material for compound formulations and as a modifier for bitumen.

Caplinq Methacrylate Functional Adhesion Promoter is a proven supplier of industrial-grade coatings, introduces their patented Methacrylate Functional Adhesion Promoter. Aculon's Methacrylate Functional Adhesion Promoter is easy to apply and will enhance your surface's adhesive capabilities. Aculon’s Primers are easy to apply and can solve problematic adhesion issues. Also, their actives can be blended into existing formulations for increased surface adhesion of coatings and adhesives.