Products in Wire & Cable: Lubricant (Internal)

WACKER® Silicone Paste P is a translucent, vaseline-like paste that has a relatively stiff consistency and provides water repellency. When applied to parts, WACKER® Silicone Paste P offers excellent water repellency, which helps protect against corrosion. The paste also becomes softer when subjected to shear stress or other mechanical stress, such as kneading. This softening effect often makes the processing of the paste easier.

Mistron® ZSC is an off-white, high-purity, platy, fine talc that is surface treated for improved dispersion and hydrophobicity, as well as die lubrication in plastics and rubber applications. Additionally, it is used for microcellar foam nucleation in polymeric foams and for improving water resistance and electrical properties in wire and cable applications.

MistroFoam is a lower-brightness, high-purity, platy, fine talc that is surface treated for improved dispersion and hydrophobicity, as well as die lubrication in plastics and rubber applications. Additionally, it is used for microcellar foam nucleation in polymeric foams and for improving water resistance and electrical properties in wire and cable applications.

EverGlide® MB1840 is a Polyoxymethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB2450 is a Thermoplastic polyurethane polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1550 is a Polyethylene terephthalate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB250H is a High-density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB150H is a Polypropylene homopolymer polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1350 is a Polycarbonates polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB350 is a Linear Low Density Polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1450 is a polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB450 is a low density polyethylene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

K STOFF GC 10 is an innovative one-pack lubricant having excellent compatibility with the PVC melt in the extrusion process of PVC cable compounding and maintaining premium physical, electrical and esthetic properties in high-speed wire and cable extrusion line.

EverGlide® MB1950 is a Polyamide 6 polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB950 is a High Impact Polystyrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB3950 is a Ethylene-vinyl acetate polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB150 is a Polypropylene Homopolymer (PPH) which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB1150 is a acrylonitrile-butadlene-styrene polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

EverGlide® MB3450 is a Styrene Acrylonitrile polymer which makes your parts last longer, decrease heat generation, and improve lubricity. Plastics are being used to replace metal in applications where metal parts have been used for decades. We know that plastic offers many advantages to metal, however most plastics, without additives, lack the properties required for demanding applications.

Javachem® GT-500 is silicone additives are UHMW siloxane polymers that provide the balance of internal and external lubrication, and help address the problems such as die buildup, appearance defects, unstable line speed and insufficient flame retardancy. We can provide silicone additives with different carriers whatever the content or medium is, to satisfy customers’ different requirements and provide quick response in product service.

Javachem® GT-600 is silicone additives are UHMW siloxane polymers that provide the balance of internal and external lubrication, and help address the problems such as die buildup, appearance defects, unstable line speed and insufficient flame retardancy. We can provide silicone additives with different carriers whatever the content or medium is, to satisfy customers’ different requirements and provide quick response in product service.

Mittal Pigments (Mittal Group) Dibasic Lead Stearate (DBLS) is produced and supplied as a fine off-white powder, with a lead (Pb) content of 51.5%.

Libnol LC-10 is one pack lubricant system recommended for manufacturing PVC compounds for wirB / cables application.

Shandong Donglin New Materials Internal lubricant DL-60 is a neutral saturated fatty alcohol dicarboxylic acid ester, its properties are milky white or light yellow flakes or flowing powder, non-toxic and tasteless, insoluble in water, soluble in tributyl phosphate and chloroform ,this product can be used as internal lubricant for PVC to produce various PVC products.

NORAC® TPSA is a triple press stearic acid which can be used as an external lubricant in rigid PVC formulations. It also can be used in filled flexible PVC applications as both an internal and external lubricant. In some mixed metal stabilized PVC formulations, NORAC® TPSA acts as a dispersing agent for the stabilizer.

Mittal Pigments (Mittal Group) Calcium stearate is a non-toxic stabilizer and lubricant with the molecular formula Ca(C18H35O2)2. It is an insoluble calcium salt of stearic acid. Commercially it is sold as a 50% dispersion in water or as a spray dried powder. As a food additive it is known by the E number E572.

Libwax OP is a Synthetic Wax. LIBWAX - OP is a waxy external lubricant Useful for rigid PVC as well as flexible PVC Compounding / processing.

Javachem® GW-6200P is silicone additives are UHMW siloxane polymers that provide the balance of internal and external lubrication, and help address the problems such as die buildup, appearance defects, unstable line speed and insufficient flame retardancy. We can provide silicone additives with different carriers whatever the content or medium is, to satisfy customers’ different requirements and provide quick response in product service.

Oleofine Organics Finawax-C is a unique grade of fatty bisamide, designed to provide the ultimate performance in plastics processing. Its molecular configuration combines an excellent balance of polar and non-polar groups This chemical structure provides the proper solubility and compatibility relationship that enables FINAWAX-C to function as an internal / external lubricant in almost all thermoplastic and thermosetting systems.

Libnol G-4011 is a Ester-wax, Internal and external Lubricant and Very good Compatibility.

VLB-618 - External lubricant, excellent for calendering clear rigid PVC, and high speed wire & cable. VLB-618 is the vegetable based version.

VLB-602 - External lubricant, excellent for calendering clear rigid PVC, and high speed wire & cable. VLB-618 is the vegetable based version.

Shandong JinChangshu New Mstar Technology JCS-106 is the stabilizer which is a solid, neutral ester wax, It is compared with pure external lubricant, the sensitivity is lower. Due to its limited compatibility, it is not recommended for soft PVC processing.

Amisol is a Fatty Acid Ester. Amisol is an efficient combination lubricant for unplasticized or partially plasticized PVC Processing.

Libnol G-21 is a Oleochemical Derivative. Intermediate Lubricant and Good Compatibility.