Products in Wire & Cable: Binder & Resin

Dynasylan® SILBOND® Condensed serves as a raw material composed of tetraethyl orthosilicate (TEOS; Si[OEt]4 ). This substance is utilized for acid- or alkali-catalyzed hydrolysis and subsequent condensation reactions, commonly known as the sol-gel process. The rate of gelation is influenced by the concentration of water and the pH.

Dynasylan® SILBOND® 40 is an ethyl polysilicate, emerges from partial hydrolysis of tetraethyl orthosilicate (TEOS). This transformation converts ethoxy groups into hydroxyl groups, generating silanols. Subsequent condensation of silanols engenders siloxane bonds (-Si-O-Si-O-) and prompts eventual gelation. Often deployed as an intermediary, Dynasylan® SILBOND® 40 undergoes further hydrolysis to produce a binder suitable for diverse applications. These include inorganic zinc-rich primers, investment casting molds, ceramic shapes, coatings, and thermal insulation.

AGC Chemicals Americas, Inc. Fluon® ETFE ZH-885B is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as hard coat, applied through electrostatic coating method.

AGC Chemicals Americas, Inc. Fluon+™ LM-ETFE LH-8000 is a new addition to the LM-ETFE AH Series. This ETFE (tetrafluoroethylene-ethylene copolymer) has a functional group polymerized directly in to the chain backbone, allowing it to adhere to other materials. This resin is ideal for producing multi-layer structures in a one-step process without the need for surface treatment or a separate adhesive layer. LH-8000 offers the lowest melting point of all the AH series resins, yet with the same desirable properties of other ETFEs, including non-stick, excellent processability, and superior chemical resistance.

AGC Chemicals Americas, Inc. Fluon® ETFE ZL-521N is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and high fluidity. Various powder grades are available for different processing methods and application needs.

AGC Chemicals Americas, Inc. Fluon® ETFE Z-885C is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as non-stick coating, applied through electrostatic coating method.

AGC Chemicals Americas, Inc. Fluon® ETFE TL-081 is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and high fluidity. Various powder grades are available for different processing methods and application needs.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-2150 is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as low-melt ETFE, smooth surface, non-adhesive, semi-commercial coating, applied through electrostatic coating method.

AGC Chemicals Americas, Inc. Fluon® ETFE Z-8820X is a melt-processable copolymer of tetrafluoroethylene and ethylene. It possesses a unique combination of desirable properties such as higher resistance to heat and chemical attack, outstanding physical toughness, and non-stick characteristics. It is used as non-stick coating, applied through electrostatic coating method.

AGC Chemicals Americas, Inc. Fluon® ETFE ZL-520N is a melt-processable copolymer of tetrafluoroethylene and ethylene that possesses a unique combination of desirable properties such as higher resistance to heat and abrasion, stress-crack resistance, and 20% carbon fiber undercoat. Various powder grades are available for different processing methods and application needs.

Linear styrene-butadiene thermoplastic elastomer DST L 30-01 is essentially a product of styrene and butadiene block polymerization in hydrocarbon solution in the presence of alkyllithium catalyst. DST L 30-01 is dusted with calcium stearate or amorphous silica. It is containing a no staining stabilizer.

E101 is formulated APAO polymer which is mainly used in personal hygiene, baby diapers, nonwoven gowns and drapes, incontinence mattress pads, nonwoven dental bibs, pet training pads, mattress assembly, foam bonding, fiber optic assembly.

USI Chemical Silane USi-402, as a co-monomer in polymers, can improve wet scrub resistance and abrasion resistance thanks to crosslinking and better adhesion to the substrate.

Linear styrene-butadiene thermoplastic elastomer DST L 30-01 is essentially a product of styrene and butadiene block polymerization in hydrocarbon solution in the presence of alkyllithium catalyst. DST L 30-01 is dusted with calcium stearate or amorphous silica. It is containing a no staining stabilizer.

Linear styrene-butadiene thermoplastic elastomer DST L 30-01 is essentially a product of styrene and butadiene block polymerization in hydrocarbon solution in the presence of alkyllithium catalyst. DST L 30-01 is dusted with calcium stearate or amorphous silica. It is containing a no staining stabilizer.

Razeen® LR 2282 is a general purpose unmodified epoxy resin based on Bisphenol F with medium viscosity.

CHS-EPOXY 572 is a Bisphenol A/F epoxy resin

CE POL M-55 is a Modified acrylic resin (Urethane Acrylate)

CE POL M-63 is a modified acrylic resin.

Razeen® LR 1100 is a general purpose unmodified epoxy resin based on Bisphenol A with medium viscosity.

POLYTONE™ P 140 is a modified phenolic resin for use with drying oil, such as linseed & tung oil.

Replacol® 262 is alkyl phenol formaldehyde resins.

CHS-EPOXY 573 Is a Bisphenol A/F epoxy resin

Disvipol 271 is used in spar varnishes, marine enamels, chemical & weather resistant finishes. Tung oil adducts for offset printing, and wire enamels.

Araldite® GY 6010 is a general purpose unmodified epoxy resin based on Bisphenol A with medium viscosity.

RIKARESIN DME-100 is an alicyclic epoxy resin that is useful as a diluent with low viscosity and low Tg drop, has excellent weather resistance, mechanical properties, and electrical properties, and is suitable for electrical insulating materials, adhesives, paints, etc.

Golden Cashew Nut Shell Liquid Resin0459 is a transparent viscous resin with golden color film. It is highly suitable for the surface coating application, where outstanding film properties and very high resistance to water and chemicals are required. Therefore, CNSL Resin is used commonly as a paint raw material due to its high water and chemical resistant property.

CHS-EPOXY 571 is a Bisphenol A/F epoxy resin.

CHS-EPOXY 575 Is a Bisphenol A/F resin modified by difunctional reactive diluent

LESTAC TM100 is terprene modified pale yellow thermoplastic resin obtained from mainly polymerizing unsaturated aliphatic 1,3-pentadiene (1,3-piperlene) and some monomers derived from the process of thermal cracking of naphtha. The major usages are tackifier for pressure sensitive adhesive, because of its well balanced PSA properties such as tackness, adhesive strength and cohesive strength. This grade also can be use as the binder for rubber compound, tire, etc.

Caplinq DK15-02 Brown is an epoxy-based coating powder developed as an epoxy resin binder when making powdered iron core or pot-core type reactors or induction devices.

POLYTONE™ AP 112 is a heat reactive alkyl phenolic resin formulated for use in Neoprene rubber adhesives. It imparts low initial viscosity and viscosity stability to adhesives of this type.

Golden Cashew Nut Shell Liquid Resin0357 is a transparent viscous resin with golden color film. It is highly suitable for the surface coating application, where outstanding film properties and very high resistance to water and chemicals are required. Therefore, CNSL Resin is used commonly as a paint raw material due to its high water and chemical resistant property.

Golden Cashew Nut Shell Liquid Resin0051 is a transparent viscous resin with golden color film. It is highly suitable for the surface coating application, where outstanding film properties and very high resistance to water and chemicals are required. Therefore, CNSL Resin is used commonly as a paint raw material due to its high water and chemical resistant property.