Products in Electrical & Electronics: Lubricant (Internal)

Grillo-Werke AG Zinc Oxide Green Seal is a chemical element that is indispensable in the production of numerous everyday products. The variety of products calls for a specific choice of the Zinc Oxides used. With our wide range of products we are capable of perfectly meeting the various requirements for specific qualities. Zinc Oxide plays an essential role as activator in the vulcanisation process in the tire and rubber industry. It improves the elasticity of glazes in the ceramic industry..

Grillo-Werke AG Zinc Oxide Red Seal is a chemical element that is indispensable in the production of numerous everyday products. The variety of products calls for a specific choice of the Zinc Oxides used. With our wide range of products we are capable of perfectly meeting the various requirements for specific qualities. Zinc Oxide plays an essential role as activator in the vulcanisation process in the tire and rubber industry. It improves the elasticity of glazes in the ceramic industry..

Stoner, Inc. E206 Silicone Mold Release is specially formulated as a release agent and anti-stick lubricant for molded materials such as plastics, rubber, waxes, and similar materials. It is our most popular mold release because of its versatility and high performance.

Qingdao Zhongsu EVA Wax 30D is a EVA wax type.

Sunlube EBS DA-SF is in fine powder form and chemically known as Ethylene Bis Stearamide.

Trecora Chemical OX-18 is an oxidized polyethylene wax. Provides anti-block, release and gloss control properties. It is easily emulsified. Imparts a non-stick character to a coating that decreases the tendency for blocking. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can aid in the resistance properties of a coating. Can be used to control gloss to achieve a desired matt effect. OX-18 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

ProFLOW 1000 is high flow rate (MFR 1500+) polypropylene resin that quickly melt to low viscosity Newtonian fluids.

Shandong JinChangshu New Mstar Technology JCS-106 is the stabilizer which is a solid, neutral ester wax, It is compared with pure external lubricant, the sensitivity is lower. Due to its limited compatibility, it is not recommended for soft PVC processing.

Sunlube EBS DA-01 is in fine powder form and chemically known as Ethylene Bis Stearamide.

Sunlube CA-10 is in fine powder form and it is chemically known as Calcium Stearate.

Amisol is a Fatty Acid Ester. Amisol is an efficient combination lubricant for unplasticized or partially plasticized PVC Processing.

Libnol G-21 is a Oleochemical Derivative. Intermediate Lubricant and Good Compatibility.

S V Plastochem Lead Stearate is used in PVC heat stabilizer & internal lubricant.

Sunlube S-32 is in powder form and chemically known as Stearyl Stearate.

ULTRA-PLAST™ WF109 improves the fiber dispersion in wood plastic composites based on PVC. It shows lubricating properties, thus increasing the output. ULTRA-PLAST™ WF109 is also very effective in other polyolefin compounds where improved processability is needed.

Libnol G-11 is a Oleaochemical Derivative. Internal Lubricant, Good Compatibility, Excellent Flow Improver and Improved Surface Conditions.

Javachem® GT-300 is silicone additives are UHMW siloxane polymers that provide the balance of internal and external lubrication, and help address the problems such as die buildup, appearance defects, unstable line speed and insufficient flame retardancy. We can provide silicone additives with different carriers whatever the content or medium is, to satisfy customers’ different requirements and provide quick response in product service.

Javachem® GT-650 is silicone additives are UHMW siloxane polymers that provide the balance of internal and external lubrication, and help address the problems such as die buildup, appearance defects, unstable line speed and insufficient flame retardancy. We can provide silicone additives with different carriers whatever the content or medium is, to satisfy customers’ different requirements and provide quick response in product service.

Javachem® GT-150P is silicone additives are UHMW siloxane polymers that provide the balance of internal and external lubrication, and help address the problems such as die buildup, appearance defects, unstable line speed and insufficient flame retardancy. We can provide silicone additives with different carriers whatever the content or medium is, to satisfy customers’ different requirements and provide quick response in product service.

Grillo-Werke AG Zinc Oxide White Seal Special is a chemical element that is indispensable in the production of numerous everyday products. The variety of products calls for a specific choice of the Zinc Oxides used. With our wide range of products we are capable of perfectly meeting the various requirements for specific qualities. Zinc Oxide plays an essential role as activator in the vulcanisation process in the tire and rubber industry. It improves the elasticity of glazes in the ceramic industry..

Sunlube BA-10 is in powder form and chemically known as Barium Stearate.

Qingdao Zhongsu EVA Wax 500D is a EVA wax type.

Libwax C is a Fatty Bisamidewax. Libwax - C is used in nearly all major plastic processing finding application as a lubricant, mold release agent, anti block and slip additives and as a dispersant for pigments and flame retardants.

Sunlube MG-12 is in fine powder form and chemically known as 12- Hydroxy Magnesium Stearate.

In rubber compounds, ULTRA-PLAST™ ZnSt can be used as an internal lubricant. In plastic compounds, ULTRA-PLAST™ ZnSt is used as a stabilizer but it works also well as lubricant and improves the surface finish of molded parts.