Products in Electrical & Electronics: Good Electrical Properties

ELASTOSIL® LR 3072/30 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3072 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.

GENIOSIL® XL 10 is an alkoxyvinyl silane compound. When exposed to moisture, the silane undergoes hydrolysis, resulting in the release of methanol. This hydrolysis process leads to the formation of silanols, which have the ability to react with each other and form siloxanes. The applications of GENIOSIL® XL 10 include marine and protective coatings, plastic additives, and plastic crosslinking.

ELASTOSIL® LR 3856/20 A/B is a high-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3856 series. It is a paste-like, easily pigmentable, two-component product with short curing times and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.

ELASTOSIL® LR 3842/40 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

ELASTOSIL® LR 3675/30 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3675 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3070 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the low compression set, there is no need to post-cure finished parts.

ELASTOSIL® LR 3065/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3065 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3003 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® LR 3005/70 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.

ELASTOSIL® LR 3043/40 A/B A/B is a liquid silicone rubber of the ELASTOSIL® LR 3043 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 3003/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® LR 3851/50 A/B is a low-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3851 series. It is a paste-like, easily pigmentable, two-component product with a short curing time and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.

ELASTOSIL® LR 3842/70 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily  pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.

Dynasylan® GLYMO is a bifunctional organosilane, featuring a reactive organic epoxide and hydrolyzable inorganic methoxysilyl groups. This dual reactivity empowers Dynasylan® GLYMO to chemically bond with both inorganic materials (e.g., glass, metals, fillers) and organic polymers (such as thermosets, thermoplastics, elastomers). It functions as an adhesion promoter, crosslinking agent, and surface modifier.

Dynasylan® AMMO is a bifunctional organosilane, presents a reactive primary amine and hydrolyzable inorganic methoxysilyl groups. Its dual reactivity enables chemical bonding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (e.g., thermosets, thermoplastics, elastomers). Functioning as an adhesion promoter and surface modifier, Dynasylan® AMMO is a clear, colorless liquid with an amine-like odor. It shows solubility in alcohols and aliphatic and aromatic hydrocarbons.

Dynasylan® VTMO is a bifunctional organosilane, combines a reactive vinyl group and a hydrolyzable inorganic trimethoxysilyl group. Its versatile reactivity enables chemical bonding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (such as thermosets, thermoplastics, elastomers). Functioning as a crosslinking agent, adhesion promoter, and surface modifier, Dynasylan® VTMO offers diverse applications.

Dynasylan® 6598 is an oligomeric siloxane featuring vinyl, propyl, and ethoxy groups. Developed from Dynasylan® VTMOEO, this colorless and nearly odorless liquid brings enhanced properties. Acting as an excellent silane compatibilizer, it bridges inorganic fillers like kaolin, MDH, and ATH with organic polymers such as EPDM, EVA, and PE. In mineral-filled and peroxide-crosslinked cable systems, Dynasylan® 6598 improves mechanical and electrical attributes, especially in moist conditions. With its high boiling start and flash point, it ensures safety, handling ease, and processing advantages. Furthermore, this product emits significantly less hydrolysis ethanol (VOC) compared to monomeric silanes, addressing environmental considerations.

Dynasylan® GLYEO is a bifunctional organosilane, features a reactive organic epoxide and a hydrolyzable inorganic triethoxysilyl group. Its dual reactivity facilitates chemical bonding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (e.g., thermosets, thermoplastics, elastomers). Serving as an adhesion promoter, crosslinking agent, and surface modifier, Dynasylan® GLYEO is a colorless, low-viscosity liquid with a subtle terpentine-like odor. It readily dissolves in alcohols, ketones, and aliphatic and aromatic hydrocarbons.

Dynasylan® VTEO is a bifunctional organosilane, boasts a reactive vinyl group and a hydrolyzable inorganic triethoxysilyl group. With its dual reactivity, Dynasylan® VTEO forms chemical bonds with both inorganic materials (e.g., glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). This compound serves as a crosslinking agent, adhesion promoter, and surface modifier, providing versatile applications.

Dynasylan® SIVO 214 is an aminofunctional silane composition with enhanced crosslinking activity. It serves as an adhesion promoter, facilitating bonding between inorganic materials (such as glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). Additionally, it functions as a surface modifier and supports chemical modification of various substances.

Dynasylan® MTMO is a bifunctional organosilane, featuring a reactive organic mercapto and a hydrolyzable inorganic methoxysilyl group. Its versatile reactivity enables chemical bonding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (such as thermosets, thermoplastics, elastomers). Serving as an adhesion promoter, crosslinking agent, surface modifier, or reactive reagent, Dynasylan® MTMO offers multifaceted functionality.

VESTAKEEP® 5000 G is a high-viscosity, unreinforced polyether ether ketone suitable for injection molding and extrusion. It is a semi-crystalline polymer with superior thermal and chemical resistance. Parts made from VESTAKEEP® 5000 G have low flammability and can be processed using standard machines for thermoplastics.

Dynasylan® AMEO is a bifunctional silane, encompassing a reactive primary amino group and hydrolyzable ethoxysilyl groups. Its dual reactivity enables Dynasylan® AMEO to establish chemical bonds with both inorganic materials (e.g., glass, metals, fillers) and organic polymers (such as thermosets, thermoplastics, elastomers). It serves as an adhesion promoter, crosslinker, and surface modifier.

Duratron® T5530 PAI is a high-performance, glass-reinforced polyamide-imide material that offers exceptional rigidity, retention of stiffness, low thermal expansion, and outstanding load-carrying capabilities. This 30% glass-reinforced grade is ideal for structural applications in the semiconductor, electronics, and aerospace industries, where high strength, stiffness, and dimensional stability are required.Features:High rigidity and retention of stiffnessLow thermal expansionOutstanding load-carrying capabilities30% glass reinforced for added strength and stiffnessBenefits:Suitable for structural applications in harsh environmentsOffers exceptional dimensional stability up to 260°CIdeal for precision parts in the electronic and semiconductor industriesApplications:Aerospace and defenseSemiconductor and electronicsIndustrial machinery and equipmentMedical devicesPrecision parts in high-temperature environmentsNote: The suitability of Duratron T5530 PAI for sliding parts should be carefully evaluated as the glass fibers may cause abrasion to the mating surface.

Sultron® Polysulfone PSU is a versatile and reliable thermoplastic material that offers a combination of excellent mechanical, thermal, and electrical properties. With its ability to withstand high temperatures and resist a wide range of chemicals, Sultron® PSU is the ideal solution for applications that demand the highest level of performance and durability. Features: Translucent material with excellent mechanical, thermal, and electrical properties Often replaces polycarbonate in applications requiring higher temperature resistance and improved chemical resistance Outstanding radiation stability and resistance to acidic and salt solutions, detergents, hot water, and steam Benefits: Broad temperature range capability makes Sultron® PSU suitable for a wide range of applications Good thermal and electrical insulation characteristics ensure consistent performance in demanding environments Hydrolysis resistant and radiation stable, making it a reliable choice for analytical instrumentation, medical devices, and semiconductor process equipment components Applications: Analytical instrumentation Medical devices Semiconductor process equipment components Any application that demands high temperature resistance and chemical resistance.

Altron™ 1000 PC machine grade polycarbonate is a transparent, amorphous thermoplastic that offers exceptional impact strength and elasticity, minimal moisture absorption, and outstanding resistance to acidic solutions. This grade is produced from select batches of non-UV stabilized polycarbonate resin that complies with EU and FDA regulations for plastics intended to come into contact with food products.Features:Transparent, amorphous thermoplasticSuperior impact strengthSuperior flexural modulus of elasticityMinimal moisture absorptionOutstanding resistance to acidsGreat electrical characteristicsBenefits:Durable and able to withstand high impactsResistant to deformation under loadLow moisture absorption means no swelling or warpingResistant to acidic solutions, making it suitable for a variety of applicationsExcellent electrical characteristics, making it suitable for semiconductor and electronics applicationsApplications:Semiconductor and electronics applicationsTransparent structural applicationsFood contact applications that comply with EU and FDA regulations

SABIC's Specialties Business ULTEM™ Resin 1010 is an unreinforced amorphous polyetherimide (PEI) resin that offers a high glass transition temperature (Tg) of 217°C and improved flow. Its features include excellent mechanical, electrical, and dimensional properties up to high temperatures. The material also offers very good chemical resistance for an amorphous material and is inherently flame retardant, offering UL94 V0 and 5V ratings as well as aerospace FAR 25.853 compliance. ULTEM™ Resin 1010 is RoHS compliant, and the natural, uncolored material is halogen-free according to standards IEC 61249-2-21, IPC 4101E, and JEDEC JS709B. Compliance for colored variants needs to be checked on a case-by-case basis. The base material is transparent amber-colored but is also available in custom colors, both transparent and opaque. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business EXTEM™ Resin XH1015UCL is an unreinforced amorphous thermoplastic polyimide (TPI) resin that offers a high glass transition temperature (Tg) of 267°C. It features excellent mechanical, electrical, and dimensional properties at high temperatures. The material also has good near-IR transparency and a high refractive index, making it an excellent candidate for SMT applications that require injection moldable optical lenses and connectors. The material is RoHS compliant, and the natural, uncolored material is halogen-free according to IEC 61249-2-21, IPC 4101E, and JEDEC JS709B standards. Compliance for colored variants needs to be checked on a case-by-case basis. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business LNP THERMOCOMP OFC08 compound is based on Polyphenylene sulfide (PPS) resin containing 40% glass fiber. Added features of this grade include: High Modulus and Strength, Good Impact Strength and Ductility, Excellent Heat and Chemical Resistance, Good Electrical properties and Inherently Flame-Retardant. It is also an Easy Flow grade with Good Flash Control. Applications of this grade include electric and electronic components, and various parts requiring high strength and high heat resistant. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business EXTEM™ Resin RH1016UCL is an unreinforced amorphous thermoplastic polyimide (TPI) resin that offers a high glass transition temperature (Tg) of 279°C. It has excellent mechanical, electrical, and dimensional properties up to high temperatures. The material has good near-IR transparency and a high refractive index, making it an excellent candidate for surface-mount technology (SMT) at the JEDEC standard temperature of 260°C, requiring injection-molded optical lenses and connectors. The material is RoHS compliant, and the natural, uncolored material is halogen-free according to standards IEC 61249-2-21, IPC 4101E, and JEDEC JS709B.

ELASTOSIL® Film 2030 is a high-precision silicone film made from cross-linked silicone rubber. The film shows a maximum thickness variation across the total width of less than ±5%. The precision allows for constant electrical resistance and good comparative tracking resistance across a broad range of temperatures.

SABIC’s NORYL NHP8000VT3 resin delivers thin-wall, non-brominated, non-chlorinated flame retardance and achieves one of the highest comparative tracking index level (CTI PLC0). Potential applications include insulation film for higher-voltage EV batteries. This resin is a non-reinforced blend of polyphenylene ether (PPE) and polystyrene (PS)that can provide outstanding heat resistance, ultra-thin-wall flame retardancy, and superior tracking resistance performance. NORYL NHP8000VT3 Resin may be evaluated in extrusion and injection molding processes. It contains a non-brominated and non-chlorinated flame retardant, ensuring adherence to many safety standards while avoiding specific halogens. NORYL NHP8000VT3 Resin has:  -   A Comparative Tracking Index (CTI) of PLC 0 (600V)  -   A UL94 flame rating of V0 at 0.25mm thickness It leverages an extraordinary technology that provides: -   High impact strength -   Heat resistance -   Dimensional stability -   Hydrolytic stability -   Electrical performance -   Low moisture absorption -   Low specific gravity. SABIC’s NORYL NHP8000VT3 resin won a bronze 2023 Edison Award in the Enhanced Performance category.

Mistron® ZSC is an off-white, high-purity, platy, fine talc that is surface treated for improved dispersion and hydrophobicity, as well as die lubrication in plastics and rubber applications. Additionally, it is used for microcellar foam nucleation in polymeric foams and for improving water resistance and electrical properties in wire and cable applications.

MistroFoam is a lower-brightness, high-purity, platy, fine talc that is surface treated for improved dispersion and hydrophobicity, as well as die lubrication in plastics and rubber applications. Additionally, it is used for microcellar foam nucleation in polymeric foams and for improving water resistance and electrical properties in wire and cable applications.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50HK(KN) is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 21GS is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 25MW is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.

AGC Chemicals Americas, Inc. Fluon® ETFE Film - Advanced Fluoropolymer Film 50MW is a high-performance film made from AGC’s own ETFE resin. The film has excellent heat and chemical resistance, anti-stick properties, electrical properties and long-term weatherability; properties typically associated with fluoropolymers. Due to its exceptional durability, transparency and antifouling properties Fluon® ETFE Film is used in a wide range of applications such as mold release film for electronic components, interior design, outdoor architectural applications, solar cells, greenhouses and a whole host of other innovative areas.