Products in Electrical & Electronics: Filler

E GLASSFLAKE UNMILLED GF100E by Glassflake Limited is comprised of Calcium aluminum borosilicate. It is commonly used as Filler for a variety of applications in Aerospace.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

HeBoFill® CL-ADM 020 is a Boron Nitride powder with a high level of purity, high crystallinity and excellent free flowing characteristics. It is particularly suitable for use as filler and additive in polymer materials to improve their thermal conductivity.

E GLASSFLAKE MILLED GF500ME by Glassflake Limited is comprised of Calcium aluminum borosilicate. It is commonly used as Filler for a variety of applications in Aerospace.

The LKB-series of LITHOS solely includes talc products based on high quality resources. To offer applications in numerous areas, LITHOS manufactures a variety of different products.

E GLASSFLAKE MILLED GF750ME by Glassflake Limited is comprised of Calcium aluminum borosilicate. It is commonly used as Filler for a variety of applications in Aerospace. It is available in Flakes form.

The LithoFill product series is based on a very pure, natural clinoptilolite zeolite, which is characterized by a very high porosity and cation exchange capacity. Because of their high clinoptilolite content, these products act as functional additives with specific properties in various industrial applications. Due to the high cation exchange capacity of LithoFill, the product is able to bind and neutralize large quantities of molecules – this captures unwanted odors and liquids or releases specific flavours.

Hyper MP 33 a speciality calcined clay developed by calcining the purest and processed Kaolin.

The LithoFill product series is based on a very pure, natural clinoptilolite zeolite, which is characterized by a very high porosity and cation exchange capacity. Because of their high clinoptilolite content, these products act as functional additives with specific properties in various industrial applications. Due to the high cation exchange capacity of LithoFill, the product is able to bind and neutralize large quantities of molecules – this captures unwanted odors and liquids or releases specific flavours.

Hyper 60 DV is a calcined metakaolin produced by removing chemically bound water from the crystal structure. This calcined clay is then specially treated with organo silane of two different chemistry.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

ACMA 20T Coated Calcium Carbonate is natural, surface treated, ultra fine calcium carbonate manufactured from high purity, very white limestone.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

The StanoStat CP range of antimony tin oxides (ATO) combine semi-conductive properties with a very light gray colouration. Compared to other ATO grades, where the blue shade is dominant, the StanoStat CP grades offer great variation in the coloring of the finished product.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

LITHOS Talc LPP is highly lamellar, very soft talc with good aspect ratio. This is realized by a specific delaminating process, which creates best lamellar structure instead of breaking the plates in smaller parts. Products with a top cut to 10 microns and respectively median particle sizes of 2 microns are realised.

Optically clear, solid fused amorphous silica microspheres specially engineered for optimum dispersion in paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion and impact resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including mar and scratch resistance. Ideally suited for specialty applications where mechanical and rheological properties are required. Median particle size of 3 to 4 microns, with a particle size range of 0.5 microns to 92% passing 22 microns.

HeBoFill® LL-SP 050 is a Boron Nitride powder with good crystallinity and a narrow grain size distribution. Its fine particle size and low agglomerate content makes it suitable for a wide variety of applications.

Hyper 60 DM is a calcined metakaolin produced by removing chemically bound water from the crystal structure. This calcined clay is then specially treated with organo silane of two different chemistry.

HeBoFill® CL-SP 045 is a pure Boron Nitride powder with a coarse grain size distribution. Its average particle size is 45 μm. The extremely low specific surface area allows high filler loadings with a minimum viscosity increase. It is particularly suitable as a filler in polymers, allowing the thermal conductivity to be increased without affecting the electrically insulating properties.

E GLASSFLAKE MILLED GF100ME by Glassflake Limited is comprised of Calcium aluminum borosilicate. It is commonly used as Filler for a variety of applications in Aerospace.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

Optically clear, solid fused amorphous silica microspheres specially engineered for paints, coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These microspheres increase corrosion resistance, reduce shrinkage, improve adhesion and impact resistance, and enhance surface qualities including mar and scratch resistance. The Sunspheres™ 15.0 have a median particle size of approximately 15.0 microns, with 90% of particles passing 45 microns.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

HeBoFill® CL-SP 035* is a high-purity boron nitride powder with a very distinct crystal structure and single crystallites in the range of 35 pm. It is further characterized by its low density and intrinsic high thermal conductivity. Since large crystallites conduct heat much faster, it is predestined for use as a filler and additive in plastics. Thereby, their thermal conductivity is significantly increased, while simultaneously maintaining good electrical insulation.

LITHOS Talc LP is a highly lamellar, very soft talc with a huge aspect ratio. This is realized by a specific delaminating process which creates the optimal lamellar structure without breaking the plates in smaller parts. Furthermore it is equipped with extraordinary whiteness and thereby suitable for applications of the highest quality, in plastic, paper and the coating industry.

The LKB-series of LITHOS solely includes talc products based on high quality resources. To offer applications in numerous areas, LITHOS manufactures a variety of different products.

E GLASSFLAKE MICRONISED GF005E by Glassflake Limited is comprised of Calcium aluminum borosilicate. It is commonly used as Filler for a variety of applications in Aerospace.

Universal Colorant Company PVC Forming Masterbatch is the best filler for use in food grade and medical grade plastic industry. All these types of masterbatches are offered in different varieties of sizes, colors and shades. PVC masterbatches is best known for its quick dispersibility, lower dosage, migration resistance, weather resistance and non- blooming properties. These are suitable to use in rigid and foam PVC products including cables and profiles.

Microglass® glass flakes ® comes in scale-like glass flakes. Utilizing its own proprietary technology, NSG Group is the only manufacturer of glass flakes in Japan. Two types of glass are used for glass flakes E®, namely, C glass and E glass. C glass contains alkali components and has high acid resistance. E glass contains almost no alkali and so, it has high stability in resin and no electrical conductivity. For each type, NSG Group also offers surface treatment to improve compatibility with resins.

E-SPHERES® ES150 are General Purpose Fine Grade Standard Hollow Ceramic Microspheres.

CarbonX® XR-1 is delivered in pelletized powder form in 20kg PP bags. For bulk orders, CarbonX® can be delivered in 1000 kg FIBCs and also available in masterbatch form for thermoplastics and elastomers. Masterbatches have been optimally mixed to ensure the highest quality possible in the final product while cutting down on lead times for R&D and Production.

KV-9010 is a Close match to RAL 9010. It is used in PVC cables, Plasticized PVC extrusion or injection articles.

Karntner Montanindustrie HAR 55 is a calcium inosilicate mineral (CaSiO3) that may contain small amounts of iron, magnesium, and manganese substituting for calcium.