Products in Electrical & Electronics: Glass Beads & Fibers

469E - 600 is a Twist‑free and alkali‑free direct yarn, suitable for pultrusion process, used for pultrusion of fish floats, reinforced cores, tent poles, profiles, etc. Suitable for polyester resin ( UP ), vinyl resin ( VE ).

467R-2400 is Used for PU Wire poles, pultruded profiles, etc., winding and pultrusion processes. Suitable for polyurethane resin ( PU ).

Hesgon Company Polyester-Glass Heat Shrink Tape 56-36PG is selvage edge tape that is constructed with polyester yarn in the warp direction and fiberglass yarn in the filling direction. Shrinkage will occur in the longitudinal direction in order to have a very tight wrap. Sharp corners and curves can be wound without the tape buckling or puckering and the correct overlap can be maintained since the tape will not shrink in the transverse direction.

D1-115-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

468A roving is used in filament winding, pultrusion and weaving applications in epoxide resin systems. The direct rovings can be used to manufacture pipes, tanks and other insulations.

Jiangsu Changhai Composite Materials FIBERGLASS WET CHOPPED STRANDS 502 are produced from continuous filament strands and used as raw material of fiberglass paper and fiberglass tissue mat, it’s widely uses in building materials, petrochemistry, light industry and electrical industry, the main applications are battery separators, asphalt felts, etc.

D3-110-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

276 Assembled Roving is is based on E6 glass formulation, coated with a silane-based sizing. 276 is compatible with unsaturated polyester, yinyl ester, and epoxy resins. It is designed or filament winding and pultrusion applications. 276 is suitable for use in tent pole, outdoor travel goods, pressure vessels, pipes, craft and chemical storage tanks.

3B Fiberglass EM 1011 is a non-woven mat made from 3B E-CR glass filaments, consisting of chopped fibers randomly and yet evenly orien-tated. The 50 mm length chopped fibers are coated with silane coupling agent and are held together using emulsion binder. CSM is particularly suitable for hand lay-up process using thermoset resin systems to manufacture wide range of products for automobile, recreation, chemical, electrical industries.CSM EM1011 conforms to BS 14118 and IS 11551.

3B Fiberglass CM 4020 is a non-woven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane coupling agent and the layers held together with a suitable binder. The CFM products contain an insoluble binder compatible with both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester, vinyl, ester, epoxy and polyurethane resin systems. The CM 4020 mat is ideally suited for injection molding RTM and S-RIM processes. The CM 4020 mat has a high rigidity which helps to work with large CFM cuts without loosing _x005F_x001f_bres. The ex-cellent mechanical properties provided by CM 4020 combined with the good electrical properties of the resins make the molded parts attractive for applica-tions like the electrical apparatus (high voltage), transportation and automotive industries, infrastructures equipments.

GC802001020T Glass-Carbon Nonwoven is a Wet-laid nonwoven consisting of 80% glass fiber and 20% 7- um-diameter carbon fiber staple (1/8 - 1") with PVA binder. (Other binders are available.)

COMFIL offer fabrics of the produced thermoplastic composite yarns.

G10001010T of G10001xxxT Series of Glass Nonwovens is Wet-laid nonwovens consisting of 11-um diameter E-glassfiber staple (1/2") with 1-20 wt.% of polyvinyl alcohol binder. Widths can be specified.

COMFIL develop and manufacture tailor-made thermoplastic composite yarns/roving

G10001034T of G10001xxxT Series of Glass Nonwovens. is Wet-laid nonwovens consisting of 11-um diameter E-glassfiber staple (1/2") with 1-20 wt.% of polyvinyl alcohol binder. Widths can be specified.

COMFIL offer fabrics of the produced thermoplastic composite yarns.

3B Fiberglass DS 2200-10P is a 10 μm filament diameter, 4 mm long chopped glass fiber designed for production of high performance polyolefin compounds.DS 2200-10P shows outstanding compatibility with Polypropylene and enables improvements of material’s performances such as tensile and flexural strength, impact and creep, hence opening new design possibili-ties for lighter parts. DS 2200-10P is also designed for parts weathering in prolonged contact with water, deter-gents and glycol DS 2200-10P can also be used in applications complying with strin-gent requirements of food contact and drinkable water standards EC 10/2011, FDA, BfR and ACS. DS 2200-10P is supplied on a pel-letized form and offers outstanding feeding-to-extruder behavior as well as excellent fiber impregnation and dispersion.DS 2200-10P’s sizing chemistry also requires reduced amount of cou-pling agents to reach parts’ optimum mechanical performances.

3B Fiberglass DS 7720-14P is designed to reinforce polyacetals POM resins with glass fiber. Its sizing has been developed specifically for POM and presents good properties in term of chemical and hydrolysis resistance. DS7720-14P has been developed in order to help reinforced plastics to meet the requirements of the most common food contact norms: EC 10/2011 and FDA Its very light color allows this product to be used in any natural grade compounds without impacting the color of the final part.An innovative manufacturing technology provides DS7720-14P chopped strand with an excellent bulk density. As a result, this product exhibits very good feeding properties compared to other competitive glass fiber materials.

EWR270 is a plain type woven roving which are compatible with UP, VE, EP and PF resins. Woven rovings are a weight range of 260g/m -1,600 g/m and available with a width range of 50mm-3,000mm.

ECS 303A-3 (7) is a Standard product for PET, PBT and PC. NPE free.

3B Fiberglass M8610 is a non-woven mat made out of ECR glass _x005F_x001f_laments, consisting of continuous _x005F_x001f_bres randomly oriented in multiple layers. The glass _x005F_x001f_bre is bonded with a silane cou-pling agent and the layers held together with a suitable binder.The CFM products contain an insolublebinder compatible with both un_x005F_x001f_lled or _x005F_x001f_lled unsaturated polyester, vinyl ester, epoxy and polyurethane resin systems. The M8610 mat is ideally suited for injection molding, RTM and S-RIM processes for molding complex parts. The M8615mat version, with its high rigidity, helps to work with large CFM cuts without loosing _x005F_x001f_bres. The excellent mechanical properties provided by CFM combined with the good electrical properties of the resins make the molded parts attractive for applications like electrical apparatus (high voltage), transportation & automo-tive industries and infrastructuresequipments.

469H Roving is used in filament winding, pultrusion and weaving applications in epoxide resin systems. The direct rovings can be used to manufacture optic cable protective sleeves, pipes and pultruded profiles.

COMFIL develop and manufacture tailor-made thermoplastic composite yarns/roving

D3-440-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

COMFIL offer fabrics of the produced thermoplastic composite yarns.

G10001050T of G10001xxxT Series of Glass Nonwovens. is Wet-laid nonwovens consisting of 11-um diameter E-glassfiber staple (1/2") with 1-20 wt.% of polyvinyl alcohol binder. Widths can be specified.

COMFIL offer fabrics of the produced thermoplastic composite yarns.

COMFIL develop and manufacture tailor-made thermoplastic composite yarns/roving

COMFIL develop and manufacture tailor-made thermoplastic composite yarns/roving

D1-480-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

Fiberglass conductive roving is composed of multiple ends of continuous filament yarn, which have been treated with a coating, which imparts electrical conductivity. The roving is provided with an overwrap of uncoated, twisted continuous filament yarn to maintain the integrity of the roving bundle. This over wrap is available in a single over wrap (B4, B5, B10, B13) and a double over wrap format (BX10, CX19).

Fiberglass conductive roving is composed of multiple ends of continuous filament yarn, which have been treated with a coating, which imparts electrical conductivity. The roving is provided with an overwrap of uncoated, twisted continuous filament yarn to maintain the integrity of the roving bundle. This over wrap is available in a single over wrap (B4, B5, B10, B13) and a double over wrap format (BX10, CX19).

ECS 304A-3 is a Standard product for AS and ABS. Applied in automobile and electric products. NPE free.

3B Fiberglass DS 1128-10N is designed to reinforce a broad range of polyamide resins, including PA6, PA66, PA610, PA6/66 copolymers and semi-aromatic PA.When molded this product exhibits outstanding dry mechanical proper-ties, excellent hydrolysis/glycolysis resistance, high heat aging resis-tance and no sensitivity to mold release agents commonly used, such as calcium stearate. It can also reinforce and offer excellent perfor-mances in all impact modified and flame retardant polyamide formula-tions. An innovative manufacturing technology provides DS 1128-10N chopped strand with an excellent strand integrity and bulk density. As a result this product exhibits ex-cellent feeding properties with very low fuzz generation.The product is also designed for use in pneumatic conveying system and high throughput compounding line.

D1-041-AB Boron-free glass direct rovings or single-end continuous rovings are designed for use in filament winding, pultrusion and weaving applications in polyester, vinyl ester or epoxy resin systems. Typical products include pultrusion profiles such as window frames, ladders, telecommunication cables and gratings. High-voltage insulating rods, tanks and pipes, etc. are also included.

YF International BV Fiber Glass is made from recycled glassfiber.