Products in Sports & Recreation: Epoxy & Epoxy Derivatives

MITO® E-GO™ RES-1 is a laminating epoxy resin powered with our flagship product MITO® E-GO, a modified graphene oxide additive that makes graphene easy to use and accessible to all.   Designed for Compression molding applications for high-performance sporting goods, it boosts the performance of fiber-reinforced applications, resulting in significantly improved durability while maintaining a lighter weight. Secondary properties such as damping, thermal conductivity, and resistivity are also expected.   This product is sold as a kit consisting of 1 gallon of Resin loaded with 1% of MITO® E-GO® and 1 quart of MITO® standard accompanying hardener. Graphene Council Mito Materials provides in-resin graphene additive for composites Mito Materials provides in-resin graphene additive for composites

S-381-N5 is a modified, micronized blend of natural and synthetic wax that has a uniform melting range peaking at 91°C. Shamrock's product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes.

GP® CL-7004 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

GP® CL-7003 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

GP® CL-7002 phenolic resin from Georgia-Pacific Chemicals is a thermoplastic novolac. It is used as a crosslinking resin for epoxy and polyester resins. Its low phenol content, convenient softening point, and melt viscosity are conducive for use in powder coatings.

S-394-N1 is a synthetic wax with a DSC melt peak above 110°C and good onset of melting. Shamrock’s product line of micronized waxes provide rub and abrasion resistance. Included in this line are products that provide gloss, matting, clarity, and controlled slip in a range of particle sizes

Evopreg® ampliTex™ – Carbon Hybrids can be combined with traditional carbon fiber-epoxy prepregs to produce a high performance hybrid offering the benefits of both materials. By replacing carbon bulking plies with flax, it is possible to produce a “thin sandwich” structure that retains the bending stiffness of an all-carbon laminate, whilst also delivering the weight reduction, vibration damping and reduced environmental impact that flax offers.

Rhino Linings USA, Inc. 1382 Resin is a Low Modulus Flexible Epoxy Resin.1:1 highly flexible epoxy system. Retains flexibility at low temperature. 150% elongation, even when aged. Convenient 1:1 volumetric mix ratio.

HexPly® F593 is a modified 350°F (177°C) curing epoxy system with very low flow for carbon fabric and tape applications that provides excellent laminate and honeycomb sandwich properties. As a low flow resin, HexPly® F593 lends itself to net resin, zero bleed applications. HexPly® F593’s low flow minimizes sandwich part porosity.

HexPly® M77 is a fast curing hotmelt, thermosetting epoxy resin matrix, specifically designed for prepreg applications at which short cure cycles are required. M77 is recommended for curing at 120 – 150°C and is suitable for a range of pressures (5 – 35bar). M77 can be used for manufacture of large industrial components, suitable for cure of thin and thick sections.

Rhino Linings USA, Inc. 1310L-6 Resin allows the parts or tools to be used in many elevated service temperature environments. Low mixed viscosity quickly wets thick reinforcements. Convenient 4:1 volumetric mix ratio.

Rhino Linings USA, Inc. 1308NC Resin is a Economical Low Viscosity General Purpose Epoxy Resin. Low viscosity, economical general purpose epoxy resin with low odor. Used for fiberglass laminating and civil engineering applications.

Toray Toray AmberTool® HXR56 New is a low temperature curing epoxy composite tooling prepreg, fully impregnated into a carbon multiaxial backing ply construction. This two-layer product facilitates 3-D construction while allowing efficient lay-up, reducing overall tooling costs. HXR56 prepreg is co-compatible with our heritage AmberTool® HX56 carbon 205gsm 2x2 twill reinforcement surface ply. After a suitable post cure, an end use temperature of 180°C (356°F) is achieved. 40–55°C (104–131°F) Low Temperature Curing Epoxy Tooling Prepreg.

APCM DA 4518 E-Glass is a modified epoxy system coated on heavy weight unidirectional E-Glass fibers. This product is designed to build excellent unidirectional strength using a minimum number of plies. DA 4518/E-Glass Uni also features extended room temperature out time and service temperatures to 300°F.

HexPly 1458 is a self-extinguishing and self-adhesive modified epoxy resin system for monolithic and sandwich structures. HexPly 1458 has excellent temperature and moisture resistance. It has a versatile cure cycle at 160°C to 180°C and it has an excellent shelf life at room temperature. HexPly 1458 prepregs are only available in fabric form.

Rhino Linings USA, Inc. 1320 Resin is a Ultra Low Viscosity Epoxy Resin. Ultra low viscosity epoxy for infusion. Used for producing composite laminates using injection or vacuum infusion techniques at ambient temperature.

HexPly® M10E is an epoxy resin system preimpregnated into aramid, glass or graphite multiaxial fabrics and unidirectional fibers. HexPly® M10E prepregs are recommended for the production of low cost, large thicksectioned industrial structures.

GMS Composites EP-282 is a formulated epoxy resin matrix prepreg with long shelf life. The product has a versatile curing cycle from as low as 80°C or as high as 150°C, thus enabling the product to be used to produce a wide range of composite items, from large structures to numerous small components. EP-282 is a resin film available on a lightweight scrim or without a scrim. The EP-282 resin is compatible with GMS Composites pre-pregs. The resin film has good flow and the tack of EP-282 can be varied.

AX-5202HT is a High Temp Cosmetic Epoxy Carbon Prepreg.

MICAM’s E7 Grade is an epoxide resin laminate, based on a medium weave glasscloth, with excellent electrical, mechanical and thermal characteristics , when compared to conventional laminates.

CHS-EPOXY 130 is a Medium molecular weight "3 - type" epoxy resin.

PRF Composite Materials RS-L285 has very low mixed viscosity, ensuring a fast and complete impregnation of reinforcement fibers without drainage on vertical surfaces. The addition of fillers such as colloidal silica, microballoons, metal powder etc., is also acceptable to obtain special properties. The RS-L285 epoxy resin system exhibits good mechanical properties after curing at room temperature. If high temperature strength (≥ +60°C) or aircraft approval is not required, finished products made with the selection of hardener RS-H285 may be used without further heat treatment. Post curing (heat treatment) will further enhance the mechanical properties and will also increase the high temperature strength, up to 100°C being achievable depending on the selected hardener and post cure cycle used. The properties indicated in this document may only be achieved by curing/post-curing above 50°C.

Shanghai Sunwise Chemical MTC510FRB is a flame retardant epoxy resin system designed to cure between 80°C and 120°C allowing flexibility in component manufacture. It is a toughened, flame retarded epoxy resin system designed for component manufacturing that can be supplied on a variety of fabrics and in UD format to meet your cost and manufacturing requirements. This resin system color is black.

8020 Rapi-Ply is a Outstanding vacuum-bag-only (out-of-autoclave) processing capability. No debulking required off Bi-layer form facilitates fast lay-up

Razeen® SR 5357 is a Solid epoxy resin based on bisphenol A and phenol novolac for powder coating.

TG43/5 is a B-staged epoxy prepreg based on a fine weave glass fabric suitable for the manufacture of tubes and laminates.

Park’s E-770 is a 350°F (176°C) curing, flame resistant modified epoxy system for 200°F (93°C) service and meets the requirements of Mil R-9300-B, Type I. It has excellent green strength developing properties quickly and doesn’t need a post cure to maintain its 200°F (93°C) properties.

Ecotechnilin L-FLAXPREG-T-UD-110-5m² is a unidirectional (UD) fibers - FLAXPREG T-UD 110.

Havel Composites CZ sro Epoxy resin LH 260 is characterized by low viscosity. When curing amines or polyamines offer high quality application properties such as high mechanical properties, good chemical resistance, excellent temperature properties, etc. It is a low viscosity resin based on bisphenol A. Viscosity: 700-900 mPas / 25 ° C. 3Crystallization does not occur at normal storage temperatures. The advantage of the mixture resin and the recommended hardener is its clarity.

HexPly® M21 is a high performance, very tough epoxy matrix for use in primary aerospace structures. It exhibits excellent damage tolerance, especially at high energy impacts. HexPly® M21 is a toughened epoxy resin system supplied with unidirectional or woven carbon or glass fibers. HexPly® M21 was developed as a controlled flow system to operate in environments up at 121°C (250°F).

Shanghai Sunwise Chemical OPS75 material is designed to give a high class finish with reduced pre-paint preparation and versatile out of autoclave curing. It can be supplied with carbon or glass fabric reinforcement. This resin system color is black. The standard system comprises of 1 layer of OPS75 surface ply and 1 layer of PSB75 bulk ply.

HexPly® M81 is a high performance tough epoxy matrix for use in industrial applications requiring good impact resistance and damage tolerance, such as the automotive industry. HexPly® M81 is based on the highly successful HexPly® 8552 toughened epoxy resin system, used widely around the world for the manufacture of aircraft structures. Non-aerospace customers now have the opportunity to benefit from the excellent performance of this resin system presented with reinforcements specially adapted for industrial markets.

MTFA400 resin film is designed to give enhanced toughness and higher service temperature, giving great flexibility in component manufacture. It is a toughened epoxy resin system that can be supplied with or without fabric support to meet your cost and manufacturing requirements.

AEROMARINE PRODUCTS 300/11 Epoxy Resin Adhesive – 1 Quart Kit is a high performance epoxy adhesive used in the manufacture and repair of aircraft, boats, sporting goods, and industrial products. It bonds wood, metals, fiberglass, and most hard plastics. It is not recommended for use on polyethylene, polypropylene silicone, anodized metals, or Teflon. It is also widely used for electronic potting and encapsulation applications. It is also used for bonding wood, metals, fiberglass, and most hard plastics.

HexPly® M9.6H is a hotmelt, thermosetting, low tack epoxy resin matrix, specifically designed for prepreg applications at which short cure cycles of 100°C and above are required. M9.6H can be used for manufacture of large industrial components, suitable for cure of thin and thick sections. M9.6H exhibits a long out-life at ambient conditions.

MICAM CC40 0.1 is an epoxy-glass prepreg based on a medium weave glass fabric suitable for the manufacture of tubes and low pressure moldings.