Products in Other Consumer Goods Applications: Good Thermal Stability

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

BRUGGOLEN® H164 is a synergistic mixture of sterically hindered phenolic antioxidants and phosphonates in powder form. Our phenol-based stabilizer BRUGGOLEN® H164 is reaching a long-term protection of polyamides against heat aging for technical applications such as:Non-discoloringExcellent in glass fiber reinforced or mineral-filled polyamides

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

Z/ZQ® Series are fluorescent pigments for low plateout, olefin applications. Z and ZQ® pigments are produced in a thermoplastic polyamide resin.

BDP is a halogen‐free bisphosphate flame retardant used in engineered resins, and its superiority is demonstrated in low volatility, excellent hydrolytic stability, and high thermal stability that can tolerate high processing temperature required for engineered resins. It is recommended for use in PC/ABS, mPPO, epoxy resins .

Shandong JinChangshu New Mstar Technology JCS-305 is a green, non-toxic and environmentally friendly with excellent high heat resistance, strong ability to inhibit coloring and good weather resistance. It also greatly improve the welding performance and impact resistance of the product. It has good physical processing performance, excellent precipitation resistance, and "zinc burn" resistance. The Products have passed SGS inspection.

Gichem FP02/TE Polypropylene is PP 10% talc, esthetic, good thermal stability. High injection speed.

Proxima® HPR 2128 is uniquely formulated to provide high temperature performance. Proxima® HPR 2128 shows higher stiffness (or modulus) and higher glass transition temperature compared to other resins in the Proxima® HPR 2100 series.

Silopren™ LSR 2030 is a two-component liquid silicone rubber for injection molding processes. Because of its excellent processing properties, it can be considered for use in a wide range of applications.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 2030 typically are distinguished by the following properties: High thermal stability Excellent stability and flexibility at low temperatures Excellent biocompatibility Sterilizable with ethylene oxide, steam and gamma radiation Good rubber-like properties Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily-pigmentable with LSR Color Pastes Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2030 is an excellent candidate to consider for use in the following elastomeric articles: Sealing elements O-rings Stoppers Cable accessories.

Jinan Chenxu Chemical Flame Retardant Zinc borate is an inorganic additive flame retardant, which is characterized by good thermal stability, both flame retardant and smoke suppression. It can replace antimony trioxide in some products and can also be used in conjunction with other inorganic flame retardants.

Spectabio LB30MB is biodegradable in controlled conditions. Spectabio L grades are developed for rigid injection molded applications with a moderate to thick Wallthickness.

Neoplast™ 155 FT SW B are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

Bioblend LT25B R are developed for rigid injection molded applications. The grades can be crystallized/annealed in order to have the part heat-stable at temperatures up to 110°C. Bioblend LT grades are biodegradable in controlled conditions.

TİSESTER F UNR F01 K04 HS R01 is a PBT, Flame Retardant-Halogen (Rohs Compilance), Impact Modified, Natural.

ADK STAB 1500 also called 439 is applied in ABS, PVC and also contains features such as excellent thermal and color stability.

Nanjing Glory Chemical Glory PF can be used in the brightening of PVC, polystyrene polyacrylic ester, polyester film, ABS etc.

Defend Rx PA2000 is a PEBA Antimicrobial Masterbatch, 4wt.% LDR.

EVERNOX-B110 is used in polyolefins and olefins-copolymers such as LDPE, HDPE, LLDPE, PP and EVA. It can also be used in other polymers such as engineering plastics, styrene homo and copolymers such as PBT, PET, PA, POM, PS, ABS, PUR, elastomers BR, SBR, SBS, adhesives and other organic substrates. The B-blends can be used in combination with light stabilizers of UV-absorbers and hindered amine light stabilizers.

TİSESTER® F 15D03 R01 is a PBT, 15% Glass Fiber Reinforced, Natural

Cel-Span® Process Aid 332 is a non-clear compounded product containing a high level of thermal stabilizers and CAC0₃ to provide protection of film resins during high temperature extrusion and lamination processes, thus maximizing inherent physical properties of the natural al resins. CelSpan® Process Aid 332 eliminates build up in both internal and external metal surfaces of the extrusion die, as well as reduction of wrinkles in thin gage films. This product will extend Tio₂ up to 5% without loss of opacity.

Extrudr Flex Medium Blue is a durable elastomere based on Polycaprolacton-Polyester. It was specially developed for industrial applications and is ideally suited for the production of elastic and damping components. The material is optimized for the FFF/FDM process in regards to thermal stability and better flow properties. The raw material is compliant according to the REACH- and RoHS-Standards.