Products in Luggage & Leather Goods: Plasticizer

Santicizer® 1438 is a modified alkyl aryl phosphate ester for flexible PVC products that must meet stringent flame retardancy standards. Santicizer® 1438 is specially recommended for plastisol applications where lower viscosity is combined with high fire-retardancy of the end product. Santicizer® 1438 exhibits superior flow properties and plasticizer efficiency compared to triaryl phosphate esters at equal concentrations. Santicizer® 1438 can be used at lower concentrations for similar flame spread without affecting tensile properties.

Plasticizer DOTP is an ester of 2-ethylhexanol and terephthalic acid, which is used as a commercial plasticizer with high dielectric properties, high cold resistance, reduced volatility.

Paychlor S-68 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Natro-Cel 6102-A is a naval stores-based NR, SR plasticizer, softener. Aids extrusions and processing; renders stocks tacky. Has no effect on cure rate. Prevents scorch.

Tar-Cel 30-A is a Tarene, silicon-dioxide blend plasticizer and tackifier for NR, SBR, IR, IIR, and polyisobutylenes. It reduces mill-time over liquid pine tar and gives easier, faster, more accurate weighing.

Paychlor D-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Indo-Nippon Chemical Di Octyl Phthalate (DOP) is a general-purpose plasticizer. It has good compatibility with PVC, possesses all properties required for PVC processing. It is superior in electrical performance. DOP is used as a plasticizer for PVC cables and wires, floor coverings, adhesives, leather cloth, films, calendars, perfume fixative, nitrocellulose, synthetic and natural rubber, many synthetic and natural resins, drying oils, etc., Indo-Nippon Chemical Co., Ltd. also manufactures DOP - Medical Grade with high purity, with very low free alcohol content, practically free of impurities and odor. DOP of this grade is free of any additives.

Plasticizer SC DLC-A is a diester of triethylene glycol, silicon-dioxide blend plasticizer, and softener for NR, SR's. Gives low temperature flexibility; improves processing.

Paychlor S-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

UPC Group DINP has good compatibility with PVC and high plasticizing efficiency. DINP has better performance than DOP in electrical insulation, durability, heat-resistance and low volatility. In addition, customers can produce higher volume products (like PVC film and sheet) with DINP formula.

Paychlor D-42 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

WSD Chemical Dioctyl terephthalate/DOTP is a a good main plasticizer of PVC plastics. Compared to DOP, it offer better heat , anti-freezing, not volatile,anti-taking and flexibility. Because of low volatility, can be used to produce wire and cable working in low temperature,and is widely used in 70 ° C -resisting cable (Standards of International Electrotechnical Commission) and other soft.PVC products. Besides, it also can be used in leatherette and film.as plasticizer of PE alcohol butyral, acrylonitrile-butadiene rubber, cellulose nitrate and synthetic rubber. It also can be used as coating additives,lubricant of precision instruments, lubricant additives, or softener of paper.

Plastay DINP (Di Isononyl Phthalate) is usually used with materials such as PVC for plasticization, after heating to a soft or plasticized state, to obtain elasticity, brightness for plastic, create electrical resistance, prevent cracking and make the surface smooth. Do not allow the ingress of materials that will be removed from the mold.

Natro-Cel R-A is a blend of sodium sulfonate and selected process oils on silicon dioxide. Used as an effective dry-form plasticizer and processing aid for NR, SBR, IR, and IIR. Suggested for open-roll mill mixing and used in emulsification, corrosion and wetting applications.

Natrochem DOA DLC-A is a di(2-ethylhexyl) adipate, silicon-dioxide blend plasticizer for NR, NBR, CR, and chlorinated PE. It gives good low temperature properties, excellent incorporation and easy handling.

Shandong Chuanjun Chemical Dioctyl phthalate(DOP) is one of most popular plasticizer, it has excellent performance, such as good blending capacity, high efficiency, low volatility, anti cold and hot, low offset , waterproof and anti-UV, good electrical capacity. It can be used in PVC, PE and cellulosr, such as film, cable, artificial leather, pipe, sheet material, mold plastic , or used as softener of rubber.

Paychlor S-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor D-58 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Paychlor K-45 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

UPC Group UN488 (DOTP) is a Non-P plasticizer. PVC products perform well in electrical insulation, heat-resistance, and cold-resistance.

Hairma Chemical (GZ) Diacetylepoxy Vegetable Oleic Acid Glyceride HM-828 is a new type of environmentally friendly, completely biodegradable plasticizer synthesized from vegetable oil, followed by transesterification, acetylation, and epoxidation. It is used as the main plasticizer.

Natrochem DOP DLC-A is a Di-octyl phthalate-silicon dioxide blend plasticizer for NR, SBR, IIR, IR, polyisobutylenes and chlorinated polyethylenes. Large additions may retard cure slightly. Incorporates rapidly; reduces pigment requirements in color stocks; aid filler incorporation.

WSD Chemical Dioctyl phthalate/DOP Super Grade is one of the most useful plasticizer,it shows properties of the plasticizing efficiency, low volatility, light-resistant, water-endurance, weathering resisting, good electrical functions,and fine softening effect,etc. Extensively used in processing electrical wires and cables, artificial leathers, films and molding plastics from polyvinyl chloride, vinyl chloride copolymers and cellulosic resins.

Paychlor D-52 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

UniHydro® UN899, Diisononyl cyclohexane-1,2-dicarboxylate, is a non-phthalate plasticizer. It is clear and odorless just like water and widely used in PVC products. Due to its non-benzene and non-toxic nature, it provides better safety assurances. It is especially suitable for human contact products such as medical devices, children's toys, food packaging and flooring.

Shandong Yuanli Science and Technology Diisobutyl Dibasic Ester(DBE-IB) is used as coalescing agent in polymer dispersions. Also it increases the wash and shier endurance, furthermore it is also used as solvent for printing inks, industrial cleaning applications and as plasticizer in various plastics.

Shandong Yuanli Science and Technology Dioctyl Adipate(DOA) is a typical cold resistant plasticizer of polyvinyl chloride, vinyl chloride copolymers, polystyrene, cellulose nitrate, ethyl cellulose and synthetic rubber.High plasticized efficiency. Products can be given to low-temperature flexibility and good lightfastness.Used with the DOP,DBP plasticizer for cold agricultural film, frozen food packaging film,wire and cable coating, leather, sheet metal and outdoor used etc.

Tar-Cel 14-A is a Tarene, silicon-dioxide blend plasticizer and tackifier for NR, SBR, IR, IIR, and polyisobutylenes. It reduces mill-time over liquid pine tar; gives easier, faster, and more accurate weighing.

Shandong Yuanli Science and Technology Dioctyl Maleate(DOM) is used as an internal plasticizer. It could be copolymerized with monomers like vinyl chloride. Vinyl acetate, styene, acrylic etc. These copolymers have good transparence and impact resistance, can be used in preparing coatings, films, adhesives, rubbers etc, better adjusting the molecular weight, leveling the film, reducing the cost.

Vatan Plastik San. Tic. AS Dioctyl Adipate (DOA) is a plasticizer with superior wetting property of the product can be observed especially in the productions where less plasticizer is used such as skin layers.

Paychlor S-62 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Shandong Yuanli Science and Technology Diisobutyl Adipate(DIBA) can be used as solvent for coating,resin and other production areas. It can also be used as plasticizer for cellulose, vinyl resin and other fields.

Paychlor D-55 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.

Shandong Chuanjun Chemical Dipropylene glycol dibenzoate(DPGDE)) is haplotype and Strong solvent based plasticizer.have light ill-smelling.It can be compatible with lots of polymer,very faster dissolve vinyl resins. can reduce the melting temperature and reduce production time. This product is resistant to mineral oil extract and have high flash point no peculiar odor. no harm of touch, have a good compatibility with resins. It can retain the foam structure of tiny when produce opening vinyl foam. Foam products very soft, pore uniformity similar to soft leather. It be made into vinyl flooring can not be infiltration and pollution by asphalt.

Shandong Chuanjun Chemical DOS for excellent cold-plasticizers has plasticized high efficiency, low volatile, it has an excellent cold resistance, have better heat resistance, electrical insulation and lightfastness, applicable to PVC, chlorine Ethylene copolymer, Glauber cellulose ester, ethyl cellulose and synthetic rubber, and other resins. Particularly applicable to production of cold wire and cable materials, leather, film, sheet metal, such as sheet. Chang and phthalate esters at the same time. As a variety of low-temperature synthetic rubber used plasticizers, rubber vulcanization of no effect.

Paychlor K-40 are used in blends with PAYAL’S PAYFLEX series to optimize cost, viscosity and processability. An extensive range of chlorinated paraffin grades are available ranging from chlorine content 0.36 to 0.65 and specific gravity 1.1 to 1.50.