Products in Footwear: Good Processability

209 Products found in Footwear

Braskem AmericaSVT2180

Polymer Name:Ethylene Vinyl Acetate Copolymer (EVA)
Processing Methods:Compression Molding, Injection Molding
Additives Included:Antioxidant
End Uses:Foams, Toys, Unisole, Sporting Goods, Shoe Sole, Plates, Midsole
Melt Flow Index:2.1 - 2.1 g/10 min

Braskem America SVT2180 is a copolymer of renewable ethylene with Vinyl Acetate (EVA) mainly used for the production of crosslinked foam sheets and other parts. It is a product with easy processability and high compatibility with mineral fillers, thermoplastics, and elastomeric resins. Other important characteristics are elasticity, flexibility, excellent stress cracking resistance (ESCR), chemical resistance, and low temperature strength. The exclusive morphologic characteristics give outstanding crosslinkability. The components produced with SVT2180 have the following properties: low weight, resistance to deformation, low shrinkage, high capacity of shrinkage, and color retention. The minimum biobased carbon content of this grade is 80%, determined according to ASTM D6866.

For more information regarding REACH, please visit Braskem's site

EvonikULTRASIL® VN 3 GR

Functions:Reinforcement
Chemical Family:Silica
Features:Dust-Free, High Hardness, High Dispersibility, Tear Resistance, High Tensile Strength, Good Processability, Excellent Transparency Properties, Good Abrasion Resistance

ULTRASIL® VN 3 GR has a specific N2 surface area of approximately 180m²/g and is utilized in nearly all areas of the rubber industry. It is available in both powdered and granulated forms. ULTRASIL® VN 3 GR offers a high reinforcing potential in combination with a high level of transparency in the finished rubber product, such as in shoe soles. Furthermore, ULTRASIL® VN 3 GR is widely used in different bonding systems.

EvonikULTRASIL® VN 3

Functions:Reinforcement
Chemical Family:Silica
Features:High Hardness, High Dispersibility, Tear Resistance, High Tensile Strength, Good Processability, Excellent Transparency Properties, Good Abrasion Resistance

ULTRASIL® VN 3 has a specific N2 surface area of approximately 180m²/g and is utilized in nearly all areas of the rubber industry. It is available in both powdered and granulated forms. ULTRASIL® VN 3 offers a high reinforcing potential in combination with a high level of transparency in the finished rubber product, such as in shoe soles. Furthermore, ULTRASIL® VN 3 is widely used in different bonding systems.

EvonikULTRASIL® VN 2

Functions:Reinforcement
Chemical Family:Silica
Features:Good Abrasion Resistance, Tear Resistance, High Hardness, High Tensile Strength, Good Processability

ULTRASIL® VN 2 is primarily used at high filler loadings in PCT (passenger car tire) tread compounds without any loss in processing behavior. This silica is particularly well-suited for use in combination with bifunctional organosilanes, which help to optimize wet and winter properties. Additionally, high static moduli are observed with and without additional organosilanes. This is why ULTRASIL® VN 2 is also widely used in other mechanical rubber goods. It is available in both powder and granulated silica forms.

EvonikULTRASIL® VN 2 GR

Functions:Reinforcement
Chemical Family:Silica
Features:High Hardness, Good Mechanical Properties, Tear Resistance, High Tensile Strength, Good Processability, Excellent Water Swell Resistance, Good Abrasion Resistance

ULTRASIL® VN 2 GR is primarily used at high filler loadings in PCT (passenger car tire) tread compounds without any loss in processing behavior. This silica is particularly well-suited for use in combination with bifunctional organosilanes, which help to optimize wet and winter properties. Additionally, high static moduli are observed with and without additional organosilanes. This is why ULTRASIL® VN 2 GR is also widely used in other mechanical rubber goods. It is available in both powder and granulated silica forms.

Aegis® PIR-H55ZI banner

AdvanSixAegis® PIR-H55ZI

Polymer Name:Polyamide 6 (PA 6)
Labeling Claims:Recycled, Contains PIR Resin, Sustainable
Processing Methods:Extrusion
Density:1130.0 - 1130.0 kg/m³

Aegis® PIR-H55ZI resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H55ZI, its standard, non-recycled counterpart. Aegis® PIR-H55ZI is an unterminated, medium viscosity, nylon 6 homopolymer well-suited for monfilament and multifilament applications as well as carpet fiber.

NY-FLEX® CT 172 E banner

Nylon Corporation of America (NYCOA)NY-FLEX® CT 172 E

Flexural Modulus:825.0 - 825.0 MPa

NY-FLEX® materials are a class of engineered thermoplastic elastomers (E-TPE) and are block copolymers of polyamide and polyether segments. The polyamide block is the hard segment and the polyether block is the soft, flexible segment.

NY-FLEX® CT 155 E banner

Nylon Corporation of America (NYCOA)NY-FLEX® CT 155 E

Flexural Modulus:145.0 - 145.0 MPa

NY-FLEX® materials are a class of engineered thermoplastic elastomers (E-TPE) and are block copolymers of polyamide and polyether segments. The polyamide block is the hard segment and the polyether block is the soft, flexible segment.

NY-FLEX® CT 164 E banner

Nylon Corporation of America (NYCOA)NY-FLEX® CT 164 E

Flexural Modulus:360.0 - 360.0 MPa

NY-FLEX® materials are a class of engineered thermoplastic elastomers (E-TPE) and are block copolymers of polyamide and polyether segments. The polyamide block is the hard segment and the polyether block is the soft, flexible segment.

NY-FLEX® 140 E banner

Nylon Corporation of America (NYCOA)NY-FLEX® 140 E

Flexural Modulus:79.0 - 79.0 MPa

NY-FLEX® materials are a class of engineered thermoplastic elastomers (E-TPE) and are block copolymers of polyamide and polyether segments. The polyamide block is the hard segment and the polyether block is the soft, flexible segment.

XECARB® ST 2-C20 banner

XeniaXECARB® ST 2-C20

Polymer Name:Polyamide 6 (PA 6)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® ST 2-C20 is a 20% carbon fiber reinforced PA66

XEBRID™ 21-C10-G10 banner

XeniaXEBRID™ 21-C10-G10

Polymer Name:Polyamide 12 (PA 12)
Chemical Family:Polyamides
Reinforcement Material:Glass Fibers, Carbon Fibers
Fillers Included:Glass Fiber, Carbon Fiber
Processing Methods:Injection Molding

XEBRID™ 21-C10-G10 is a 10% carbon fiber + 10% glass fiber reinforced PA12

Terratek® FX1515 banner

Green Dot Bioplastics IncTerratek® FX1515

Polymer Name:Thermoplastic Elastomer (unspecified)
Labeling Claims:Bio-based, Plant-Based, Biodegradable, Sustainable, Environmentally Friendly
Processing Methods:Injection Molding
Density:1220.0 - 1220.0 kg/m³

Terratek® FX1515 is a unique elastomeric bioplastic with a diverse range of potential applications.

XeniaXECARB® 1-C20

Polymer Name:Polyamide 66 (PA 66)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 1-C20 is a 20% carbon fiber reinforced PA66

XeniaXECARB® 21-C10-AE

Polymer Name:Polyamide 12 (PA 12)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 21-C10-AE is a 10% carbon fiber reinforced PA12

FLOWAX R 60 banner

20 MicronsFLOWAX R 60

Functions:Wetting Agent, Dispersant
Compatible Polymers & Resins:Ethylene Vinyl Acetate (EVA)
End Uses:Footwear

Flowax R 60 is a specialty hybrid modified wax and process additive for natural and synthetic rubber providing homogeneity in mixing of rubber compounds and better dispersion of pigment and filler in rubber mix . They improve scorch safety, cure rate and mechanical properties (tensile strength, elongation, hardness) of rubber compound . They also provide excellent weather resistance, UV resistance & ozone resistance.

XeniaXECARB® 12-C40-HT

Polymer Name:Polyphthalamide (PPA)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 12-C40-HT is a 40% carbon fiber reinforced PPA

Millathane® 55M (Premilled) banner

TSE Industries Inc.Millathane® 55M (Premilled)

Polymer Name:Thermoplastic Polyurethane (Polyether based)
End Uses:Wheels, Footwear, Belts & Belt Repair, Rubber Roller
Features:Low Viscosity, Good Abrasion Resistance, Excellent Mechanical Strength, Water Resistant, Good Processability, High Hardness, Oil Resistant

Millathane® 55M (Premilled) is a sulfur, peroxide or isocyanate curable polyether millable polyurethane rubber used for the production of rubber covered rollers, belting and other molded articles.

AL2CHEM SPECIALTIES AL 69C Silane/Carbon Black banner

AL2CHEM SPECIALTIESAL2CHEM SPECIALTIES AL 69C Silane/Carbon Black

Chemical Name:Bis[3- (triethoxysilyl) propyl] tetrasulfide
Functions:Reinforcement, Crosslinking Agent
Chemical Family:Silanes, Carbon Blacks

AL 69C is a 50/50 mixture of AL69 with N330 carbon black to form a free flowing granule that is easy to use and at the same time utilize the properties of the AL 69 silane. AL 69 is a bifunctional polysulfidic organosilane for the rubber industry. It is used to improve the reinforcing capability of fillers with silanol group on their surface (e.g., silicas, silicates, clay, etc.), and also as an integral part of curing systems to improve crosslinking network properties.

XeniaXECARB® 17-C30-P3

Polymer Name:Polyether Block Amide (PEBA)
Processing Methods:Injection Molding
End Uses:Industrial Applications, Mountaineering Boots, Structural Parts, Gears
Features:Electrically Conductive, Good Mechanical Properties, Good Processability, Low Density
Flexural Modulus:8500.0 - 8500.0 MPa

XECARB® 17-C30-P3 is a 30% carbon fiber reinforced PEBA

Synsil 6 banner

20 MicronsSynsil 6

Functions:Filler
Compatible Polymers & Resins:Silicones, Ethylene Vinyl Acetate (EVA)
Features:Scorch Resistant, High Strength, Abrasion Resistant, Heat Aging Resistant, Good Toughness, Good Dispersion, High Durability, Heat Resistance, High Surface Area, Good Processability
End Uses:Tires, Footwear, Belts & Belt Repair, Hoses, Tubes, Automotive Components
Synonyms:Silica, SiO2

Synsil 6 is a precipitated and modified amorphous silica product uniquely developed to provide rapid incorporation in rubber matrix & excellent dispersion behavior. They offer high filler loading with favorable rheological and mechanical properties and excellent calendaring properties. It imparts a superior matting effect & surface appearance, low tension & compression set with good aging properties and provides superior abrasion resistance.

XECARB® 6-C30-D11 banner

XeniaXECARB® 6-C30-D11

Polymer Name:Thermoplastic Polyurethane (Polyether based)
Processing Methods:Injection Molding
End Uses:Mountaineering Boots, Structural Parts
Density:1310.0 - 1310.0 kg/m³
Flexural Modulus:12000.0 - 12000.0 MPa
Strain at Break:4.2 - 4.2 %

XECARB® 6-C30-D11 is a 30% carbon fiber-reinforced ether-based TPU

XEBRID™ 21-C10-G20 banner

XeniaXEBRID™ 21-C10-G20

Polymer Name:Polyamide 12 (PA 12)
Chemical Family:Polyamides
Reinforcement Material:Glass Fibers, Carbon Fibers
Fillers Included:Glass Fiber, Carbon Fiber
Processing Methods:Injection Molding

XEBRID™ 21-C10-G20 is a 10% carbon fiber + 20% glass fiber reinforced PA12

XEBRID™ 1-C10-G10 banner

XeniaXEBRID™ 1-C10-G10

Polymer Name:Polyamide 66 (PA 66)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers, Glass Fibers
Fillers Included:Glass Fiber, Carbon Fiber
Processing Methods:Injection Molding

XEBRID™ 1-C10-G10 is a 10% carbon fiber + 10% glass fiber reinforced PA66

XECARB® ST 1-C30 banner

XeniaXECARB® ST 1-C30

Polymer Name:Polyamide 66 (PA 66)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® ST 1-C30 is a 30% carbon fiber reinforced PA66

XEBRID™ 29-C30-G20 banner

XeniaXEBRID™ 29-C30-G20

Polymer Name:Polyamide 410 (PA 410)
Chemical Family:Polyamides
Reinforcement Material:Glass Fibers, Carbon Fibers
Fillers Included:Glass Fiber, Carbon Fiber
Processing Methods:Injection Molding

XEBRID™ 29-C30-G20 is a 30% carbon fiber + 20% glass fiber reinforced PA4.10

XECARB® 1-C10 banner

XeniaXECARB® 1-C10

Polymer Name:Polyamide 66 (PA 66)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 1-C10 is a 10% carbon fiber reinforced PA66

Terratek® FX2200 banner

Green Dot Bioplastics IncTerratek® FX2200

Polymer Name:Thermoplastic Elastomer (unspecified)
Labeling Claims:Environmentally Friendly, Bio-based, Plant-Based, Biodegradable, Sustainable
Processing Methods:Injection Molding, Profile Extrusion, Extrusion
Density:1230.0 - 1230.0 kg/m³

Terratek® FX2200 is a unique elastomeric bioplastic with a diverse range of potential applications. This material is suitable for injection molding, profile extrusion, and sheet extrusion.

20 Microns SR Filler banner

20 Microns20 Microns SR Filler

Functions:Filler
Compatible Polymers & Resins:Silicones, Ethylene Vinyl Acetate (EVA)
Features:Scorch Resistant, Heat Aging Resistant, Good Toughness, High Durability, High Surface Area, Good Processability
End Uses:Tires, Footwear, Belts & Belt Repair, Hoses, Tubes, Automotive Components
Synonyms:Silica, SiO2

SR Filler is a functional additive. Its efficiency results from the unique irregular particle shapes, tight particle size distribution, bright & white color, and refractive index similar to the polyolefin resin.

XeniaXECARB® 1-C30

Polymer Name:Polyamide 66 (PA 66)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 1-C30 is a 30% carbon fiber-reinforced PA66

XeniaXECARB® 17-C30-P2

Polymer Name:Polyether Block Amide (PEBA)
Processing Methods:Injection Molding
End Uses:Industrial Applications, Mountaineering Boots, Structural Parts, Gears
Features:Electrically Conductive, Good Mechanical Properties, Good Processability, Low Density
Flexural Modulus:4500.0 - 4500.0 MPa

XECARB® 17-C30-P2 is a 30% carbon fiber reinforced PEBA

Terratek® GDH-B1FA banner

Green Dot Bioplastics IncTerratek® GDH-B1FA

Polymer Name:Thermoplastic Elastomer (unspecified)
Labeling Claims:Environmentally Friendly, Bio-based, Plant-Based, Biodegradable, Sustainable
Processing Methods:Injection Molding, Profile Extrusion, Blown Film Extrusion, Film Extrusion, Extrusion, Blow Molding
Density:1230.0 - 1230.0 kg/m³
Tear Strength:57.0 - 57.0 kN/m

XECARB® ST 30-C30 banner

XeniaXECARB® ST 30-C30

Polymer Name:Polyamide 610 (PA 610)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® ST 30-C30 is a 30% carbon fiber reinforced PA6.10

Millathane® E34 banner

TSE Industries Inc.Millathane® E34

Polymer Name:Thermoplastic Polyurethane (Polyether based)
End Uses:Rubber Roller, Gaskets, Footwear, Belts & Belt Repair
Features:High Resilience, Low Temperature Flexibility, Ozone Resistant, High Strength, Good Abrasion Resistance, Good Processability, High Hydrolytic Stability, Fuel Resistant, Oil Resistant

Millathane® E34 is a sulfur or peroxide curable polyether millable polyurethane rubber used for the production of parts in applications including rollers, seals, footwear, belting, and gaskets. It gives excellent strength and abrasion resistance properties, especially in sulfur cured compounds, and has very good processing characteristics.

XeniaXECARB® 40-C30-M31

Polymer Name:Polycarbonate (PC)
Chemical Family:Polycarbonate (PC)
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 40-C30-M31 is a 30% carbon fiber reinforced PC

XeniaXECARB® 1-C40

Polymer Name:Polyamide 66 (PA 66)
Chemical Family:Polyamides
Reinforcement Material:Carbon Fibers
Fillers Included:Carbon Fiber
Processing Methods:Injection Molding

XECARB® 1-C40 is a 40% carbon fiber reinforced PA66

Show

of 209 results