Products in Footwear: General Purpose

Super Asia Polyblend 65AN is an thermoplastic elastomer ( TPE/ TPR) compounds.

Mercure MBS is delayed action sulphenamide alone or in combination with small quantities of booster accelerator is widely used in NR, SBR, NR-BR/SBR blends, NBR and other synthetic rubber based compounds used for the manufacture of auto tires, tire retreading materials, conveyor and power transmission beltings, rubber goods with thick cross sections, intricately shaped rubber goods, rubber footwear, injection molded goods, cables and other miscellaneous molded and extruded rubber products.

Astlett Rubber Inc SBR 1507 High Grade is a general-purpose rubber. It can be used in the production of tires, tubes, conveyor belts, cable jackets, footwear, and various technical articles.

Kemai Chemical ANTIOXIDANT RD (TMQ) is particular excellent kinds of general-purpose ammonia anti-aging agent. It particular suit to full-steel, semi-steel radial tire and it apply to many kings of the tires, rubber tube, gummed tape, rubber overshoes and general industrial rubber products and also suits to emulsion products.

Astlett Rubber Inc SBR 1502 is a cold polymerized, 23.5% styrene SBR polymer made with a mixed-acid emulsifier, non-staining stabilizer, and salt-acid coagulation. SBR 1502 exhibits excellent tensile strength, abrasion resistance, flexibility, and recovery properties that are characteristic of “cold” rubbers. This non-staining, non-discoloring polymer offers a complete range of bright, colorful stocks capable of satisfying requirements in a variety of products.

MAZPOUND FS is processed by injection molding method for the purpose of footwears shoe soles, sandals, and slipper straps.

Henan Kailun Chemical RD (TMQ) is pale yellow to amber thin powder . It is nontoxic, not soluble in water, soluble in benzene, chloroform, acetone and carbon disulphide. It has Micro-soluble petroleum hydrocarbons.

MAZPOUND FW is processed by injection molding method for the purpose of footwears shoe soles, sandals and slipper straps.

ISOTHANE 1065A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

Kemai Chemical ACCELERATOR DM (MBTS) is a general-purpose accelerating agent of the natural rubber, the synthetic rubber and the regenerative rubber. It major used to produce tires, the inner tube of a tire, gummed tape, rubber overshoes, and general industrial products.

Hangzhou Hi-Tech Fine Chemical AC4000 is specially suitable for PVC extrusion and secondary high foam rubber and plastic free mode of foam and PEF; used in EVA MD injection, the size of the mold pressing, PE molded of PVC molding, coating and rubber molded foam, and rubbermolding and extrusion foaming. widely Use of high-grade EVA the MD shoe material, NBR + PVC insulation materials, seals and obturator leather.

Super Asia Polyblend 85AN is an thermoplastic elastomer ( TPE/ TPR) compounds.

ISOTHANE 1080A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

JSC Sterlitamak Petrochemical Plant SKS-30 ARK / SBR-1500 is a styrene and butadiene copolymer obtained by emulsification method with the use of mixture of rosin and fatty acids soaps. It is stabilized by non-staining antioxidant.

Plaox DODPA is a General purpose antioxidant for all elastomers; specially purified for many nonstaining and moderate discoloring applications such as cables, footware, flooring, gaskets, bicycle tubes and tires.

MAZPOUND NFW is processed by injection molding method for the purpose of footwears shoe soles, sandals and slipper straps.

UPC Group DINP has good compatibility with PVC and high plasticizing efficiency. DINP has better performance than DOP in electrical insulation, durability, heat-resistance and low volatility. In addition, customers can produce higher volume products (like PVC film and sheet) with DINP formula.

Fainplast Compounds PVC GSK 4810 is comprised of Polyvinyl Chloride. It is commonly used for a variety of applications. .

Nancar® NBR 1042 is a medium high acrylonitrile butadiene copolymer with good oil resistance. It is polymerized at low temperature and contains sufficient antioxidant for normal aging conditions. It has high Mooney viscosity and provides compounds with higher strength and modulus..

Super Asia Polyblend 25AN is an thermoplastic elastomer ( TPE/ TPR) compounds.

Characteristics: Low melt flow rate Homopolymer polypropylene with excellent mechanical properties and color, excellent gage control and high melt strength. Recommended for: Extrusion of strapping, sheets, Cartonplast, extrusion thermoforming, extrusion blow molding of bottles, injection molding of heels, extrusion and injection molding general purpose applications.

Silopren™ LSR 2003 liquid silicone rubber is a two-component product formulated for use in liquid injection molding to produce elastomeric parts where low-durometer is a key requirement. LSR2003 elastomer is clear, but easily pigmentable with Momentive Performance Materials masterbatch colors.LSR2003 elastomer offers a convenient 1:1 mix ratio and releases easily from molds. Cure time is rapid, generally 10 to 40 seconds at 150°C (302°F) - 204°C (400°F), depending on part size, configuration, and molding temperature.Key Features and BenefitsLSR2003 liquid silicone rubber is distinguished by the following properties: Low-Durometer Non-Tackiness Sensory Characteristics (Added Cushioning) Rapid molding cycle times - > 20-60 seconds Convenient 1:1 Mix Ratio Potential ApplicationsThe combination of low-durometer and non-tackiness allows the product to be used in consumer goods applications such as: Corn Pads Heel Inserts Shoe Insole Vibration dampers.

ISOTHANE 1085A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

Super Asia Polyblend 95AN is an thermoplastic elastomer ( TPE/ TPR) compounds.

Super Asia Polyblend 75AN is an thermoplastic elastomer ( TPE/ TPR) compounds.

Super Asia Polyblend 30AN is an thermoplastic elastomer ( TPE/ TPR) compounds.

ISOTHANE 1075A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

Shandong Fine Chemical Technology MBT is a general-purpose accelerator that is widely used in various rubbers. It is a medium and super fast vulcanization accelerator for natural rubber and general synthetic rubber. It has a plasticizing effect on natural rubber. It can be used alone or in combination with other additives. Mainly used in the manufacture of tires, hoses, rubber shoes, tapes, cables, etc. The bitter taste is not suitable for the manufacture of rubber products in contact with food.

MAZPOUND RFW is processed by injection molding method for the purpose of footwears shoe soles, sandals and slipper straps.

EKFLEX 882 is a general-purpose, non-phthalate plasticizer based on dioctyl cyclohexanoate (DOCH), featuring high performance and versatility in applications and designed to meet the most varied of domestic and international market needs and requirements in PVC and plastisol compound formulations. Delivering excellent performance, this plasticizer is a direct alternative for replacing phthalate plasticizes.

IR2200 is a general purpose synthetic rubber having almost the same molecular structure as natural rubber. When compared with natural rubber, it dose not contain the natural non-rubber components such as proteins and It has uniform quality, excellent hue, and no contamination. It also has the characteristic of enabling the shortening of mastication and mixing time

ISOTHANE 1070A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.

Characteristics: Low melt flow rate Homopolymer polypropylene with excellent mechanical properties and color, excellent gage control and high melt strength. Recommended for: Extrusion of strapping, sheets, Cartonplast, extrusion thermoforming, extrusion blow molding of bottles, injection molding of heels, extrusion and injection molding general purpose applications.

Super Asia Polyblend 90AN is an thermoplastic elastomer ( TPE/ TPR) compounds.

ISOTHANE 1090A are poly(adipate)ester based thermoplastic polyurethanes, thermoforming TPU. They exhibit excellent toughness, abrasive resistance, and solvent resistance. These products can be injection molded, blow molded, and extruded.