Products in Consumer Goods: Good Thermal Stability

Flontech PTFE FT-GR15-1 contains features such as thermal expansion 10% greater than that of metallic materials, low abrasion resistance, starting from a certain load level it becomes permanently deformed due to cold flow, low thermal and electrical conductivity.

Shandong JinChangshu New Mstar Technology DL-008B is a non-toxic and environmentally friendly, high heat resistance, high insulation with good weather resistance. It also has vulcanization resistance that ordinary stabilizers can't reach, and has the performance of suppressing patina. It complies with ROHS standard production and national environmental protection requirements, and is an ideal substitute product for the national lead ban.

Description Perlast® G75B offers a unique blend of excellent chemical resistance, mechanical properties and high temperature stability, simultaneously extending the operating limits in all three aspects.Perlast® G75B has been specially formulated to provide increased acid resistance by eliminating fillers that are prone to acid attack and optimizing the polymer structure. In addition, this perfluoroelastomer has low permeability and as a result, it is less prone to swelling, leading to extended in-service performance in, for example, valves, pumps and mechanical seals.A high modulus makes Perlast® G75B resistant to extrusion and ideal for use in medium-high pressure applications. In addition, the low cumulative compression set provides a high mean-time between maintenance cycles in hot chemically aggressive environments.Perlast® G75B is suitable for both dynamic and static applications and can be fully molded into O-rings (any size up to 2m/6.5ft internal diameter) and custom shapes.Key Attributes Excellent chemical resistance to a wide range of chemicals Exceptional acid and amine resistance Superior mechanical properties Long-term sealing efficiency at high temperature Extremely low out-gassing properties Good steam resistance (ASME BPE 2000) Less than 2% swell in MIL-L-23699C jet oil after 336 hours at 200°C Typical Applications Aerospace Chemical Processing Diesel Semiconductor Oil & Gas

Brown 2096 is used in appliances, electrics & electronics , consumer goods & packaging.

fluteck™ P1500 PTFE Premium Grade is Virgin PTFE for Ram Extrusion, Compression and Isostatic molding

Yparex® 9403 M is a family of maleic-anhydride-(MAH)-functionalised polyolefins. For each of its many application areas Yparex® has suitable grades. The grades are characterized by density and melt flow index, melting temperature and the level of functional groups. Functionality for the varying application range is also obtained by using a large array of different base polymers and production technologies. The materials are produced under the highest quality standards allowing no residual unbonded maleic anhydride in the final product.

Dalian Lonsin New Materials LS1802 is microcrystalline wax.

Wellamid® 6000 GV 35 HWCP by CP-Polymer Technik is comprised of Polyamide 6 and Thermoplastic (unspecified). It is commonly used

Gillcore® HD is a meta-aramid fiber reinforced honeycomb which is coated with heat resistant phenolic resin. Gillcore® HD provides a wide range of honeycomb types, including different cell sizes, cell geometries, paper thicknesses and densities, for commercial and aerospace defense applications.

Toray Amilan® CM1026 is a Polyamide 6 (Nylon 6) product. It is available in Asia Pacific, Europe, or North America. Typical application includes Automotive. Characteristics includes flame rated, heat resistant and medium viscosity.

CP-Polymer Technik Wellamid® 6600-PA66-GV 20 HWV0CP is a Polyamide 66 (PA 66) polymer. It can be processed using injection molding. Suitable for E&E (Electrical & Electronics) and automotive industry.

Havel Composites CZ sro Epoxy resin LH 289 with an extremely low viscosity. When curing offers high-quality application properties such as optimum mechanical properties, good chemical resistance, excellent thermal properties etc. It is suitable for the production of composites as well as a top coat of artificial stone. At normal storage temperatures, crystallize does not occur.

GRANOC YARN YS-90A is used in ultra high modulus and high thermal conductivity

TİSESTER F UNR F01 K02 HS R01 is a PBT, Flame Retardant-Halogen (Rohs Compilance), Heat Stabilized, Natural.

HIPS (High Impact Polystyrene ) 666 is High Impact Injection Grade, High Impact Strength and it is used in PC peripheral appliances, electrical appliances, stationery.

Carbkid® Fiber VE SMC is a polymer composite material reinforced with carbon fiber, which consists of a thermoset resin (usually vinylester or epoxy) and different additives that allow to obtain certain specific characteristics and improve the behavior of the material during the molding process of the final product. While the standard SMC is reinforced with glass fibers, the CSMC is reinforced with cut fibers or carbon fabrics. CSMC materials combine the low-weight characteristics offered by carbon composites in conjunction with a widespread forming process, such as compression molding, which allows for short manufacturing cycles and is therefore suitable for industrial applications in large series.

Exac PFA is a Perfluoroalkoxy (PFA) product. It is available in North America. Applications of Exac PFA include engineering/industrial parts, electrical/electronic applications, aerospace, automotive and medical/healthcare.Characteristics include: Flame Rated Chemical Resistant Heat Resistant Weather Resistant

Nylacast Impact is specifically designed for applications that require high impact resistance and noise reduction capabilities. It works effectively in applications where there is high stress. It also has good mechanical, thermal and chemical resistance properties. The impact grade is ideally suited to applications such as support rollers for the aggregate processing industry, dollies used in conjunction with pile drivers and crane feet pads as well as roller coaster wheels in relation to noise reduction.

E-glass 106 is also known as electrical glass—is the standard glass composition used for most glass fibers. It is made from the oxides of silicon, aluminum, calcium, magnesium, and boron.

GEHR PPS® 40 GF is a variant of PPS modified with 40 % glass fibers. Due to the high glass fiber content, strength ranges comparable to light metals can be achieved. This material owes its significantly increased dimensional stability to its very low coefficient of linear expansion.

Silopren™ LSR 2070 is a standard two-component liquid silicone rubber for injection molding processes. Because of its excellent processing properties it can be considered for use in a wide range of applications.Key Features and BenefitsVulcanizates consisting of Silopren™ LSR 2070 typically are distinguished by the following properties: High thermal stability Excellent stability and flexibility at low temperatures Excellent biocompatibility Sterilizable with ethylene oxide, steam and gamma radiation Good rubber-like properties Long service life at dynamic stress High stability to ozone and ultraviolet light Outstanding resistance to aging Excellent dielectric behavior over a wide range of temperatures Not readily combustible, does not melt or drip Easily-pigmentable with LSR Color Pastes Potential ApplicationsBecause of its outstanding properties, Silopren™ LSR 2070 is an excellent candidate to consider for use in the following elastomeric articles: Sealing elements O-rings Stoppers Keypads Bellows Vibration dampers Pressure cooker parts ... and many more.

Reagens SLX/781 is used in calendering of semi-rigid and plasticized PVC. It imparts excellent initial color, good transparency and a good long term heat stability with most types of PVC resins, showing no plate-out tendency. The addition of an epoxy compound, such as Reaflex EP/6 (about 2-4 phr), improves the long term heat stability and the weathering performance.

Neoplast™ 173 C are strong, flexible materials providing excellent sealing, esthetics, long term performance compared to thermoset rubbers and PVCs.

FORMPOLY® GPP10 offers of a range grades from unfilled, glass fiber reinforced, to flame Polypropylene mineral reinforced retardant including FORMPOLY GPP10, which is heat stabilized, lubricated, glass reinforced PP with excellent mechanical/ /thermal properties and reduced shrinkage.

COMFIL offer fabrics of the produced thermoplastic composite yarns.

CP-Polymer Technik Wellamid® 6600 GV 20 HWCP is a Polyamide 66 (PA 66) polymer. It can be processed using injection molding. Suitable for E&E (Electrical & Electronics) and automotive industry.

Next Polymers Next PC CX-02GY is PC unfilled gray compound (RAL-7035).

Depol in 900 TG Fire Retardant Gelcoat is a high quality pre-accelerated fire retardant gelcoat on the basis of the resin, produced with chlorendic anhydride. The variant for hand lay-up as well as for spray application is commercially available.

Dioki GPPS® 605 is transparent general purpose polystyrene exhibiting good melt flow properties. Dioki GPPS® 605 is basically intended for extrusion, foam extrusion and injection molding of thick-walled molded products. This polystyrene grade is characterized by good thermal and dimensional stability of molded products.

Tiangang® HS-200 (Light Stabilizer 2020) is an imported replacement product for high-end polymeric light stabilizer 2020.

SolaTuf® AC1 is used in the following processes: printing, die-cutting, thermoforming, hot stamping, insert molding, laminating, and coating.

TİSESTER F 25D03 F01 K02 HS R01 is a PBT, 25% Glass Fiber Reinforced, Flame Retardant-Halogen (Rohs Compliance), Heat Stabilized, Natural.

Makrostab® Thermo 1561 are masterbatches containing antioxidants intended to improve the processing, long-term heat or other, special, thermooxidative stability of the polymer. The MAKROSTAB® masterbatches represent a simple and efficient solution to the additional stabilization of polymer at its last stage of conversion. They are successfully used in all processing technologies, e.g. injection and blow molding, tape extrusion or fiber production.

Sollamid AC 9010 features low viscosity Polyamide, intended for injection molding.

Resinoid 1360HR is a glass reinforced, two-step phenolic molding compound. It exhibits outstanding impact strength, electrical and thermal properties. It is particularly suitable for high temperature and strength applications. This material comes in pelletized from and is suitable for transfer or compression molding. It can be preformed on automatic equipment.

FR F is a Flame retardant grade with Improved flowability.