Products in Consumer Goods: Polypropylenes (PP)

Applied Bioplastics PPB222MF is PP compound reinforced with 22% wood fiber with antistatic properties having medium MFI and balanced stiffness and impact properties. This grade is intended to use for a wide range of injection molding applications including general purpose house hold items, closures and lids and toys.

PROPOLDER™ FPP4060 is polypropylene (PP) homopolymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ homopolymer PP materials are pure polypropylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements.

SAHARA C 700HT is a nucleated impact copolymer used for injection molding and compounding applications. It exhibits good impact to stiffness balance combined with high fluidity. Sahara C 700 HTX is typically used in opaque containers, housewares, toys and in thin wall containers for food packaging (e.g. Margarine tubs, Yoghurt pots) and compounding applications.

THPP60-FN is a Polypropylene (PP) honeycomb cores which are a strong but flexible lightweight material that provides optimal mechanical performance in composite sandwich structures.

Tasnee PP H1030 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 3 g/10min. Tasnee PP H1030 is designed for stretch tape from water bath and chill roll, offering low water-carry-over and low shrinkage. Its good mechanical properties and compliance to food contact regulations allow it to be used in various applications.

The SPP Series consists of polypropylene powders in a controlled range of particle sizes. These products are stir-in powders that can be easily dispersed under high-speed mixing in solvent, UV, or water-based inks & coatings.

SAHARA C 1000HT is a nucleated impact copolymer with antistatic additivities used for injection molding applications. It exhibits an outstanding balance of mechanical properties combined with a high fluidity. Sahara C 1000 HT is used in housewares and in thin-walled containers for food packaging (e.g. margarine tubs, yoghurt pots, etc.) and compounding applications. This grade is not intended for medical and pharmaceutical applications.

PROPOLDER™ FPP4020 is polypropylene (PP) homopolymer in fine particle powder form. Unlike waxes, these higher molecular weight materials exhibit high toughness. PROPOLDER™ homopolymer PP materials are pure polypropylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements.

TALENE M2025 N02 is a 20% mineral filled polypropylene homopolymer with good flow and high stiffness. It has good long term heat aging resistance. It is not intended for medical, pharmaceutical and/or drinking water applications.

SAHARA C 160HM is a nucleated heterophasic copolymer, suitable for injection molding applications, and contains an anti-static agent. It exhibits a high stiffness combined with a medium fluidity. Sahara C 160HM is extensively used in housewares, furniture, cylindrical containers and crate. This grade is not intended for medical and pharmaceutical applications.

SAHARA H 250FF is a homopolymer suitable for extrusion applications for textile market. This grade is formulated to have gas fading resistance. SAHARA H 250FF is used for production of continuous filaments (CF), Bulk continuous filaments (BCF) and tape fibers.

XECARB® HM 11-C20-HP is a 20% carbon fiber reinforced PP

UL 94 V0, 25% glass fiber reinforced, chemically bonded, halogen free, high rigidity and thermal resistance, RoHS.

Tasnee PP H2250 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 25 g/10min. Tasnee PP H2250 is a medium narrow molecular weight distribution with anti-gas fading stabilization. It is intended for the extrusion of fine fibers with the spunbond technology for non-woven applications. It is also suitable for the extrusion of bulk continuous filament (BCF) for carpet pile and continuous filament (CF) yarns.

TALENE M4012 N02 is a 40% mineral filled polypropylene homopolymer with good processability. The product has good antistatic properties & thermal aging resistance. The product is available in natural color. It is not intended for medical, pharmaceutical and/or drinking water applications.

Tasnee PP H4300M is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 30 g/10min.

PP H040 GP/1 is a polypropylene homopolymer with standard molecular weight distribution. The product is characterized by medium melt flow rate, an optimal stabilization package and balanced physical and mechanical properties.

Tasnee PP H2245 is a Polypropylene Homopolymer with a Melt Flow Rate (MFR) of 24.5 g/10min. Tasnee PP H2245 is a medium molecular weight distribution with anti-gas fading stabilization system. It has excellent gloss and chining properties.

Extrusion homopolymer PP, 30% glass fibers reinforced. For SDS, please contact Addiplast Group using the 'Request Document' button.

SAHARA H 120IM is a homopolymer used for general purpose injection molding applications. It exhibits good flow and stiffness. Its attribute in medium flow and stiffness.

PP reinforced with mineral filler, impact modified

Polifil® GFRMPPCC series compounds are high impact polypropylenes reinforced with chemically coupled glass fibers. This combination provides higher impact strength while retaining high stiffness. These compounds are used in appliances, electrical components, automotive and utility products. Standard processing techniques are applicable. Use this information as a guide to aid you in selecting the proper resin for your application. TPG will custom compound and fine-tune our formulations for your application.

Takaroku Shoji TR P853 is highly rigid and heat resistance can be improved by filling thermoplastic resin with various inorganic fillers.

PP reinforced with glass beads

APLAX® P2620GN is 30% Glass Filled, Chemically Coupled High Rigidity PP.

OKULEN® PP B - Pebble gray - FN7032 is a pebble gray basic stabilization polypropylene blockcopolymer with high melt viscosity and good low-temperature impact strength.

Trifilon BioLite® 6 is a hemp fiber reinforced heterophasic copolymer with medium flow properties designed for injection molding. This nucleated polypropylene based biocomposite is designed for high impact applications.

DuPure R 50 is a polypropylene homopolymer (produced with a phthalate-free catalyst) with a narrow/medium molecular weight distribution, and is formulated with a general purpose additivation package. The product shows a good flowability.

PP Impact modified

PETOPLEN EH102 is a medium flow, homopolymer polypropylene resin with medium molecular weight distribution. The material is developed for general purpose injection molding and fiber production for textile applications.

RG 1100 N is a Polypropylene Homopolymer. It is used in General Injection Molding, Closures, House Wares, Furniture

Polywood Cell 35 PP 10007 as a matrix material offers a wealth of properties that really bring a natural fiber to life. Depending on the product application, these materials can be filled with up to 75% of the natural fiber.

Osterman & Company Inc. Osterlene® PPC30-3.2 is a high crystallinity, medium impact copolymer resin with high melt flow rate and good processing attributes. It is designed for injection molded automotive interior applications and large appliance parts.Features of this resin include balanced stiffness/toughness, high impact resistance, nucleated, good stiffness, impact modified and slip.

DuPure R 76 is a nucleated polypropylene homopolymer (produced with a phthalate-free catalyst) with a narrow/medium molecular weight distribution. The product has been designed with a very high stiffness.

PTSCP08-G130 is a thermoplastic polymer, made by the chemical industry and used in a wide variety of applications, including packaging, ropes, textiles, stationery, plastic parts and reusable containers of various types, laboratory equipment, loudspeakers, automotive components, and polymer banknotes.