Products in Consumer Goods: Polyimides (PI)

VTEC™ GF63 is a High temperature resistance and it is Superior mechanical properties

VTEC™ BG21 is a High temperature resistance and it is Superior mechanical properties

Tubus Bauer GmbH PEI 4,0-144C is a tubus core made with Polyetherimide.

SolverPI Powder 1600 has high molecular weight, poor mobility, used for molding. Thermoplastic Pl is an amorphous resin, the products made from thermoplastic Pl is amber and transparent.

SolverPI Powder 1600X has high molecular weight, poor mobility, used for molding. Thermoplastic Pl is an amorphous resin, the products made from thermoplastic Pl is amber and transparent.

HexPly® F652 is a bismaleimide resin that cures via an addition reaction with no condensation by-products. HexPly® F652 is a controlled flow polyimide resin system designed for alternative processing capabilities such as co-curing over honeycomb core, compression molding, as well as standard autoclave processing.

Soundfoam HTC is lightweight, flexible, open cell polyimide foam.

HexPly® M65 is a bismaleimide resin that cures via an addition reaction in a toughened two-phase thermoset matrix with no condensation by-products. HexPly® M65 is a controlled bimaleimide resin system designed for alternative processing capabilities such as co-curing over honeycomb core, compression molding, as well as standard autoclave processing. HexPly® M65 has improved tack levels and performs well for fiber placement applications.

HexPly® F650 is a bismaleimide resin that cures via an additional/free radical mechanism resulting in a crosslinked thermoset system with no condensation by-products. HexPly® F650 was developed by Hexcel to overcome existing limitations for use on complex structures and ducting in advanced military aircraft, helicopters, and many other high temperature applications. HexPly® F650 simplifies fabrications and delivers a more costeffective end product.

Tubus Bauer GmbH PEI 4,0-120C is a tubus core made with Polyetherimide.

VTEC™ PI is a High temperature resistance and it is Superior mechanical properties

Tubus Bauer GmbH PEI 4,0-48C is a tubus core made with Polyetherimide.

Tubus Bauer GmbH PEI 4,0-75C is a tubus core made with Polyetherimide.

Tubus Bauer GmbH PEI 4,0-64C is a tubus core made with Polyetherimide.

35NQ is a pure polyimide laminate and prepreg system. Reinforced with woven Quartz fabric, combining the advantages of a reduced cure cycle, high temperature polyimide system (Tg >/=250°C), with low dielectric constant and loss tangent (DK = 3.5, loss 0.009 at 1 MHz) for applications requiring operation at RF/Microwave frequencies. Polyimide Quartz materials also exhibit reduced in-plane CTE for expansion matched SMT applications.

SolverPI Profile 2800 is suitable for molding all kinds of bearing, sleeve, gear box, mold, electronic components, with the characteristics of high temperature resistance, good toughness, flame retardant, can partially replace USA DuPont Vespel brand product.