Products in Appliances & Electronics: Reinforcement

Sunspacers™ 04.X are finely divided, optically clear, solid fused amorphous silica micronized powders. This product is specially engineered for paints, liquid and powder coatings, inks, adhesives, and thermoplastics, including UV curable compositions. These micronized powders increase corrosion resistance, reduce shrinkage, improve adhesion, and enhance surface qualities including abrasion, mar and scratch resistance. Sunspacers™ 04.X have a median particle size of approximately 3-4 microns, with a particle size range of 0.5 microns to 13 microns.

Sunspheres™ 200 Nm are optically clear, solid fused amorphous microspheres designed for use in a wide variety of coatings, inks, adhesives, powder coatings, and thermoplastics, including UV curable compositions. These sub-micron sized spheres can be used to improve physical and mechanical properties including reduced shrinkage, improved adhesion, impact resistance, and enhanced surface qualities such as hardness, mar and scratch resistance. The average particle size is 200 nanometers and range in size from about 50 nm to 500 nm.

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

The Sunspheres™ 200 Nm ST- 3 are surface treated*, optically clear, solid fused amorphous microspheres designed for optimum dispersion in coatings, inks, adhesives, and thermoplastics, including UV curable compositions. Cured films show enhanced physical and mechanical properties including increased corrosion resistance, reduced shrinkage, improved adhesion, and enhanced surface qualities such as mar and scratch resistance. This product is particularly useful in improving impact resistance. The average particle size is 200 nanometers and range in size from 50 to 500 nm.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Electrospun PVDF-HFP is an ultrafine mat of poly(vinylidene fluoride-co-hexafluoropropylene) produced by electrospinning. This product is a free standing flexible sheet with microstructural features not available from a bulk material. The fine scale of fiber diameters produces a membrane material with an inherently high surface area to volume ratio. The interconnected irregular shape pores within the fibers largely increases the pore volume (porosity) and accessible surface area.

Mica Is A Generic Term Applicable To The Group Of Complex Aluminosilicate Minerals That Occur Naturally In Plate Or Sheet-Like Form.

3B Fiberglass DS 8800-11P is a glass chopped strand specifically designed to rein-force high performance thermoplastic polymers, including PPS, PES, PSU, PPSU, PEI and PEEK. Furthermore, it shows interesting benefits in reinfor-cing PBT resins. 3B’s state-of-the-art manufacturing technology provides to DS 8800-11P very good strand integri-ty and bulk density leading to smooth compounders feeding, with low fuzz generation. DS 8800-11P displays excellent dis-persion within a large range of resin viscosities, enabling high glass fiber contents (> 55%). It is known for final reinforced parts’ heat stability and high mechanical properties combi-ned with hydrolysis/glycolysis perfor-mances that are rated from high to even outstanding specifically in PPS. DS 8800 -11P also meets stringent requirements of food contact and drinkable water standards such as EC 10/2011, FDA, BfR and ACS.

Style 1280 is 1.60 oz. per square yard (54.25 g/m2) plain weave fiberglass fabric.

Taishan Fiberglass ECW910(90), axial tape is produced by weaving looms, mainly used to increase axial strength of laminates and compatible with UP & VE resins.

3B Fiberglass CR 2080 consists of multiple continuous strands of smaller tex made from 3B E-CR glass wound onto a bobbin shape without mechanical twist and is free from static electricity generation.Choppable Roving CR2080 is silane sized and specifically designed for Sheet Molding Coumpound (SMC) application. SMC Rovings find appli-cations in automotive parts, sectional panel tanks, electrical items.2080 conforms to BS 14020 and IS 11320.

Taishan Fiberglass ECW510(90), axial tape is produced by weaving looms, mainly used to increase axial strength of laminates and compatible with UP & VE resins.

C10004068T is Wet-laid nonwovens consisting of 7-um diameter carbon fiber staple (1/4”&1/2") with 1-20 wt.% of cross-linked polyester binder. (Other binders available.). Widths can be specified.

Style 108 is 1.40 oz. per square yard (47.47 g/m2) plain weave fiberglass fabric.

C10004020T is Wet-laid nonwovens consisting of 7-um diameter carbon fiber staple (1/4”&1/2") with 1-20 wt.% of cross-linked polyester binder. (Other binders available.). Widths can be specified.

Applied Sciences Inc. PR-19-XT-PS has an average diameter of about 150 nanometers and has a chemically vapor deposited (CVD) layer of carbon on the surface of the fiber over a graphitic tubular core fiber. It is available in three grades designated as PS, LHT and HHT. The PS grade carbon nanofiber is produced by pyrolytically stripping the as-produced fiber to remove polyaromatic hydrocarbons from the fiber surface.

When high modulus fibers are combined with Innegra IS-940 fiber, weight can be reduced impact resistance, damage tolerance and signal transmission vastly improved, expanding the performance of existing materials.

Applied Sciences Inc. PR-24-XT-PS has an average diameter of about 100 nanometers and has a minimal chemically vapor deposited (CVD) layer of carbon on the surface of the fiber over a graphitic tubular core. It is available in three grades designated as PS, LHT and HHT. The PS grade carbon nanofiber is produced by pyrolytically stripping the as-produced fiber to remove polyaromatic hydrocarbons from the fiber surface.

Natex 2D 700 is a technical fabric in natural flax fiber designed from untwisted roving. It comes as Plain 1/1 Natex® Fabrics with Laize 1000 mm and as 700 g/m2.

When high modulus fibers are combined with Innegra IS-1250, weight can be reduced impact resistance, damage tolerance and signal transmission vastly improved, expanding the performance of existing materials.

362C Direct Roving is specifically designed for continuous fiber-glass reinforced thermoplastic (CFRT) application in modified PP/PE resin. CFRT materials are widely used in automotive, construction, sports, electric and electronic applications.

910 Assembled Roving for thermoplastic is coated with a silane-based sizing compatible with multiple resin systems such as PP, AS/ABS, especially reinforcing PA for good hydrolysis resistant. 910 is typically designed for twin-screw extrusion process to manufacture thermoplastic granules. Key applications include railway track fastening pieces, automotive parts, electrical & electronic applications.

Taishan Fiberglass EWR600, woven roving is made on looms by weaving direct roving into fabrics, it gives bi-directional (O° /90° ) reinforcement and is compatible with UP, VE & EP resins.

C10004017T is Wet-laid nonwovens consisting of 7-um diameter carbon fiber staple (1/4”&1/2") with 1-20 wt.% of cross-linked polyester binder. (Other binders available.). Widths can be specified.

3B Fiberglass 163D-14C chopped strand is specifically designed for excellent performances in injection and transfer molding processes & applications.The sizing coated at the glass fiber surface is engineered for enhanced compatibility with phenolic and epoxy resin systems.Thanks to its very light color, this product can be used in any natural grade compounds without impacting the color of the final part.Specific manufacturing technology provides 163D-14C chopped strand product with excellent dispersion and impregnation. As a result, this product offers excellent properties in a wide range of applications.

Nattex 2L is a semi-finished product in natural fiber in the form of continuous technical flax fibers. It comes as roving direct in natural fibers with pure flax of 2g/m.

Kamenny Vek BCS 13-1/4”-KV18 is mainly recommended for production of compounds by extrusion process with polypropylene, polyethylene and high density polyethylene resins.

3B Fiberglass DS 5163-13P chopped strand is spe-cifically designed for excellent per-formances in injection and transfer molding processes & applications.The sizing coated at the glass fiber surface is engineered for enhanced compatibility with phenolic and epoxy resin systems.Thanks to its very light color, this product can be used in any natural grade compounds without impacting the color of the final part.An innovative manufacturing techno-logy provides DS5163-13P chopped strand with an excellent strand inte-grity and bulk density. As a result this product exhibits excellent feeding properties with very low fuzz generation.

Taishan Fiberglass ECW710(90), axial tape is produced by weaving looms, mainly used to increase axial strength of laminates and compatible with UP & VE resins.

When high modulus fibers are combined with Innegra IS-1880, weight can be reduced impact resistance, damage tolerance and signal transmission vastly improved, expanding the performance of existing materials.

Natex UD 220 is a technical fabric in natural flax fiber designed from untwisted roving. It comes as Uni-directional Natex® Fabrics with Laize 1000 mm and as 220 g/m2.

Taishan Fiberglass EWR800, woven roving is made on looms by weaving direct roving into fabrics, it gives bi-directional (O° /90° ) reinforcement and is compatible with UP, VE & EP resins.