Products in Building & Construction: Epoxy & Epoxy Derivatives

PERMACOAT 4000 HT is a 100% solids epoxy floor coating designed for high temperature applications commonly found in many manufacturing processes. PERMACOAT 4000 HT is designed to withstand constant temperatures to 212°F (100°C) and intermittent exposures to 250°F (122°C). PERMACOAT 4000 consists of two components, resin and hardener, in both the horizontal and vertical formulations. Its application is accomplished with rubber squeegees and short nap paint rollers.

KEY #780 is a 100% solids semi-rigid epoxy joint filler used to protect saw cut joints in concrete slabs or in repair of existing damaged joints. KEY #780 absorbs the impact and shock of heavy loads and steel wheeled traffic, preventing erosion of control joint edges. KEY #780 is available in Regular Cure (RC), Fast Cure (FC), and Super Fast Cure (SFC) formulations.

Lattice Composites LCWR-1.5 is highly toughened, higher Tg version of LCWR-1.

Features Highest stiffness available Heat and abrasion resistant Excellent chemical resistance Great for windtunnel models, jigs and fixtures

SurePoxy HM is a 100% solids, two-component, and moisture-insensitive, epoxy resin system. It is an all purpose, very high strength rigid adhesive designed for structural bonding of dry and damp materials free of standing water. SurePoxy HM may be used with concrete, metals such as steel, wood, and other substrates.

Tapecoat® 7100 Wet Bond Epoxy is a two-part 100% solids epoxy.

EucoFloor Epoxy Primer is a three-component, high-performance bonding system, consisting of two components, medium viscosity epoxy (sold by Euclid Chemical) and oven-dried, coarse silica sand (sold separately- locally sourced by end-user). The medium viscosity epoxy is mixed and applied to the prepared concrete substrate, and is then immediately broadcast/”seeded” to refusal with the oven-dried coarse silica sand. This creates an aggressive surface profile that provides unsurpassed mechanical bonding for the subsequent cementitious topping.

Paladin Paints & Chemicals PPA 7041 is Epoxy Curing Agent.

Black Swan® Stik-It Epoxy Putty is a kneadable fast curing epoxy putty that mixes in one minute to provide permanent repairs to many surfaces including metals, wood, glass, concrete ceramics and numerous plastics. One hour after mixing, Black Swan® Stik-It Epoxy Putty can be drilled, sawed, sanded, filed, tapped, machined or painted. It comes in a handy tootsie roll form with the curing agent encapsulated in the contrasting color base material. Its remodeling clay-like consistency eliminated drips and runs, provides no mess application with no tools required for use. Stik-It Epoxy Putty is a general purpose epoxy putty.

TERRAZZCO® Groutless EZPour Epoxy 158 is a pigmented, 100% solid (VOC free), two-component epoxy resin system. When combined with aggregates and poured in place to 1/4” or 3/8” nominal thickness, it yields a highly decorative and durable terrazzo flooring system.

Anchor Seal SY5650* Amber is anchor-seal epoxy for potting compounds and encapsulants coils and transformers. It is low health hazard - general-purpose, limited drip / thixo version of SY5300.

Anchor Bond® 25 Degree Liquids Topcoat is a two component 100% solids epoxy topcoat designed for applications where temperatures are below freezing or where a rapid patch is necessary.

Razeen® SR 5077 is a solid, unmodified epoxy resin based on Bisphenol A.

Epoxy resin in the form of foil is designed for patent Letoxit Foil Technology (LF Technology).LF Technology is a dry lamination technique, which is suitable especially for production oflaminate structures with exactly defined reinforcement and resin content. If it is necessary toincrease the amount of resin in a certain place, it is also possible to combine epoxy resinLetoxit Foil with prepregs.Letoxit® LFX 060 can be applied for all types of reinforcement. Various types of glass,carbon or Kevlar fabrics or their combinations are mostly used. Unidirectional orientedreinforcements or 3D fabrics can be used, too. Letoxit® LFX 060 is suitable especially for productionof sandwich structures and honeycomb constructions. The produced laminate has very goodmechanical properties under stress in temperature range from -75°C to +100°C. Therefore itis used for manufacturing of aircraft parts and transport vehicles.

Polygem Aqua Gem Water Based Epoxy Primer is a water-based epoxy coating specially formulated for use as a hard coat for polystyrene and urethane foam surfaces. Aqua-Gem can be mixed with sand to create a thicker and very solid impact-resistant surface. Aqua-Gem’s unique water base formulation allows for ease of application over other hard coatings. When thickened with the Polygem Thickening Agent the Aqua-Gem will not stick to a trowel like other epoxy formulations. Aqua-Gem is ideal for use on damp and porous surfaces and can be used as a primer on hard to bond to surfaces. Add extra water to Aqua-Gem to use as a deep penetrating sealer for porous surfaces.

Poly Lining Systems PLS 477PW is an epoxy coating which has been specifically formulated for use in tanks, vessels and other equipment contacting potable water. PLS 447 PW is intended to be applied to steel substrates which have been cleaned to meet the specification NACE No.2/SSPC-SP10 Near White Metal Blast. PLS 447PW is a 100% solids formulation featuring good application characteristics.

Chemtek Products CF-360 is a two component waterborne epoxy coating that exhibits excellent characteristics that rival solvent base coatings AQUA-POXI does have excellent chemical resistance and abrasion wear. Recommended for concrete, masonry and wood floors.

PanTINT® 70 and 72 Series are concentrated pigment dispersions in a plasticizer base. Compatible with a wide range of polyvinyl chloride (PVC) resin formulations for thermoplastic applications. The Pigments chosen for the 70 and 72 Series exhibit color brilliance, strength, chemical and UV resistance and lightfastness. Most are suitable for interior and exterior applications. The 70 Series are pigments dispersed in a monomeric pthalate plasticizer while the 72 Series are dispersed in pthalate compliant plasticizer.

Terrazzco® Terrazzco Moisture Mitigation System MMS 950 is a VOC free 2 component epoxy resin system cured with an amine curing agent and applied on the top surface of concrete slabs providing a retarder against moisture vapor transmission for slabs having a relative humidity of 70-95%. The product is mixed and applied onto the top surface of the concrete soaking into and sealing the pored while it builds a thin film layer approximately 6 mils on the surface. MMS 950 yields approximately 300 – 400 square feet per mixed unit. Coverage is based on the porosity of the concrete and may require a second application for very porous surfaces.

RESAFEN® 13-707 is a solid cresilic resin designed mainly for epoxy phenolic coatings.

Abocoat 8508-1 excels as a protective and decorative coating for concrete, metal, wood and composite surfaces, indoors and outdoors. It is applied to floors, walls, machinery and installations in industrial, marine, and architectural environments. It is an excellent base coat for polyurethane and other coatings.

Sumter Coatings Enviro Pox 949 High Build Epoxy is a high build epoxy mastic is a high-quality coating that can be used with or without primer over steel, galvanized metal, aluminum and concrete. Enviro-Pox 949 High Build Epoxy Mastic bonds directly to steel or concrete. A single coat can out perform several coats of alkyd coating. Two coats of this coating may be applie d at one-hour intervals for a total of 15 mils dry film.

Protal 7200™ is a VOC free, 100% solids, 2 part epoxy coating specially formulated to compliment FBE coated pipe. It is a high build liquid coating that is brush or spray applied in one coat in the field or shop. It cures very fast to allow quick handling and backfill times.

PC-155 is a moisture tolerant two component modified Polyamine Cured Clear Epoxy designed as a concrete primer to be used under our epoxy grouts, mortars, toppings, high performance coatings and lining systems. The low viscosity provides deep penetration into the concrete for excellent surface adhesion. Can be topcoated with 100% solids in 30 mins. – 1 ½ hrs at 75°F.

THINPREG™ TP 135 is a breakthrough product combining high strength and high toughness in a thin ply format. The PES-toughened epoxy system shows compression after impact properties typical of 3rd generation aerospace matrices. Thin ply materials achieve higher usable properties from the fiber through spreading load more consistently though the laminate and delaying first ply failure. Negligible ply drop-off effects and greater degrees of freedom in design are now combined with a PES-toughened system for high resolution, highly optimized, super-strong composite structures.

True-Bond CR™ is formulated to resist chemicals, including acids and caustics. Commonly used for coating chemical containment areas and repairing drain openings, this material stands up to your very worst!. True-Bond CR™ concrete filler and bonder that will not be affected by chemicals or acids Will not separate from concrete. Resurfaces chipped and pitted concrete. Resists wear, weather, impact Bonds cracked curbing, and masonry. Waterproof One application lasts for many years.

PERMATEC 3000 XCT is a 100% solids epoxy floor topping designed for cold temperature applications commonly found in food and beverage processing facilities. The PERMA TEC 3000 XCT system consists of a two component resin binder and graded aggregate. It is applied with a trowel or screed rake at 1/8 -1/4 inches (125 - 250 mils) in a one coat application including a silica broadcast. There is no need for a primer or sealer coat. An optional glaze coat may be used to improve the appearance and cleanability. The vertical formulation of PERMA TEC 3000 XCT is trowel applied at 1/8 inches (125 mils).

Highland International 74-HF is a thin film 2-K Hybrid Epoxy Novolac DTM/ Liner Coating that offers exceptional temperature and chemical protection. Specifically formulated for tank linings, vessels, and pipelines, 74-HF Series provides superior barrier properties against acidic, caustic, and high heat environments. Chem-Temp 74-HF Series also offers excellent adhesion and corrosion resistance with a temperature rating of 300˚F for immersion (350°F for some cargoes/services) and 450˚F for dry heat or CUI services, making it the premium choice for high performance against corrosive cargo.

Abocoat 8501-1™ is a Coating with Exceptionally High Resistance To Acids, Alkalis, Solvents, Acetone, Alcohol, & Gasohol. High Solids 2-Component, Fast-Setting Epoxy System.

AX-3110 is a Toughened, Flame Retardant Epoxy Fiberglass Prepreg.

55NT is an epoxy laminate and prepreg system, reinforced with a non-woven aramid substrate. This system combines compatibility with lead-free processing, using a hightemperature epoxy resin, with the low in-plane (x,y) expansion and outstanding dimensional stability of non-woven aramid reinforcement.

1255 Black Barrier Coal Tar™ is a two component high build Coal Tar Epoxy for use on properly prepared steel, aluminum, galvanized and concrete substrates. Provides heavy duty protection for exposures in marine (ship hulls, tanks, pilings, etc.) petroleum, (refinery tanks, piping, offshore structures, etc.) water and water treatment. Black Barrier Coat meets or exceeds all requirements of the Corp. of Engineers Specification C-200, Government Specification MIL-P 23236 and Steel Structures Paint System SSPC Paint 16-68T.

Armor Plate 991 Anchor Bolt and Rebar Grout For Vertical Holes is a pourable grade epoxy grout that is ideal for a variety of maintenance and construction projects. AP 991 is so versatile because it forms an impervious chemical and moisture barrier that inhibits corrosive and oxidizing processes at the rebar and anchor bolts. AP 991 is primarily used for grouting rebar and anchor bolts. It is also used as a patching compound for concrete, steel, and wood. AP 991 will also bond new concrete to old concrete. AP 991 is recommended to anchor equipment such as compressors, diesel engines, printing presses, power generators, hydraulic presses, turbines and pumps.

Duresco NU 510-1 F is a Glass fiber reinforced epoxy molding compound with very good mechanical properties for high temperature applications.

Razeen® LR 2253 is a low viscosity epoxy resin based on bisphenol A and modified with aliphatic diglycidyl ether.