Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Building & Construction
Building Materials
Structural Components
Products in Structural Components
2,256 Products found in Structural Components
Filters
Suppliers
Product Families
Functions
End Uses
Chemical Family
Features
Products
Brands
Suppliers
Formulations
Documents
Relevance
AI Technology
SOLAR BLOC™ SC 7053-WHITE
Applications:
Marine, Glass Coatings, Structural Components
Product Families:
Protective Coatings, Paints & Coatings
AI Technology
SOLAR BLOC™ SC 7053-RED
Applications:
Marine, Glass Coatings, Structural Components
Product Families:
Protective Coatings, Paints & Coatings
Techno Compound
Techno Compound PBT4 Natural (9999)
Polymer Name:
Polybutylene Terephthalate (PBT)
Flexural Modulus:
2300.0 - 2300.0 MPa
Techno Compound PBT4 Natural (9999) is a thermoplastic which combines great hardness, stiffness and strength. TechnoDur is easily processed due to its perfect flow behavior. The favorable sliding and wear characteristics as well as extremely high tenacity in temperatures below freezing are further advantages.
Elastron
SEBS - ELASTRON G400.A90.N
Tear Strength:
70.0 - 70.0 kN/m
Strain at Break:
600.0 - 600.0 %
Compression Set (70 °C):
60.0 - 60.0 %
A soft, colorable unfilled SEBS based thermoplastic elastomer (TPE) compound which has very good physical properties and chemical resistance. This product is a good option when good abrasion resistance is required.
Basaltex NV
Basaltex NV MULTIDIRECTIONAL FABRICS 600
Applications:
Technical Fabrics, Equipment & Parts, Structural Components
Product Families:
Natural Materials, Reinforcements
End Uses:
Yacht, Surfboards, Snowboards
Basaltex NV Multidirectional Fabrics 600 are laid in different orientations, layer-by-layer, and stitched together with a lightweight polyester yarn to form a fabric. Respect to woven fabrics, Non-Crimp (NC) fabrics offer better mechanical properties, primarily from the fact that the fibers are always straight and that more orientations of fiber are available from the increased number of layers of fabric. Due to the stitched nature of the multiaxial construction, the crimp effect associated with woven fabric is not present.
UMATEX
UMATEX ACM CG600X
Applications:
Pavement, Highways, Roads & Bridges, Medical Devices & Assemblies, Interior
Product Families:
Glass Fiber, Carbon Fiber, Reinforcements
Chemical Family:
Glass Beads & Fibers, Carbon Fiber
End Uses:
Structural Components
ACM CG600X is Multiaxial Hybrid Fabrics with Standard fabric width of1270 mm having EP/VE Resin compatibility Multiaxial fabrics are textile materials made of several layers of high-strength composite fibers stitched together with thin threads. Multiaxial fabric can be carbon, glass, basalt, and hybrid according to the source fibers.
Jushi Group
Jushi Group 362C
Applications:
Equipment & Parts, Advanced Materials, Consumer Electronics
Product Families:
Glass Fiber, Reinforcements
Chemical Family:
Glass Beads & Fibers
End Uses:
Machine/Mechanical Parts
362C Direct Roving is specifically designed for continuous fiber-glass reinforced thermoplastic (CFRT) application in modified PP/PE resin. CFRT materials are widely used in automotive, construction, sports, electric and electronic applications.
Polynt Group
POLYGEL 34
Chemical Family:
Diols, Isophthalics, Glycols, Polyesters, Unsaturated Polyester (UPE)
Functions:
Surface Finish
End Uses:
Pipes, Tanks
Polynt Group Polygel 34 - iso NPG gel coat; resistant to water and osmotic blistering. Main applications areas are building and construction, composites, home and domestic applications, industrial sector etc.
Elastron
TPO - ELASTRON T400.A70.B
Polymer Name:
Thermoplastic Polyolefin (TPO)
Processing Methods:
Injection Molding
Features:
High Hardness
Density:
900.0 - 900.0 kg/m³
Strain at Break:
450.0 - 450.0 %
A soft, black thermoplastic polyolefin elastomer (TPO) material belongs to thermoplastic elastomer (TPE) family designed for general purpose applications.
Morgan Adhesives
Morgan Adhesives Professional Tilers Blend
Ready-to-Use Product Type:
Cement Adhesive
Application Area:
Floor, Wall
Compatible Substrates & Surfaces:
Stone, Brick, Concrete
Application Method:
Trowel
Morgan Adhesives Professional Tilers Blend is a pure white adhesive composed of cement, fine graded sands and other special additives. This adhesive has been polymer modified to achieve a high bond strength with non-porous tiles.
Finornic Chemicals
Finornic Chemicals FINOR-MBI-011
Functions:
Antioxidant
Compatible Polymers & Resins:
Natural Rubbers (NR)
Features:
Anti-Oxidant
Synonyms:
1,3-Dihydrobenzimidazole-2-thione, Mercaptobenzimidazole
Finornic Chemicals Finor-MBI-011 is used as synergistic antioxidant for rubber. Is a good heat sensitizer and gel forming agent.
Polynt Group
NORSODYNE® H 44173
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Processing Methods:
Spray Lay-up, Centrifugal Casting, Pultrusion, Filament Winding, Vacuum Bagging, Resin Transfer Molding (RTM), Hand Lay-up, Compression Molding
End Uses:
Pipes, Tanks, Structural Components
NORSODYNE® H 44173 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats,pipes and tanks through centrifugal casting,filament winding,hand lay up and spray up,injection molding,rtm,press and vacuum molding,pultrusion method.
Diab
Divinycell® H160
Functions:
Core Material
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives
Divinycell H provides excellent mechanical properties to low weight. The unique IPN chemical structure, yields impressive mechanical performance to a low weight. Divinycell H has been widely used and has a proven track record in virtually every application area where sandwich composites are employed including the marine (leisure, military and commercial), land transportation, wind energy, civil engineering/infrastructure and general industrial markets. Divinycell H is ideal for applications subject to fatigue, slamming or impact loads. Other key features of Divinycell H include consistent high quality, excellent adhesion/peel strength, excellent chemical resistance, low water absorption and good thermal/acoustic insulation. Divinycell H is compatible with virtually all commonly used resin and manufacturing systems.
Krisoll Resinas Plasticas
SOLLAMID A 2730
Polymer Name:
Polyamide 66 (PA 66)
Processing Methods:
Injection Molding
Fillers Included:
Graphite
Sollamid A 2730 is the formula for Heat Protected Polyamide.
Idemitsu Chemicals
Tarflon® AZ2201
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Additives Included:
Flame Retardant
Flame retardant
HOS-Technik
HOZOLE
Polymer Name:
Polybenzimidazole (PBI)
HOZOLE is a high-performance duroplastic resin system.
Northern Composites
Northern Composites NRF-5000
Physical Form:
Film
Color:
Red, White, Violet, Transparent
NRF-5000 is a high elongation release film suitable for cure cycles up to 500°F (260°C). It is compatible with most commercial resins and releases easily.
Nylene
Duratel™ MF3
Polymer Name:
Polyacetal Copolymer (POM)
Nylene Duratel MF3 is a high-viscosity acetal co-polymer. Duratel MF3 has slightly higher toughness than standard MF9, and parts molded with MF3 should have thicker wall sections and shorter flow lengths to accommodate the higher viscosity. MF3 is suitable for such applications as clips, fasteners, gears, bushings and bearings, and other uses where long term creep and wear resistance are required.
Elastron
SEBS - ELASTRON G101.D47.B
Tear Strength:
54.0 - 54.0 kN/m
Strain at Break:
550.0 - 550.0 %
Compression Set (70 °C):
80.0 - 80.0 %
A hard, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.
Depestele
LINCORE® PP FF P2 40 400
Polymer Name:
Polypropylene (unspecified)
Processing Methods:
Compression Molding
Fillers Included:
Flax Fibers
LINCORE® PP FF P2 40 400 is a fabric made of LINCORE® roving (commingled flax and PP filaments). Consolidation is done by heating above melting temperature of PP matrix (180°C-230°C) and applying a low pressure (1-30 bars), before a cooling step under pressure. The molding can be realized by : Diaphragm (1 to 8 bars), Thermo compression (10 to 200 bars), Sandwich thermo compression (1 to 5 bars).
ISO TECH Kunststoff GmbH
ISO-LEN® POLYRUBBER
Applications:
Non-Food Consumer Packaging, Other Packaging Materials, Other Industrial Applications
Product Families:
Parts & Shapes
Chemical Family:
Polyolefins, Polyethylenes
Polymer Name:
High Molecular Weight Polyethylene (HMWPE), Thermoplastic Elastomer (unspecified)
End Uses:
Rigid Films, Film, Cosmetic Packaging
ISO-LEN® Polyrubber consists of two different thermoplastics: High molecular weight low-pressure polyethylene (ISOLEN ° 500, colors: red-brown, confetti or black) and thermoplastic elastomer (TPE; color: black). These materials come in either two homogeneous composite layers are pressed together, or the TPE is in the near-surface Layers of PE interspersed. In the case of separate layers, the ISO-LEN 500 enables problem-free attachment, for example by means of rivets or screws to a steel beam, while at the same time the Carrier material in contact with the product TPE the storage and transport of painted or sensitive, finished workpieces. In the interspersed Variant, a slip-resistant effect is achieved.
Texonic
Texonic TF-07-T
Applications:
Waterproofing & Weatherproofing, Building Envelope & Roofing, Roofing Sheets
Product Families:
Natural Materials, Reinforcements
End Uses:
Pipe Repair, Roofing Membranes, Structural Parts
TF-07-T is a Basalt Fiber which has a chemical composition similar to glass, but what truly distinguishes it from glass is it’s high-melting point, allowing it to be exposed to high temperatures for extended periods of time.
Idemitsu Chemicals
Tarflon® GZ2540
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Flame Retardant
High Stiffness, Flame-retardant
Elastron
SEBS - ELASTRON G301.A45.N
Tear Strength:
27.0 - 27.0 kN/m
Strain at Break:
900.0 - 900.0 %
Compression Set (70 °C):
39.0 - 39.0 %
A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.
BARLOG plastics GmbH
Kebablend® / WR FE 190202
Polymer Name:
Polyamide 66 (PA 66)
BARLOG plastics GmbH Kebablend® / WR FE 190202 is a special compound based on PA66 that combines high strength and impact resistance with good sliding behavior and high wear resistance.
Elastron
TPV - ELASTRON V201.D51.N
Density:
950.0 - 950.0 kg/m³
Tear Strength:
110.0 - 110.0 kN/m
Compression Set (70 °C):
59.0 - 59.0 %
A hard, colorable thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family which offers higher temperature resistance and excellent compression set with superior UV resistance.
Polynt Group
DISTITRON® 429 ESX20Q
Polymer Name:
Polyester (unspecified)
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Processing Methods:
Spray Lay-up, Hand Lay-up
End Uses:
Pipes, Tanks
DISTITRON® 429 ESX20Q - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce marine,boats,reinforced plastics,general purpose through hand lay up and spray up method.
Seals Eastern
Seals Eastern Compound 7240
Polymer Name:
Ethylene Propylene Diene Terpolymer (EPDM)
Seals Eastern Compound 7240 is 52-duro EPDM.
SELCOM SRL Multiaxial Technology
SELCOM SRL Multiaxial Technology CBX50
Applications:
Exterior & Body, Sports & Recreation, Structural Components
Product Families:
Carbon Fiber, Reinforcements
Chemical Family:
Carbon Fiber
SELCOM SRL Multiaxial Technology CBX50 is a non-crimped fabric reinforced with carbon fibers.
Foundation Armor
Armor AX25
Ready-to-Use Product Type:
Sealer, Solventborne Coating
Compatible Substrates & Surfaces:
Concrete
Features:
Breathable, Excellent Water Repellency , Microbe Resistant, Mildew Resistant, UV Resistant, Low VOC, High Gloss
Application Method:
Spray
Chemical Family:
Acrylics & Acrylates
Armor AX25 is a solvent-based siloxane infused high gloss acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, protect the surface with a durable high gloss surface film, and provide superior water repellency benefits. Color packs are available and can be mixed in to provide an opaque colored low gloss finish. Non-slip additives are also available.
Elastron
TPV - ELASTRON V201.A59.B
Density:
970.0 - 970.0 kg/m³
Tear Strength:
22.0 - 22.0 kN/m
Compression Set (70 °C):
28.0 - 28.0 %
A soft, black thermoplastic vulcanizate, TPV (EPDM/PP) in the thermoplastic elastomer (TPE) family which offers higher temperature resistance and excellent compression set with superior UV resistance.
Elastron
SEBS - ELASTRON P.G401.A70.B
Polymer Name:
Styrene Ethylene Butylene Styrene (SEBS)
Processing Methods:
Extrusion, Injection Molding
Tear Strength:
45.0 - 45.0 kN/m
Strain at Break:
950.0 - 950.0 %
Compression Set (70 °C):
43.0 - 43.0 %
A soft, black SEBS based thermoplastic elastomer (TPE) compound designed for use in medical applications.
Elastron
SEBS - ELASTRON G100.A21.N
Tear Strength:
12.0 - 12.0 kN/m
Strain at Break:
800.0 - 800.0 %
Compression Set (70 °C):
40.0 - 40.0 %
A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.
Elastron
SEBS - ELASTRON G301.A75.B
Tear Strength:
36.0 - 36.0 kN/m
Strain at Break:
750.0 - 750.0 %
Compression Set (70 °C):
48.0 - 48.0 %
A soft, black SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance.
Lati Industria Thermoplastici S.p.A
Latilub™ 66-01M
Polymer Name:
Polyamide 66 (PA 66)
Processing Methods:
Injection Molding
Additives Included:
Lubricant (Unspecified)
Self-lubricating product based on Polyamide 66 (PA66). Molybdenum dysulphide.
Idemitsu Chemicals
Tarflon® GZ2510
Polymer Name:
Polycarbonate (PC)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Mold Release Agent
Flame-retardant
Show
36
of 2,256 results
Go to page
1
2
3
4
5
6
7
8
9
10