Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Agrochemical Functions
- Base Chemicals Functions
- Cleaning Ingredients Functions
- Fluids & Lubricants Functions
- CAS No.
- 61791-26-2
- EC No.
- 500-153-8
- Product Families
Features & Benefits
- HII Features
Applications & Uses
- Applications
- Home Care Applications
- I&I Cleaning Applications
Properties
- Formulation Type
- Appearance
- Liquid/paste
- Soluble in
- Ethanol, Propylene glycol, Isopropyl alcohol, Xylene, Low aromatic solvent, White spirit
- Dispersible in
- Water
- Physical Properties
- Characteristics
- Specifications
- Notes
Typical Data are based on our own measurements or derived from the literature. They do not constitute part of the delivery specification.
Value | Units | Test Method / Conditions | |
Density (at 35°C) | 890 | kg/m³ | - |
Pour Point | 32 | °C | |
Viscosity (at 35°C) | 75 | mPa.s | - |
Value | Units | Test Method / Conditions | |
Active Content | 100 | % | - |
Cloud Point | 33 | °C | - |
HLB | 10.1 | - | Davies Scale (0-40) |
Initial Boiling Point (760mm Hg) | min. 300 | °C | - |
Melting Point | 29 | °C | - |
Flash Point | min. 100 | °C | Pensky Martens Closed Cup |
Specific Gravity | 0.916 | - | - |
Foam Height according to Ross-Miles (at 50°C, 0.05%, after 5 mins) | 2 | mm | - |
Foam Height according to Ross-Miles (at 50°C, 0.05%, immediately) | 5 | mm | - |
Viscosity | 34 | cps | - |
Specific Heat | 0.471 | BTU/Lb | - |
Vapor Pressure (at 20°C) | max. 0.1 | mm Hg | - |
Surface Tension (according to Du Noüy, 0.1% ) | 28 | mN/m | - |
Tertiary Amine | min. 96 | % | |
Wetting Power (according to Draves, at 20°C, 0.1%) | min. 600 | seconds | - |
Value | Units | Test Method / Conditions | |
Amine Number | 156 - 165 | mg KOH/g | - |
Moisture Content | max. 1 | % | - |
Clear Point | 32 | °C | - |
Primary + Secondary Amine | max. 3 | % | - |
Color | max. 6 | - | Gardner |
Equivalent Mass | 340 - 360 | - | - |
Water Content | max. 1 | % | - |
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Conditions
Ethomeen T/12 should always be homogenized before use, unless the entire quantity is used.