Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Composites Processing Methods
- Plastics & Elastomers Processing Methods
Properties
- Physical Properties
- Mechanical Properties
- Electrical Properties
- Processing Information (Injection Molding)
Value | Units | Test Method / Conditions | |
Density | 11 | g/cc | ASTM D792 |
Value | Units | Test Method / Conditions | |
Tensile Elongation at Break | 12 | % | ASTM D638 |
Tensile Strength | 12 | MPa | ASTM D638 |
Tensile Modulus | 668 | MPa | ASTM D638 |
Izod Impact Strength (notched) | 267 | J/m | ASTM D256 |
Flexural Modulus | 800 | MPa | ASTM D790 |
Flexural Strength | 23 | MPa | ASTM D790 |
Value | Units | Test Method / Conditions | |
Surface Resistivity | 0.2 | ohms/sq | ASTM D257 |
Value | Units | Test Method / Conditions | |
Melt Temperature Range | 205 - 220 | °C | - |
Mold Temperature Range | 10 - 25 | °C | - |
Mold Shrinkage Rate | 0.3 - 0.5 | % | ASTM D955 |
Pre-Drying Conditions (at 85°C) | 2 - 4 | Hours | (do not over-dry) |
Regulatory & Compliance
- Certifications & Compliance