Products in Other Electrical & Electronics Applications: Polyethylenes

LINXIDAN® LX4436 is a maleated polyolefin Coupling Agent designed for alloying dissimilar materials to improve physical properties. Suggested loading levels are between 1 and 4 wt% depending on the specific materials being compounded, particular physical property of interest and level of improvement desired in the identified property.

LINXIDAN® LX4520 is a polyolefin copolymerized with a siloxane functionality, designed to improve compatibility and mechanical properties of polymer compounds.

LINXIDAN® LX4433 is a Maleated HDPE Coupling Agent designed specifically to chemically bind natural fibers to HDPE in Wood-Plastic Composites. Coupling fibers to the HDPE matrix, in a 50% wood-filled system, reduces moisture uptake while increasing flexural modulus by 20% and overall flexural strength by 90%.

Trecora Chemical OX-7 is an oxidized polyethylene wax. It is easily emulsified. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Can be used to control gloss to achieve a desired matt effect. OX-7 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

UNIFOAM® XPE 60 is made from high-quality polyethylene polymer and additives.

UNIFOAM® XPE 100 is made from high-quality polyethylene polymer and additives.

Trecora Chemical CWP130X is a polyethylene wax. Imparts a non-stick character to a coating that decreases the tendency for blocking. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can be used to control gloss to achieve a desired matt effect. CWP130X by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

UNIFOAM® XPE 45 Dark is made from high-quality polyethylene polymer and additives.

Trecora Chemical OX-18 is an oxidized polyethylene wax. Provides anti-block, release and gloss control properties. It is easily emulsified. Imparts a non-stick character to a coating that decreases the tendency for blocking. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can aid in the resistance properties of a coating. Can be used to control gloss to achieve a desired matt effect. OX-18 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Trecora Chemical CHU610 is a polyethylene wax. Provides anti-block, release and gloss control properties. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can be used to control gloss to achieve a desired matt effect. CHU610 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

UNIFOAM® XPE 45 is made from high-quality polyethylene polymer and additives.

Trecora Chemical CWP400 is a polyethylene wax. Exhibits abrasion-, rub- and mar resistance. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can be used to control gloss to achieve a desired matt effect. CWP400 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Diamond Plastics DiaPow HDPE HX is a polyethylene laser sinter powder black with very high chemical resistance.

UNIFOAM® XPE 140 is made from high-quality polyethylene polymer and additives.

NUC's LDPE are used in many of packages, bottles and tubes for daily necessities such as seasonings, eye drops, internal medicine as well as cosmetics which are produced by hollow molding, extrusion molding or injection molding due to good processability.

Trecora Chemical CWP2030 is a polyethylene wax. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can be used to control gloss to achieve a desired matt effect. CWP2030 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

UNIFOAM® XPE 200 is made from high-quality polyethylene polymer and additives.

Trecora Chemical CWP500E is a polyethylene wax. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can be used to control gloss to achieve a desired matt effect. CWP500E by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Trecora Chemical CHU561 is a polyethylene wax. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax.

Trecora Chemical CWP400E is a polyethylene wax. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Exhibits abrasion-, rub- and mar resistance. Provides anti-block, release and gloss control properties. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can be used to control gloss to achieve a desired matt effect. CWP400E by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

NUC's LDPE are used in many of packages, bottles and tubes for daily necessities such as seasonings, eye drops, internal medicine as well as cosmetics which are produced by hollow molding, extrusion molding or injection molding due to good processability.

UNIFOAM® XPE 33 is made from high-quality polyethylene polymer and additives.

Quality Minerals POLYETHELENE WAX is the trade name of Quality Minerals PCL is polyethylene wax. It has unique polymer properties that make them suitable for many applications. Q-plas EW is produced in pellet/flake form using state-of the art equipment from Federal Republic of Germany.

Trecora Chemical CWP500 is a polyethylene wax. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Imparts a non-stick character to a coating that decreases the tendency for blocking. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can be used to control gloss to achieve a desired matt effect. CWP500 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

UNIFOAM® XPE 120 is made from high-quality polyethylene polymer and additives.

UNIFOAM® XPE 25 is made from high-quality polyethylene polymer and additives.

UNIFOAM® XPE 33 Dark is made from high-quality polyethylene polymer and additives.

NUC's LDPE are used in many of packages, bottles and tubes for daily necessities such as seasonings, eye drops, internal medicine as well as cosmetics which are produced by hollow molding, extrusion molding or injection molding due to good processability.