Products in Building & Construction: Rosins

Flytac 120 - 90W is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 103 - E is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flytac 103 - 90 is a slightly yellow, transparent solid made from gum rosin through esterification with glycerol. This product has a high viscosity, low VOC, excellent heat and aging stability, excellent polymer compatibility, etc. Typical Uses EVA, SBS, SIS, and other hot melt adhesives due to their stability and excellent polymer compatibility. It can also be used in construction adhesives, rubber compounding, sealants, coatings, and other applications.

Flytac 111 - 101 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 104 - P is a pale, thermoplastic, acidic resin produced by partially hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Flytac 120 is a granular, water-white, modified gum rosin polyols esters made from specially refined gum rosin using a series of advanced processes of partial hydrogenation, esterification, and stabilization. They are a new generation of natural tackifier resins that exhibit good aging resistance, and excellent compatibility. Also capable of raising the initial and persistent viscosity of pressure-sensitive adhesive in a simultaneous way, the excellent heat stability increases by less than 1 degree of Gardner Color within consecutive 8 hours at 180°C.

Flytac 105 - F is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 111 - 301 is a thermoplastic, acidic resin produced by hydrogenating rosin to an exceptionally high degree with eliminated foreign matter and coloring radicals. It is one of the palest, most highly stabilized rosins commercially available. This product is especially indicated as the tackifier in solvent adhesives and hot-melt applied coatings and adhesives that must excel in these properties.

Flytac 105 - P is a glycerol ester of hydrogenated rosin. It has found wide acceptance in chewing gum, hot melt, pressure-sensitive, laminating adhesives, and wax depilatories. In general, it finds use where there is a need for a pale, non-oxidizing, color-stable, and highly tacky liquid resin.

Flytac 104 - F is a pale, thermoplastic, acidic resin produced by fully hydrogenating the rosin. Because of this treatment, it is highly resistant to oxidation, discoloration, and changes in solubility characteristics when exposed to air and sunlight.

Teckros® R100 is a light- colored, stabilized pentaerythritol ester of gum rosin used in a wide range of hot melt, pressure sensitive, other adhesives, and many other applications where rosin ester performance and pleasant odor are important. Unlike tall oil-derived rosin esters, Teckros® R100 is free from meaningful sulfur content resulting in low odor of a pleasant character.

SYLVATAC RE 5S liquid rosin ester has broad compatibility with polymers used in flooring and construction applications. With an optimized mixture of resins and plasticizers, SYLVATAC RE 5S can be used as a self-emulsifying blend for water-based acrylic polymers.

SYLVATAC RE 25 rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

SYLVALITE RE 105XL rosin ester is very light colored and stable with moderately high softening point. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications. Adhesives formulated with SYLVALITE RE 105XL resin achieve the lightest color among the rosin ester product range.

SYLVALITE RE 100F rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 100F exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

SYLVALITE RE 88F rosin ester is a very light and stable glycerol ester with a medium softening point. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications. This rosin ester is especially suitable for pressure sensitive adhesive tapes and labels application. The low Tg of SYLVALITE RE 88F rosin ester provides enhanced performance at lower temperatures.

SYLVALITE RE 85GB rosin ester is an ester of stabilized Tall Oil Rosin. This light colored product has been formulated to provide excellent heat and aging stability. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives, it provides excellent color stability when compared with other tackifiers of its type.

V-TAC™ 8501

SYLVATAC RE 85 rosin ester is a stabilized glycerol ester of Tall Oil Rosin. The thermal stability and polymer compatibility of this resin make it useful in a wide variety of adhesives. The low Tg of SYLVATAC RE 85 rosin ester enables adhesive performance at lower temperatures.

SYLVALITE RE 100S rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 1005 exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

SYLVALITE RE 110L rosin ester is a light-colored, high softening point, pentaerythritol ester of tall oil rosin, which has been formulated to provide excellent heat and aging stability. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives it provides excellent color stability when compared with other tackifiers of its type.

Fintac 2331 is a modified rosin which offers an excellent combination of oxidation and crystallization resistance. This product functions as a tackifier for SBR, natural rubber, butyl rubber, ethylene-vinyl acetate and other polymers. It can be delivered in flaked and solid forms. Formulated in solvent-based and water-based adhesives, it exhibits no tendency to crystallize. It meets the requirements of the Code of Federal Regulations, Title 21, under the following section: 175.105 Adhesives; 176.210 Defoaming Agents Used in the Manufacture of Paper and Paperboard; 177.2600 Rubber Articles Intended for Repeated Use.

SYLVALITE RE 100L rosin ester is a stabilized pentaerythritol ester of Tall Oil Rosin. SYLVALITE RE 100L exhibits low color and good color stability. This resin is compatible with a broad range of polymers, which enables formulation flexibility in various hot melt and solvent based adhesive applications.

SYLVALITE 9000 resin is a biobased tackifier that combines differentiated adhesion with light color and advanced stability.

V-TAC™ 9001 dispersion is an aqueous, 55% solids, solvent-free anionic rosin based dispersion compatible with the following latexes: acrylic, styrene-butadiene rubber, natural rubber and polychloroprene. V-TAC™ 9001 enhances adhesion as well as superior heat resistance. V-TAC™ 9001 is recommended as a tackifier for pressure sensitive and contact-bond adhesives.

SYLVATAC RE 12 liquid rosin ester has broad compatibility with polymer used in flooring and construction applications. With optimized mixture of resins and plasticizers, SYLVATAC RE 12 can be used as a self-emulsifying blend for water-based acrylic polymers.

SYLVALITE RE 10L rosin ester is a low softening point ester of tall oil rosin with good stability and mild odor. This liquid tackifier has wide compatibility, allowing it to be used in many adhesive systems, particularly where better wetting or low temperature tack is required.

POLYTONE™ P 140 is a modified phenolic resin for use with drying oil, such as linseed & tung oil.

EST 5511 99 is a Glycerine ester of Gum Rosin.

SYLVALITE RE 105L rosin ester is a pentaerythritol ester of rosin with a higher softening point than typical products of its type. It has been formulated to provide outstanding heat and aging stability. The stability, low volatility and polymer compatibility of this product make it useful in wide variety of adhesives and other applications where improved heat resistance and shear strength are required.

EST 5510 99 is a Glycerine ester of Gum Rosin.

SYLVATAC RE 98 rosin ester is an economical pentaerythritol ester of tall oil rosin. This rosin ester is a broadly compatible tackifier. This is a versatile product for any application that can tolerate a slightly higher formulation color.

SYLVATAC RE 95 rosin ester provides broad polymer compatibility and excellent adhesive performance. This rosin ester improves the functional performance and value-in-use of woodworking, packaging and pressure sensitive adhesives.

SYLVALITE RE 80HP rosin ester is a low odor, light-colored ester of Tall Oil Rosin that has been stabilized to provide excellent performance and aging properties. The stability and polymer compatibility of this tackifier make it useful in a wide variety of adhesives, especially PSAs.

SYLVALITE ENDURA 99 rosin ester is an ester of stabilized Tall Oil Rosin. This innovative, light colored product has been formulated to provide excellent resistance to oxidation. When compounded in Ethylene Vinyl Acetate (EVA) hot melt adhesives, it provides notably improved color stability as compared to other tackifiers.