Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus | 2500.0 | MPa | ISO 178 |
Flexural Stress (3.5% Strain) | 66.0 | MPa | ISO 178 |
Tensile Modulus | 2300.0 | MPa | ISO 527 |
Tensile Stress at Yield | 44.0 | MPa | ISO 527 |
Tensile Elongation at Yield | 2.2 | % | ISO 527 |
Tensile Elongation at Break | 15.0 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | 85.0 | kJ/m² | ISO 179/1eU |
Impact Strength (Charpy, at -40°C) | 70.0 | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Charpy, at 23°C) | 17.0 | kJ/m² | ISO 179/1eA |
Notched Impact (Charpy, at -40°C) | 6.5 | kJ/m² | ISO 179/1eA |
Ball Indentation Hardness (H358/30) | 107.0 | MPa | ISO 2039-1 |
Value | Units | Test Method / Conditions | |
Density | 1060.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
Vicat B50 | 92.0 | °C | ISO 306 |
HDT / A (1.8 MPa) | 82.0 | °C | ISO 75-1/-2 |
Value | Units | Test Method / Conditions | |
Moisture Content | max. 0.2 | % | - |
Value | Units | Test Method / Conditions | |
Melt Temperature | 200 - 240 | °C | - |
Mould Temperature | 50 - 80 | °C | - |
Value | Units | Test Method / Conditions | |
Melt Index (MVR) | 30.0 | cm³/10min | ISO 1133 |
MVR Temperature | 220.0 | °C | - |
MVR Load | 10.0 | kg | - |
Shrinkage (24h) | 0.5 - 0.8 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-4 h
- 80 °C in an air circulating dryer for 3-6 h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.