Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
- Features, Benefits & Advantages
Ideal for priming substrates prior to installing torch applied modified membranes Water-based asphalt, safe to use, will not flash or burn in the liquid state
Applications & Uses
- Applications
- Uses
100 Non-Fibered Primer is a general utility primer for concrete, gypsum, masonry, brick and metal surfaces over which waterproofing, dampproofing, roof coatings, asphaltic membranes or other asphaltic products are to be applied. Use to prime surfaces for the installation of torch-applied modified bitumen membranes.
- Surface Preparations
All surfaces should be clean and free from oil, grease, dust, dirt and other foreign matter. Recommended application temperature is 40°F to 120°F. If applying at temperatures lower than 40°F, the substrate must be free of ice crystals.100 Non-Fibered Primer can be applied to damp surfaces. Dry surfaces may be dampened with water before application of 100 Non-Fibered Primer.
- Application
APPLICATION 100 Non-Fibered Primer is easily applied by brush, roller or airless spray equipment. When applying work primer into all cracks and crevices. When brushing apply with a soft wide fiber brush in even strokes, feathering the primer on the surface to obtain a smooth, uniform film.
- Coverage Rate
Apply at 1 to 2 gallons per 100 sq. ft. (16-32 wet mils) depending upon porosity and type of surface being primed.
Properties
- Physical Properties
| Value | Units | Test Method / Conditions | |
| Weight per Gallon | 8.5lbs | - | - |
| Solids by Weight | 52%Nominal | - | - |
| Solids by Volume | 49%Nominal | - | - |
| Color | Black | - | - |
| Permeance | 0.5 metric perms | - | - |
| Application Temp. | 40°F to 120°F | - | - |
| Dry Time | 2 to 4 hours @ 77°F and 50% Relative Humidity | - | - |
| Cure Time | 24 to 48 hours @ 77°F and 50% Relative Humidity | - | - |
| Service Temp (Cured Film) | -5°F to 180°F | - | - |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Caution
Do not apply when rain is imminent. Protect from freezing. Coating must be dried before exposure to water. Store in a heated room and keep container covered when not in use. Do not thin. Avoid prolonged contact with skin. Dispose of in an environmentally safe manner. Exterior use only.
Packaging & Availability
- Packaging Type
- Packaging
Available in 5-gallon pails and 55-gallon drums.