Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Base Chemicals Functions
- Cleaning Ingredients Functions
- CAS No.
- 26635-93-8
- EC No.
- 500-048-7
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Applicable Processes
- Base Chemicals End Uses
- Home Care Applications
- I&I Cleaning Applications
Properties
- Physical Form
- Appearance
- Liquid
- Soluble in
- Water, Ethanol, Propylene glycol, Isopropanol, Acetone, Isopropyl alcohol, Xylene, Low aromatic solvent, White spirit, Stoddard solvent
- Dispersible in
- Water
- Characteristics
- Specifications
- Note
Typical Data are based on our own measurements or derived from the literature. They do not constitute part of the delivery specification.
Value | Units | Test Method / Conditions | |
Active Content | 100 | % | |
Clear Point | -5 | °C | - |
Cloud Point (5 g in 25ml of 25/75% butyldiglycol/water) | 45 | °C | - |
Tertiary Amine | min. 96 | % | |
Foam Height according to Ross-Miles (after 5 min at 50°C in 0.05%) | 5 | mm | - |
Foam Height according to Ross-Miles (immediately at 50°C in 0.05%) | 10 | mm | - |
pH Value | 11 - 12 | - | - |
Flash Point | min. 200 | °C | - |
HLB (Davies scale 0-40) | 9.9 | - | - |
HLB | 9.9 | - | Davies Scale (0-40) |
Initial Boiling Point (at 760 mm Hg) | min. 300 | °C | - |
Initial Boiling Point (760mm Hg) | min. 300 | °C | - |
Viscosity (100 rpm) | 141 | cps | LV-2 spindle |
Pour Point | -5 | °C | - |
Specific Gravity (at 25°C) | 0.904 | - | - |
Surface Tension (according to Du Noüy at 25°C in 0.1%) | 28 | mN/m | DIN 53914 |
Vapor Pressure (at 20°C) | max. 0.1(20) | mm Hg | - |
Vapor Pressure (at 20°C) | max. 3(200) | mm Hg | - |
Viscosity (at 20°C, LV-2 spindle; 100 rpm) | 141 | cp | - |
Wetting Power (according to Draves, at 25°C, in 0.1%) | 600 | second | - |
Value | Units | Test Method / Conditions | |
Color | max. 6 | - | Gardner |
Amine Number | 155 - 164 | mg KOH/g | - |
Moisture Content | max. 1 | % | - |
Equivalent Mass | 345 - 365 | - | - |
Primary + Secondary Amine | max. 3 | % | - |
Water Content | max. 1 | % | - |
Regulatory & Compliance
- Chemical Inventories
Packaging & Availability
- Regional Availability
Storage & Handling
- Storage Conditions
Ethomeen O/12 should always be homogenized before use, unless the entire quantity is used.