Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Processing Information (Injection Molding)
- Rheological Properties
- Injection Moulding Processing Conditions
Under certain conditions the increased thermal conductivity must be considered.
| Value | Units | Test Method / Conditions | |
| Flexural Modulus | 4500.0 | MPa | ISO 178 |
| Flexural Strength | 94.0 | MPa | ISO 178 |
| Tensile Modulus | 6000.0 | MPa | ISO 527 |
| Tensile Strength | 60.0 | MPa | ISO 527 |
| Tensile Elongation at Break | 4.5 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | 32.0 | kJ/m² | ISO 179/1eU |
| Impact Strength (Charpy, at -40°C) | 25.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 6.0 | kJ/m² | ISO 179/1eA |
| Notched Impact (Charpy, at -40°C) | 4.0 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density | 970.0 | kg/m³ | ISO 1183 |
| Global Warming Potential (GWP) | 1.74 | kg CO₂ eq. | ISO 14040, 14044 |
| Value | Units | Test Method / Conditions | |
| Vicat B50 | 102.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 147.0 | °C | ISO 75-1/-2 |
| DSC (Melt Point) | 160.0 | °C | ISO 11357-1/-3 |
| Value | Units | Test Method / Conditions | |
| Moisture Content | max. 0.1 | % | - |
| Value | Units | Test Method / Conditions | |
| Surface Resistance | max. 1500 | Ohm | IEC 62631-3-2 |
| Specific Volume Resistance | 10.0 | Ohm*m | IEC 62631-3-1 |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 210 - 260 | °C | - |
| Mould Temperature | 30 - 60 | °C | - |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR) | 33.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 230.0 | °C | - |
| MVR Load | 2.16 | kg | - |
| Molding Shrinkage (parallel) | 0.5 | % | ISO 294-4, 2577 |
| Molding Shrinkage (normal) | 0.4 | % | ISO 294-4, 2577 |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 80°C in an air circulating dryer for 2-4h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light.