Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Flexural Modulus | 6500.0 | MPa | ISO 178 |
| Flexural Strength | 108.0 | MPa | ISO 178 |
| Tensile Modulus | 6900.0 | MPa | ISO 527 |
| Tensile Strength at Break | 80.0 | MPa | ISO 527 |
| Tensile Elongation at Break | 1.2 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | 18.0 | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 5.0 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density | 1080.0 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Vicat B50 | 102.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 101.0 | °C | ISO 75-1/-2 |
| Value | Units | Test Method / Conditions | |
| Moisture Content | max. 0.1 | % | - |
| Value | Units | Test Method / Conditions | |
| Surface Resistance | max. 100 | Ohm | IEC 62631-3-2 |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 230 - 270 | °C | - |
| Mould Temperature | 60 - 90 | °C | - |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR) | 12.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 220.0 | °C | - |
| MVR Load | 10.0 | kg | - |
| Shrinkage (Lengthwise, 24h) | 0.2 - 0.4 | % | ISO 294-4 |
| Shrinkage (Lateral, 24h) | 0.3 - 0.5 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- 80 °C in a dry air (dessiccant) dryer for 2-4 h
- 80 °C in an air circulating dryer for 3-6 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light.