Knowde Enhanced TDS
Identification & Functionality
- Cleaning Ingredients Functions
- Technologies
Features & Benefits
- Labeling Claims
- HII Features
Applications & Uses
- Markets
- Applications
- Home Care Applications
- I&I Cleaning Applications
- Recommended Uses & Known Applications
- Detergents : Used as a detergent and wetting agent in systems using temperatures in the boiling range.
- Emulsifier : Emulsifying agent for oils, fats, and waxes.
- Wetting Agent : Wetting agent in applications involving high concentrations of electrolytes.
Properties
- Appearance
- Off white, waxy solid
- Odor
- Mild, aromatic
- Insoluble in
- Mineral oil, Kerosene, Corn oil, Stoddard solvent
- Soluble in
- Water, Ethanol, Xylene, Ethylene glycol, Carbon tetrachloride, Butyl cellosolve
- Compatible with
- Anionic surfactants
- Stable in
- Bases, Acids, Salts
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Moles EO | 30.0 | - | - |
| HLB Value | 17.0 | - | - |
| Activity | min. 99.5 | % | - |
| Cloud Point (at 212°F, 1% Aqueous) | Clear | - | - |
| pH (1% in Water) | 5 - 7 | - | - |
| Flash Point | min. 500 | °F | - |
| Pour Point | 110.0 | °F | - |
| Specific Gravity (at 25ºC) | 1.07 | - | - |
| Weight (at 25°C) | 9.02 | lbs/gal | - |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Toxicity Information
This product is regarded as non-hazardous. However, it is considered to possess low acute oral and skin penetration. It should not be used in products for internal use.
Storage & Handling
- Storage, Stability and Handling Information
- It should not be mixed with concentrated oxidizing or reducing agents since the mixture of these compounds with organic compounds could form a potentially explosive mixture.
- T-Det “N” nonionic surfactants are stable non-corrosive products in an anhydrous state.
- They can be stored in plain steel tanks with piping, valves, and pumps of the same metal.
- Aqueous solutions of T-Det “N” surfactants must be stored in stainless steel or plastic lined tanks.
- The nonylphenol-ethylene oxide adducts are slightly hydroscopic. Where necessary, guard against atmospheric moisture pick-up, an inert gas blanket may be used.