Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
company tower banner
Braskem America Company Logo

SHC7260LS-L

1 of 41 products in this brand
SHC7260LS-L is a high-density polyethylene specially developed for injection molding applications. It offers high hardness and stiffness while exhibiting a low tendency to warp. This resin contains additives to protect against the damaging effects of ultraviolet radiation. With a minimum biobased carbon content of 94%, determined by ASTM D6866, this grade aligns with sustainable practices.

For more information regarding REACH, please visit Braskem's REACH site

Polymer Name: High Density Polyethylene (HDPE), High Density Polyethylene (HDPE) Compound

Processing Methods: Compression Molding, Injection Molding

Melt Flow Index: 7.2 - 7.2 g/10 min

Technical Data SheetSafety Data Sheet
Message our experts with questions
Abbey Kugel avatar

Abbey Kugel

Sales

Account Manager for PP Products, feel free to reach out and we will be happy to assist you!

Knowde Enhanced TDS

Identification & Functionality

Chemical Family

Polyethylenes,

Polyolefins

Polymer Name

High Density Polyethylene (HDPE),

High Density Polyethylene (HDPE) Compound

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Basic Thermoplastics

Polyolefins

Features & Benefits

Labeling Claims

Bio-based,

Low Carbon Footprint (PCF),

Sustainable,

Sustainable Polyethylene

Materials Features

Good Stiffness,

High Hardness,

Low Carbon Content,

Low Warpage,

UV Resistant

Applications & Uses

Plastics & Elastomers End Uses

Crates,

Pallets,

Safety Helmets

Plastics & Elastomers Processing Methods

Compression Molding,

Injection Molding

Properties

Physical Form

Granules,

Pellets,

Solid

Control Properties
ValueUnitsTest Method / Conditions
Melt Flow Rate (at 190°C, 2.16kg)7.2g/10 minASTM D1238
Density0.959g/cm³ASTM D792
Typical Properties - Plaque Properties
ValueUnitsTest Method / Conditions
Tensile Strength (at Yield) ᵃ29.0MPaASTM D638
Elongation (at Yield) ᵃ7.5%ASTM D638
Flexural Modulus (1% Secant) ᵇ1375.0MPaASTM D2240
Shore D Hardness ᶜ63.0-ASTM D2240
Izod Impact Strength ᵇ35.0J/mASTM D256
Deflection Temperature Under Load (at 0.455 MPa) ᵇ74.0°CASTM D648
Vicat Softening Temperature (at 10 N) ᵇ126.0°CASTM D1525
Note

Typical Properties - Plaque Properties:

  • Test specimens from compression molded plaque according to ASTM D4703. Plaque Thickness: a) 2mm. b) 3mm c) 6mm. NB = No break

Regulatory & Compliance

Certifications & Compliance

Comprehensive Environmental Response, Compensations & Liability Act (CERCLA)

Chemical Inventories

DSL (Canada),

TSCA (USA)

Quality Standards

In Preview