Products in Printing & Inks: Radiation Curable Adhesive

SHIKOH™ UV-3700B is UV curable urethane acrylate oligomer with high elongation and soft rubbery elasticity. It is relatively low viscosity despite its high molecular weight. EB and Thermal cure systems are also applicable. Features Soft elastic type, High elongation High molecular weight but relatively low viscosity Non-solvent (100% hardening ingredient) For UV adhesion with monomers Non-yellowing Applications Adhesive: UV/ EB/ Thermal-curable adhesive for electronics device, optical use and automotive use. 3D printer *SHIKOH™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

Deuteron® UV 1250 is a photoinitiator with 50.0% active content. In a liquid form, it serves various end uses such as radiation-curable adhesive, flexography ink, varnishes, screen printing ink, and laminating adhesive. The product presents itself as a brownish, viscous liquid, providing versatility in applications requiring photoinitiation properties.

Deuteron® UV 1242 consists of solutions incorporating bis(dodecyl phenyl)-iodonium hexafluoroantimonate dissolved in reactive solvents. The solution utilizes C12/C14 glycidyl ether as a reactive thinner and contains antimony. Notably, it ensures minimal benzene emissions and maintains a low-odor characteristic. This solution presents itself as a brownish, viscous liquid suitable for various applications within the specified context.

Deuteron® UV 2257 is a solution formulated with Bis-(4-methyl- phenyl)-iodoniumhexafluoro-phosphate dissolved in reactive solvents. This solution utilizes propylene carbonate as a reactive thinner. It boasts no benzene emissions and maintains a low-odor profile, ensuring a more environmentally friendly and user-friendly application.

Deuteron® UV 1240 is a solution formulated with Bis(dodecyl phenyl)-iodonium hexafluoroantimonate dissolved in reactive solvents. The solution includes antimony and utilizes propylene carbonate as a reactive thinner. Notably, it ensures minimal benzene emission and maintains a low odor profile. This solution manifests as a reddish, viscous oil, suitable for various applications within the specified context.

MEDOL-10 has a novel unique structure. It was developed for replacement of THFA, tetrahydrofurfuryl acrylate. MEDOL-10 only has exclamation pictogram on REACH. Its viscosity is low enough for many applications like UV inkjet ink. Some of paper said high polarity pendant group induces high curing speed [1]. Dioxolane structure induces high solvency as same as THFA because both THF and dioxolane are good solvent.

Deuteron UV 1250 may be used as a UV initiator for all binders that can be cationically polymerized, particularly epoxides used in the printing ink sector. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1250.Deuteron UV 1250 enables the cationic polymerization of special binder systems through a starting reaction. Deuteron UV 1250 is soluble in these binder systems including common solvents and reactive diluents. back

The photoinitiator Deuteron UV 1242 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1242 is soluble in these binder systems including the usual solvents and reactive diluents.Deuteron UV 1242 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly silicones and epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1242. back

MPD Industries UVP 0203 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is a high boiling monomer with low vapor pressure.It is compatible with a wide range of acrylated resins.

MPD Industries UVP 0600 99 is a difunctional Bisphenol A epoxy acrylate. This product is characterized by its light color and high reactivity.It is mainly contributed by the epoxy resin backbone consisting of Bisphenol A and epichlorohydrin reaction product. The two acrylic groups contribute the excellent UV and EB curing properties.

UVP 0401, Pentaerythritol tetracrylate (PETA) is a liquid monomer with fast cure response and low volatility during free radical polymerization. It has a low skin irritancy and high cross density upon curing.

UVP 0820 is trifunctional low viscosity acrylated polyester oligomer with low film shrinkage. It has good pigment wetting.

UVP 0303, Di-­Trimethylol propane tetracrylate (DiTMPTA) is a liquid monomer with fast cure response and low volatility during free radical polymerization.It has a low skin irritancy and high cross density upon curing.

UVP 0302, Ethoxylated(3) Trimethylol propane triacrylate (Etho .TMPTA) is a low viscosity liquid monomer with fast cure response and low volatility during free radical polymerization.It has a low skin irritancy.

Deuteron UV 1240 may be used as a UV hardener for all binding agents that can be cationically polymerized, particularly epoxides. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 1240.The photoinitiator Deuteron UV 1240 hardens binder systems that polymerize cationically under UV exposure. Deuteron UV 1240 is soluble in these binder systems including the usual solvents and reactive diluents. back

MPD Industries UVP 0810 99 is difunctional acrylated polyester oligomer. It has good lithographic behavior pigment wetting and fast cure response. It is recommended for use in lithographic and flexographic ink formulations.

MPD Industries UVP 0225 99 is a aliphatic urethane diacrylate oligomer. Films of UVP 0225 cured by ultraviolet light exhibit good flexibility light color and good adhesion to various substrates. It has excellent resistence to polar solvent and has good chemical resistence.

MPD Industries UVP 0815 99 is difunctional low viscosity acrylated polyester oligomer. It has good pigment wetting properties. It exhibits excellent water balance and good color for development in offset printing application. It is recommended for plastic substrates especially PVC polystyrene and polyolefins.

MPD Industries UVP 0202 99 is a Di functional monomers, which polymerize when expose to sources of free radicals. It is compatible with a wide range of acrylated resins. It is low odor and good flexible monomer. It is a fast curing monomer with low valatility & a hydrophobic backbone.

Deuteron UV 2257 may be used as a UV initiator for all binders that can be cationically polymerized, particularly epoxides used in the printing ink sector. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 2257.Deuteron UV 2257 enables the cationic polymerization of special binder systems through a starting reaction. Deuteron UV 2257 is soluble in these binder systems including common solvents and reactive diluents. back

Deuteron UV 3100 may be used as a UV initiator for all binders that can be cationically polymerized, particularly epoxides used in the printing ink sector. Alkaline additives should be avoided because they impair the effectiveness of Deuteron UV 3100.Deuteron UV 3100 enables the cationic polymerization of special binder systems through a starting reaction. Deuteron UV 3100 is soluble in these binder systems including common solvents and reactive diluents. back

UVP 0204, Neo-­Pentyl Glycol diacrylate (NPGDA) is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It has good chemical resistence and high reactivity .It is compatible with a wide range of acrylated resins.

MPD Industries UVP 0612 99 is a difunctional epoxidesed soyabean oil acrylate oligomer that offers very good pigment wetting characteristics and produces flexible well adhering free radically cured films. It has low skin irritancy and suitable for flow and leveling of UV/EB curable ink and coating.

UVP 0205, Di Propylene glycol diacrylate (DPGDA) is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is an excellent low viscosity economical diluent .It is compatible with a wide range of acrylated resins.

MPD Industries UVP 0206 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is a low odor and good flexible monomer. It is compatible with a wide range of acrylated resins.

UVP 0611, is a fatty acid based difunctional Bisphenol A based epoxy acrylate oligomer that offers very fast cure speeds and chemical resistence. It imparts toughness and flexibility to cured lithographic and screen inks also to plastic and wood coatings.

MPD Industries UVP 0201 99 is a Difunctional monomers, which polymerize when, expose to sources of free radicals. It is compatible with a wide range of acrylated resins. It is low odor and good flexible monomer.

UVP 0825 is tetrafunctional low viscosity acrylated polyester oligomer with low film shrinkage. It has a high cross link density which helps to enhance abrasion and solvent resistence.

UVP 0835 is hexafunctional acrylated polyester oligomer. It adds fastcure response, hardness and abrasion resistence to UV/EB curable inks coatings and adhesives.

ADDAPT PolySurF ACE is a solvent free polymerisable additive. It imparts benefits like: acid resistance, high gloss, excellent pigment wetting, water repellence, film appearance, UV stability and improved adhesion to thermoplastics. It is the Acrylic Acid adduct of the epoxy ester of Versatic Acid.

UVP 0301 is an aliphatic trifunctional acrylate of low viscosity and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an effective reactive diluent with excellent solvency and viscosity reducing characteristics in UV/EB curable formulations based on epoxy,

ADDAPT PolySurF HPL is a solvent-free UV-curable additive. It can also act as a polymerisable lipophilic non-ionic surfactant and/or polymerisable plasticizer. It is a proprietary mixture of Acrylated mono-and di-Phosphate ester: the mono-Phosphate ester being O-C12-C14 modified; where the reactive Acrylate group is Methacrylate.

Omnirad 369 is a highly efficient UV-curing agent used to initiate the photo polymerization of chemically unsaturated prepolymers – e.g., acrylates – in combination with mono- or multifunctional monomers.

MPD Industries UVP 0610 99 is a di functional Bisphenol A epoxy acrylate oligomer gel. This product is characterized by its light color and high reactivity. It is mainly contributed by the epoxy resin backbone consisting of Bisphenol A and epichlorohydrin reaction product. The two acrylic groups contribute the excellent UV and EB curing properties.