Products in Paper & Pulp: Chemical Resistant

Aegis® H85NP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown BOPA film. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

Aegis® PIR-H85NP resin from AdvanSix contains 100% post-industrial recycled (PIR) raw materials while providing the same top performance and processability as Aegis® H85NP, its standard, non-recycled counterpart.Aegis® PIR-H85NP is a medium viscosity, nylon 6 extrusion grade homopolymer for cast or blown BOPA film. It offers a combination of strength, toughness and thermoforming properties as well as excellent heat, chemical and abrasion resistance.

DCL 2188 Naphthol Red, PR.188 is a bright, yellow-shaded naphthol red with good flow properties, bleed resistance, lightfastness, and weather fastness. It is recommended for higher-grade exterior industrial paints, exterior trade sales coatings, colorant systems for in-plant tinting or machine colorants, printing inks, mass coloration of paper, paper surface coating, paper pulp coloration, wax crayons, and inks for wallpaper use. It is also recommended for use in plastics.

Goonvean Fibers TEC03CON406 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

Polyslick® Rocket Plate is a 100% virgin UHMW-PE (Ultra High Molecular Weight Polyethylene) sheet product with hemispherical nodules on one side designed to reduce surface contact facilitating easier movement and rotation of heavy material in any direction. Low friction, lightweight, impact resistant, and cost effective are just some of Rocket Plate's features along with being easy to install and requiring virtually no maintenance.

FBT 1000 is a FKM With PTFE Film, wire mesh and aramid. 3.54mm”; Single Ply Wire EPDM Belt.

Polyslick® UHMW Rod exhibits all of the durable qualities of our Polyslick® UHMW Sheet making it perfect for the application where sheet stock is not suitable. The material is ideally suited for the manufacture of bushings, bearings, rollers, and augers as there is much less wasted material than if the material was made out of sheet stock. Polyslick® UHMW Rod is available in up to 10 inches in diameter and is available out of stock in natural virgin and black reprocessed grades.

FBT 1001 is a FKM With PTFE Film and wire mesh. 3.54mm”; Single Ply Wire EPDM Belt

GAR-DUR® UHMW-PE plastic parts are made from ultra high molecular weight (UHMW) polymer having a molecular weight of 4.2 million and greater. Garland Manufacturing Company has been processing UHMW resin for over 45 years. This true UHMW polymer is excellent for resisting abrasion and corrosion while contributing a low coefficient of friction. Fabricated Gar-Dur® parts have helped companies improve performance, reduce downtime, eliminate the need for lubrication, replace steel parts and lower their operating costs.

MECHETEC® PET from Polymer Industries is a semi-crystalline polyester terephthalate (PET) polymer that exhibits excellent strength, rigidity, and is easily machined. Additionally, this material offers dimensional stability and wear resistance that meets or exceeds that of nylon or acetal. Due to it’s superior chemical resistance and food contact approvals, MECHETEC® PET stock shapes are the preferred material for components in food processing applications such as pistons, valves, feed screws, and food product forming and extrusion dies. Additionally, the low moisture absorption and low rate of thermal expansion offered by MECHETEC® PET makes it ideal for demanding applications that require close tolerance, precisely machined component parts. Formally known as Unipet PET. For more Info : Click Here

Goonvean Fibers TEC03CON407 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

RL292 can withstand constant temperature extremes of -65˚ F to 450˚ F (-54˚ C to 232˚ C) with brief excursions to 600˚ F (316˚ C). Silicone-coated Pyroglas® cloths have excellent resistance to most chemicals and oils, and have indefinite shelf life at room temperature. Alpha Associates silicone-coated Pyroglas® cloths are made from proprietary high grade silicone rubber and non-asbestos fiberglass material, to AMS 3320 Rev. G.

Since its introduction in 1938, Nylon has become one of the world’s most widely recognized and utilized engineering grade thermoplastics. Nylon’s unique combination of high strength, good toughness, outstanding chemical resistance, and excellent wear and abrasion resistance have made it the material of choice for product designs in a multitude of industries. When used to replace wear grade metals like brass and bronze, no other material provides the combination of extended wear life, light weight, and low fabricated part cost of Nylon. Polymer Industries manufactures MECHETEC® Nylon stock shapes in a wide variety of types and stock shape configurations including glass filled and molybdenum disulfide (MoS2 or moly) filled options. Formally known as Unipa Nylon. For more Info : Click Here

Compro FR-60-P is a safe, non toxic, non halogen, flame retardant in a polyol Consisting of 3000 molecular weight triol with a hydroxyl value of 54-57 mg. It is designed for flexible foams. Other polyols with our flame retardant are also available and can be used on polyester, epoxy, and a variety of other coatings including plastics in aromatic systems. In aliphatic systems, request Compro FR-60-PA. They provide a variety of features for these coatings outside of excelled flame retardancy such as impact strength, flexibility, and water repellency. On saturated polyester resins cured with melamine such as our Compromel, Compro FR-60-P will impart film thickness and greater chemical resistance. In PET coatings it will facilitate cast and mold properties and reduce stress and strain afterwards.

Goonvean Fibers TEC03CON315 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

Sino Polymer MFE 711, formerly known as MFE-11, is a premium standard Bisphenol-A type epoxy vinyl ester resin. It provides resistance to a wide range of acids, alkalis, bleaches and solvents used in many chemical processing industry applications.

Goonvean Fibers TEC03CON316 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

Polymer Industries' Densetec® HMW is the extruded material needed when Densetec® HDPE is not enough and Polyslick® UHMW is not necessary. Densetec® HMW has higher impact strength than HDPE and is more abrasion resistant. The fact that Densetec® HMW is more wear resistant than standard HDPE, and is more economical than standard UHMW makes it the ideal material for wear applications and machined parts. It may also be used in applications such as snowplow linings and fertilizer spreaders.

Goonvean Fibers TEC03CON404 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

Goonvean Fibers TEC03CON487 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

RL 7542 is silicone fiberglass with aramid. 0.0625" ; 1 Ply Aramid Inserted Silicone Belt.

Goonvean Fibers TEC03CON313 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

Goonvean Fibers TEC03CON408 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.

Goonvean Fibers TEC03CON311 are precision cut acrylic fibers with excellent heat and chemical resistant properties used for reinforcement in a wide variety of industrial applications.