Products in Oil, Gas & Mining: Impact Resistance

VESTAMID® NRG 1001 is a high-viscosity, plasticized, and impact-modified PA 12 compound with heat and light stabilizers for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. It offers easy processing and good dimensional control during pipe extrusion, especially for large pipe diameters.

SP Series™ SHP1200-1 is a ultra high molecular weight polyethylene (UHMWPE) polymer in powder form. These unique materials exhibit very high toughness. SP Series™ materials are pure polyethylene with broad regulatory compliance and contain no residual chemicals or additives that may interfere with some application requirements. SP Series™ powders are well suited for use in water, chemical and gas filter applications. SHP1200-1 can be independently sintered into a filter or used as a binder for activated carbon filter.

Fulflex® Anti-abrasion Rubber Sheets is designed for high wear and tear resistance and is well suited for lining and protective coverings in the mineral, metal, material handling, and mining industries.Features/BenefitsHigh abrasion resistance.Excellent wear and impact resistant properties.

Pure very high molecular weight high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~75 micron. Molecular weight of approximately 500,000.

Pure ULTRA high molecular weight high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~70- micron. Molecular weight in excess of 2,000,000.

Pure ULTRA high molecular weight high density polyethylene homopolymer polymer in finely sized rounded powder form. Avg. = ~130- micron. Molecular weight in excess of 2,000,000.

Nylacast Impact is a grade specifically developed for applications requiring high impact resistance and/or noise reduction capabilities. The important characteristics of these materials are their improved insensitivity against stresses, sharp edges, notches, scratches etc. Impact is ideally suited to applications such as support rollers for the aggregate processing industry, dollies used in conjunction with piledrivers and crane feet pads as well as roller coaster wheels in relation to noise reduction. However there are many industries and applications where this type of material would be very beneficial over the basic grade of Natural cast nylon.

RE-FLEX® 790A is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

RE-FLEX® 885AJL is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

RE-FLEX® 470A is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

RE-FLEX® 585A is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

RE-FLEX® 785A is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

Moharamplast HDPE MP6020-100 (BLACK) is a bimodel molecular structure compound classified as PE100. It is a black high density polyethylene compound.It has high tensile strength and excellent resistance against fast and slow crack propagation. It also shows very high impact resistance throughout its entire temperature range combined with an acute resistance to fracture.

RE-FLEX® 1592AJL is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

RE-FLEX® 780AJLM is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

Nylacast Aquanyl PA 6/12 is a copolymer of nylon 6 and nylon 12 produced via the anionic polymerization process using the monomer’s of caprolactam and Laurinlactam. Laurinlactam has a similar effect to a plasticizer, but being a copolymer does not suffer the “Leeching out” problems of many plasticisers. The aim is to impart a greater degree of resilience to the material, for which purpose the copolymerisation method is very successful.

RE-FLEX® 1588AJL is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

RE-FLEX® 580AXL is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

RE-FLEX® 795AS is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

Polikim Kestamid®(PA6G-Cast Nylon) is one of the most commonly used engineering plastics.

RE-FLEX® 790AJL is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.

RE-FLEX® 570A is highly versatile and can be easily processed by injection molding, extrusion, blow molding, vacuum forming, solution coating and compounding. Parts made from RE-FLEX can be welded, sterilized, printed, painted, laser marked, colored, machined and die-cut.