Products in Military & Defense: Phenols & Phenolics

Plenco® 06582 is a rubber modified phenolic molding compound, offering excellent heat resistant properties, along with improved mechanical strength at elevated temperatures. UL recognized under component file E40654. 06582 is available in black.

Plenco® 06401 is a glass fiber and mineral filled two-stage phenolic molding compound. UL recognized under component file E40654. 06401 is available in black.

Plenco® 06500 is a glass-reinforced phenolic molding compound offering improved strength, dimensional stability, and excellent electrical properties. UL recognized under component file E40654. 06500 is available in black.

Plenco® 06301 is an inorganic reinforced phenolic molding compound, offering excellent heat resistance, dimensional stability, and processability. Customers have found this material useful for automotive applications. It is not intended for electrical insulating applications. 06301 is available in black.

Plenco® 06343 is a mica reinforced phenolic molding compound, offering for a low power factor, low electrical losses, and good electrical properties after long exposures to high humidity. UL recognized under component file E40654. 06343 is available in natural color.

Plenco® 06553 is a mineral and glass fiber reinforced two-stage phenolic molding compound, formulated for dimensional stability, good chemical resistance to brake fluids, such as DOT 3 and 4, and should provide grinding to close tolerances. 06553 is UL recognized under component file E40654. 06553 is available in black. 06553 was qualified under military specification MIL-M 14 (superseded by ASTM D-5948) TYPE MFH and batches can, if requested and paid for, be tested for certification to the standard.

Plenco® 06404 is a glass fiber and mineral filled two-stage phenolic molding compound offering superior molded mechanical properties, especially tensile strength. Plenco® 06404 is available in black. Plenco® 06404 is UL recognized under component file E40654.

Plenco® 06310 is a glass and mineral filled phenolic molding compound offering excellent heat resistance and dimensional stability. 06310 is available in black.

Champion Technologies 1177G is a canvas phenolic material infused with graphite that is strong and wear resistant.

Resinoid 2089 is a chopped fabric reinforced, two-step phenolic molding compound offering good physical and wear properties. This product has been specifically formulated for mechanical applications where minimal wear and low shrinkage values are desired. This material comes in bulk fabric form and is suitable for compression molding.

Resinoid 2016P is a fabric reinforced, two-step phenolic molding compound offering excellent resistance to mechanical shock. It is supplied in pellet form suitable for transfer and compression molding. This material can also be used in injection molding systems with deep flight screws

PVB Phenolic resins are a family of thermoset resins that display outstanding structural rigidity, toughness, and adhesive strength. They are used primarily in ballistic helmet and vehicle applications once impregnated into high performance aramid fabrics. These fabrics offer exceptional ballistic performance in vehicle spall liner applications and versus fragmentation threats, as well as excellent structural and thermal properties. Standard configurations conform to MIL-DTL-62474 aramid fabric reinforced laminates for composite armor.

Resinoid 2005 is a cellulose reinforced, two-step phenolic molding compound. It exhibits excellent electrical and thermal properties and dimensional stability. This material comes in pelletized from and is suitable for transfer or compression molding. It can be preformed on automatic equipment.

Resinoid 2277 is a chopped fabric reinforced, two-step phenolic molding compound. It was specifically developed for molding applications where a lightweight, high strength material with good impact strength is needed. This material comes in pelletized from and is suitable for transfer or compression molding and can be used in injection molding systems with deep flight screws. Resinoid 2277 meets the requirements of ASTM D-5948 CFI-20 (Formerly MIL M14/1 CFI-20).

Resinoid 2002-4A is a fabric reinforced, two-step phenolic molding compound. It has been modified to meet gear requirements and other stressed applications. It possesses excellent impact and flexural strength. It is available in bulk form and is recommended for compression or transfer molding.

Champion Technologies 1177 is durable and long-lasting.

PSR133 is a high performance phenolic resin available in neat resin and prepreg form. Prepregs manufactured with PSR 133 meet the stringent requirements of MIL-R-9299C, Grade B. PSR133 is the most cost effective phenolic available and offers excellent char yield for carbon/carbon applications and does not exhibit micro-cracking in high modulus composite structures.

Resinoid 2215 is an organic fiber reinforced compound offering moderate impact strength. This product is available in a small pellet suitable for compression, transfer and injection molding.

Phenolic resins are renowned for their excellent high temperature resistance, flame resistance, low smoke generation and low toxicity in fire situations. Phenolics are used in vehicle armor applications that utilize these properties in combination with E-glass and other high performance glass fibers. Phenolics are very rigid, although toughened versions are available with reduced temperature resistance.

Resinoid 2002-C5 is a fabric reinforced, two-step phenolic molding compound. It has improved heat distortion and dimensional stability. It has been formulated to exhibit excellent wear resistant properties. It is available in bulk form and is recommended for compression or transfer molding.

Resinoid 2020 is a fabric reinforced, two-step phenolic molding compound. It exhibits excellent moldability in transfer molding. It possesses excellent dimensional stability and impact strength properties. It is available in bulk form and is recommended for compression or transfer molding.

Resinoid 2101 is an organic fiber reinforced, two-step phenolic molding compound. It was specifically developed for molded parts requiring nominal mechanical strengths and excellent electrical properties. This material comes in pelletized form an d in grades suitable for injection, transfer or compression molding.

Resinoid 2016 is a fabric reinforced, two-step phenolic molding compound. It is available in bulk form and is recommended for compression or transfer molding.