Products in Other Electrical & Electronics Applications: Processing ...

BRUGGOLEN® Recycling R8895 is a recycling additive for polyolefines. It is used for upcycling Polypropylene from car battery cases: Repair of damage in the polymer chains by a novel chemical system. High-quality recyclates for demanding long-term applications Prolonged retention of mechanical properties during long-term heat aging. Neutralization of acidic contaminations. One-Pack solution stabilizes the recycling process. Bruggolen® R recycling additives improve the polyolefin recycling processes and help recyclers to produce higher-value polyolefine recyclates for long-term applications. For the first time, the new repairing technology allows repairing damages from prior use.

MicroFLON S-Series powders are Natural Prime PTFE micronized to various particle sizes. In thermoplastics and elastomers, MicroFLON® S facilitates lubrication and wear resistance. The tight process and particle size control typical of the MicroFLON® product line allows for easy dispersion, and distribution of the product.

MicroFLON S-Series powders are Natural Prime PTFE micronized to various particle sizes. In thermoplastics and elastomers, MicroFLON® S facilitates lubrication and wear resistance. The tight process and particle size control typical of the MicroFLON® product line allows for easy dispersion, and distribution of the product.

MicroFLON T-Series powders are recycled PTFE micronized to various particle sizes. MicroFLON® T-Series is based on recycled PTFE powder that offers an attractive alternative to costly virgin PTFE. As confirmed in recent independent testing, MicroFLON® T offers superior coefficient of friction and wear resistance in both nylon and polyoxymethylene when compared against virgin PTFE. Recycled PTFE also offers a significant reduction in carbon footprint relative to the use of prime PTFE.

MicroFLON S-Series powders are Natural Prime PTFE micronized to various particle sizes. In thermoplastics and elastomers, MicroFLON® S facilitates lubrication and wear resistance. The tight process and particle size control typical of the MicroFLON® product line allows for easy dispersion, and distribution of the product.

MicroFLON S-Series powders are Natural Prime PTFE micronized to various particle sizes. In thermoplastics and elastomers, MicroFLON® S facilitates lubrication and wear resistance. The tight process and particle size control typical of the MicroFLON® product line allows for easy dispersion, and distribution of the product.

MicroFLON T-Series powders are recycled PTFE micronized to various particle sizes. MicroFLON® T-Series is based on recycled PTFE powder that offers an attractive alternative to costly virgin PTFE. As confirmed in recent independent testing, MicroFLON® T offers superior coefficient of friction and wear resistance in both nylon and polyoxymethylene when compared against virgin PTFE. Recycled PTFE also offers a significant reduction in carbon footprint relative to the use of prime PTFE.

MicroFLON T-Series powders are recycled PTFE micronized to various particle sizes. MicroFLON® T-Series is based on recycled PTFE powder that offers an attractive alternative to costly virgin PTFE. As confirmed in recent independent testing, MicroFLON® T offers a superior coefficient of friction and wear resistance in both nylon and polyoxymethylene when compared against virgin PTFE. Recycled PTFE also offers a significant reduction in carbon footprint relative to the use of prime PTFE.

Trecora Chemical CWP400E is a polyethylene wax. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Exhibits abrasion-, rub- and mar resistance. Provides anti-block, release and gloss control properties. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can be used to control gloss to achieve a desired matt effect. CWP400E by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Cel-Span® Process Aid 332 is a non-clear compounded product containing a high level of thermal stabilizers and CAC0₃ to provide protection of film resins during high temperature extrusion and lamination processes, thus maximizing inherent physical properties of the natural al resins. CelSpan® Process Aid 332 eliminates build up in both internal and external metal surfaces of the extrusion die, as well as reduction of wrinkles in thin gage films. This product will extend Tio₂ up to 5% without loss of opacity.

Trecora Chemical CWP2030 is a polyethylene wax. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can be used to control gloss to achieve a desired matt effect. CWP2030 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Trecora Chemical CWP400 is a polyethylene wax. Exhibits abrasion-, rub- and mar resistance. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can be used to control gloss to achieve a desired matt effect. CWP400 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Trecora Chemical OX-7 is an oxidized polyethylene wax. It is easily emulsified. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Can be used to control gloss to achieve a desired matt effect. OX-7 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Trecora Chemical CWP500E is a polyethylene wax. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can be used to control gloss to achieve a desired matt effect. CWP500E by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Cel-Span® Process Aid 610L is a processing concentrate in a compatible resin carrier used in extrusion and injection processes to enhance flow and reduce the processing temperature while increasing productivity for all types of polyolefin resins. Cel-Span® Process Aid 610L contains a unique additive that enhances the flow characteristics of polyolefin resins, reduces cycle time, while improving mold filling in multiple cavity molds. In extrusion and blow molding applications, Cel-Span® Process Aid 610L enhances flow and reduces processing temperature of polyolefin resins as much as 30 to 50 degrees. This reduction in processing and melt temperatures results in less polymer degradation, better color, lower cycle time and higher output especially in sheet, injection molding,and blow molding applications, and extrusion applications.

Trecora Chemical CWP500 is a polyethylene wax. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Imparts a non-stick character to a coating that decreases the tendency for blocking. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can be used to control gloss to achieve a desired matt effect. CWP500 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Trecora Chemical CHU561 is a polyethylene wax. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax.

Golden Dragon Chemicals ACR-JX series products are the new generation of acrylate macromolecule copolymer. It was produced by using advanced polymerization and desiccation technical on the bases of our years producing experience. As it has low dust, non-corrosive, excellent fluidity and don’t dissolve in water, it was considered to be an ideal processing modifier of PVC.

Cel-Span® Process Aid 101 is a 100% active (powder or pellet) internal lubricant processing aid with anti-static properties that are incorporated into the resin. Cel-Span® Process Aid 101 eliminates the need for an external mold release agent and improves resin flow, dispersion, resin additives ex:(reinforcements, fillers, and pigments), and reduces cycle time. The use of Cel-Span® Process Aid 101 will not have an adverse effect on the physical properties. Compatible with Polyethylene, Polystyrene, and Polypropylene.

Cel-Span® Process Aid 333 is a compounded product intended for clear films containing a high level of thermal stabilizers to provide protection of film resins during high temperature extrusion and lamination processes, thus maximizing inherent the natural resins. Cel-Span® Process Aid 333 eliminates build up in both internal and external metal surfaces of the extrusion die, as well as reduction of wrinkles in thin gage films.

Trecora Chemical CWP130X is a polyethylene wax. Imparts a non-stick character to a coating that decreases the tendency for blocking. Provides anti-block, release and gloss control properties. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can be used to control gloss to achieve a desired matt effect. CWP130X by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Trecora Chemical OX-18 is an oxidized polyethylene wax. Provides anti-block, release and gloss control properties. It is easily emulsified. Imparts a non-stick character to a coating that decreases the tendency for blocking. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can aid in the resistance properties of a coating. Can be used to control gloss to achieve a desired matt effect. OX-18 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Trecora Chemical CHU610 is a polyethylene wax. Provides anti-block, release and gloss control properties. Imparts a non-stick character to a coating that decreases the tendency for blocking. Can aid in the resistance properties of a coating. Salt spray resistance of an exterior coating that will be exposed to severe weathering can be improved by adding a barrier enhancing wax. Unwanted transfer or adhesion of coating to a contacted surface is thus prevented. Can be used to control gloss to achieve a desired matt effect. CHU610 by Trecora Chemicals is used in powder coatings, can coatings, coil coatings and wood/furniture coatings.

Cel-Span® Process Aid 305 contains a powerful water-seeking additive that chemically combines and eliminates lensing and porosity in blown and cast extrusion, injection, compounding, and pipe applications caused by surface moisture or incorporated into the resin during processing. CelSpan® Process Aid 305 contains a very effective additive that chemically traps water to eliminate moisture. This product can be used to eliminate moisture in high temperature engineering resins such as nylon and is utilized by metering in at 2% - 5% depending on the level of moisture.

Cel-Span® Process Aid 705 is a product recommended as a replacement for the traditional phenolic and hindered amine combination for the thermal and ultraviolet stabilization of polyester resins during high temperature processing. Cel-Span® Process Aid 705 enhances the process window of Polyester and PET resins. In addition, this product maintains the IV (Intinsic Viscosity) of Polyester and PET resins coupled with excellent UV stability. Cel-Span® Process Aid 705 also provides protection to caustic environment and bleach resistance to Polyester and PET resins with both bottle and fiber grade products. It is important that this product be used at 2% - 3% with the Polyester or PET resin before the fabrication or molding process to take advantage of the excellent properties of the unique masterbatch. It will insure that the polyester resin is protected through the molding and life cycle of the parts

Cel-Span® Process Aid 701 is a molecular concentrate used as a replacement for the traditional metal halides for stabilization of Nylons at high temperatures. This product is used at 1% - 3% active level depending on the type of compound and processing conditions. Cel-Span® Process Aid 701 also provides gloss, ozone, and bleach resistance to nylon fibers, without the use of metal halide stabilizers.

Non-O-Sil ASD Nan-O-Sil ASD is a unique colloidal silica processing aid from Energy Strategy Associates, Inc. slashes molding cycle times. Ultra-fine bright white silica particles have been shown in laboratory and commercial field trials to reduce injection molding cycle times by 20% to 30% in polypropylene, filled and unfilled nylon, PBT, Acetal, glass filled PC, PPS, PEEK, and Rigid PVC (read more: PVC Results Summary | Nanosil ASD Study). This processing advantage is accompanied by retention and improvements in key physical properties at low loadings (0.8% wt.).